| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use RCU-safe iteration in dev_map_redirect_multi() SKB path
The DEVMAP_HASH branch in dev_map_redirect_multi() uses
hlist_for_each_entry_safe() to iterate hash buckets, but this function
runs under RCU protection (called from xdp_do_generic_redirect_map()
in softirq context). Concurrent writers (__dev_map_hash_update_elem,
dev_map_hash_delete_elem) modify the list using RCU primitives
(hlist_add_head_rcu, hlist_del_rcu).
hlist_for_each_entry_safe() performs plain pointer dereferences without
rcu_dereference(), missing the acquire barrier needed to pair with
writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,
POWER), a reader can observe a partially-constructed node. It also
defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race
detection.
Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()
as the lockdep condition, consistent with the rcu_dereference_check()
used in the DEVMAP (non-hash) branch of the same functions. Also fix
the same incorrect lockdep_is_held(&dtab->index_lock) condition in
dev_map_enqueue_multi(), where the lock is not held either. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: handle empty bo and UAF races
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
(cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate dacloffset before building DACL pointers
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: add a bunch of missing ceph_path_info initializers
ceph_mdsc_build_path() must be called with a zero-initialized
ceph_path_info parameter, or else the following
ceph_mdsc_free_path_info() may crash.
Example crash (on Linux 6.18.12):
virt_to_cache: Object is not a Slab page!
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400
[...]
Call Trace:
[...]
ceph_open+0x13d/0x3e0
do_dentry_open+0x134/0x480
vfs_open+0x2a/0xe0
path_openat+0x9a3/0x1160
[...]
cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400
[...]
kernel BUG at mm/slub.c:634!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
RIP: 0010:__slab_free+0x1a4/0x350
Some of the ceph_mdsc_build_path() callers had initializers, but
others had not, even though they were all added by commit 15f519e9f883
("ceph: fix race condition validating r_parent before applying state").
The ones without initializer are suspectible to random crashes. (I can
imagine it could even be possible to exploit this bug to elevate
privileges.)
Unfortunately, these Ceph functions are undocumented and its semantics
can only be derived from the code. I see that ceph_mdsc_build_path()
initializes the structure only on success, but not on error.
Calling ceph_mdsc_free_path_info() after a failed
ceph_mdsc_build_path() call does not even make sense, but that's what
all callers do, and for it to be safe, the structure must be
zero-initialized. The least intrusive approach to fix this is
therefore to add initializers everywhere. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()
If overlay is used on top of btrfs, dentry->d_sb translates to overlay's
super block and fsid assignment will lead to a crash.
Use file_inode(file)->i_sb to always get btrfs_sb. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: hold claim backbone gateways by reference
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid dereferencing log items after push callbacks
After xfsaild_push_item() calls iop_push(), the log item may have been
freed if the AIL lock was dropped during the push. Background inode
reclaim or the dquot shrinker can free the log item while the AIL lock
is not held, and the tracepoints in the switch statement dereference
the log item after iop_push() returns.
Fix this by capturing the log item type, flags, and LSN before calling
xfsaild_push_item(), and introducing a new xfs_ail_push_class trace
event class that takes these pre-captured values and the ailp pointer
instead of the log item pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: publish jinode after initialization
ext4_inode_attach_jinode() publishes ei->jinode to concurrent users.
It used to set ei->jinode before jbd2_journal_init_jbd_inode(),
allowing a reader to observe a non-NULL jinode with i_vfs_inode
still unset.
The fast commit flush path can then pass this jinode to
jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and
may crash.
Below is the crash I observe:
```
BUG: unable to handle page fault for address: 000000010beb47f4
PGD 110e51067 P4D 110e51067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
RIP: 0010:xas_find_marked+0x3d/0x2e0
Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02
RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246
RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003
RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10
RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec
R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000
R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88
FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
filemap_get_folios_tag+0x87/0x2a0
__filemap_fdatawait_range+0x5f/0xd0
? srso_alias_return_thunk+0x5/0xfbef5
? __schedule+0x3e7/0x10c0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? cap_safe_nice+0x37/0x70
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
filemap_fdatawait_range_keep_errors+0x12/0x40
ext4_fc_commit+0x697/0x8b0
? ext4_file_write_iter+0x64b/0x950
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? vfs_write+0x356/0x480
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
ext4_sync_file+0xf7/0x370
do_fsync+0x3b/0x80
? syscall_trace_enter+0x108/0x1d0
__x64_sys_fdatasync+0x16/0x20
do_syscall_64+0x62/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
```
Fix this by initializing the jbd2_inode first.
Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after
initialization. Readers use READ_ONCE() to fetch the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc()
At the end of this function, d is the traversal cursor of flist, but the
code completes found instead. This can lead to issues such as NULL pointer
dereferences, double completion, or descriptor leaks.
Fix this by completing d instead of found in the final
list_for_each_entry_safe() loop. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: use expect->helper
Use expect->helper in ctnetlink and /proc to dump the helper name.
Using nfct_help() without holding a reference to the master conntrack
is unsafe.
Use exp->master->helper in ctnetlink path if userspace does not provide
an explicit helper when creating an expectation to retain the existing
behaviour. The ctnetlink expectation path holds the reference on the
master conntrack and nf_conntrack_expect lock and the nfnetlink glue
path refers to the master ct that is attached to the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock()
Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1].
smc_tcp_syn_recv_sock() is called in the TCP receive path
(softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP
listening socket). It reads sk_user_data to get the smc_sock
pointer. However, when the SMC listen socket is being closed
concurrently, smc_close_active() sets clcsock->sk_user_data
to NULL under sk_callback_lock, and then the smc_sock itself
can be freed via sock_put() in smc_release().
This leads to two issues:
1) NULL pointer dereference: sk_user_data is NULL when
accessed.
2) Use-after-free: sk_user_data is read as non-NULL, but the
smc_sock is freed before its fields (e.g., queued_smc_hs,
ori_af_ops) are accessed.
The race window looks like this (the syzkaller crash [1]
triggers via the SYN cookie path: tcp_get_cookie_sock() ->
smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path
has the same race):
CPU A (softirq) CPU B (process ctx)
tcp_v4_rcv()
TCP_NEW_SYN_RECV:
sk = req->rsk_listener
sock_hold(sk)
/* No lock on listener */
smc_close_active():
write_lock_bh(cb_lock)
sk_user_data = NULL
write_unlock_bh(cb_lock)
...
smc_clcsock_release()
sock_put(smc->sk) x2
-> smc_sock freed!
tcp_check_req()
smc_tcp_syn_recv_sock():
smc = user_data(sk)
-> NULL or dangling
smc->queued_smc_hs
-> crash!
Note that the clcsock and smc_sock are two independent objects
with separate refcounts. TCP stack holds a reference on the
clcsock, which keeps it alive, but this does NOT prevent the
smc_sock from being freed.
Fix this by using RCU and refcount_inc_not_zero() to safely
access smc_sock. Since smc_tcp_syn_recv_sock() is called in
the TCP three-way handshake path, taking read_lock_bh on
sk_callback_lock is too heavy and would not survive a SYN
flood attack. Using rcu_read_lock() is much more lightweight.
- Set SOCK_RCU_FREE on the SMC listen socket so that
smc_sock freeing is deferred until after the RCU grace
period. This guarantees the memory is still valid when
accessed inside rcu_read_lock().
- Use rcu_read_lock() to protect reading sk_user_data.
- Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the
smc_sock. If the refcount has already reached zero (close
path completed), it returns false and we bail out safely.
Note: smc_hs_congested() has a similar lockless read of
sk_user_data without rcu_read_lock(), but it only checks for
NULL and accesses the global smc_hs_wq, never dereferencing
any smc_sock field, so it is not affected.
Reproducer was verified with mdelay injection and smc_run,
the issue no longer occurs with this patch applied.
[1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix PTP NULL pointer dereference during VSI rebuild
Fix race condition where PTP periodic work runs while VSI is being
rebuilt, accessing NULL vsi->rx_rings.
The sequence was:
1. ice_ptp_prepare_for_reset() cancels PTP work
2. ice_ptp_rebuild() immediately queues PTP work
3. VSI rebuild happens AFTER ice_ptp_rebuild()
4. PTP work runs and accesses NULL vsi->rx_rings
Fix: Keep PTP work cancelled during rebuild, only queue it after
VSI rebuild completes in ice_rebuild().
Added ice_ptp_queue_work() helper function to encapsulate the logic
for queuing PTP work, ensuring it's only queued when PTP is supported
and the state is ICE_PTP_READY.
Error log:
[ 121.392544] ice 0000:60:00.1: PTP reset successful
[ 121.392692] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 121.392712] #PF: supervisor read access in kernel mode
[ 121.392720] #PF: error_code(0x0000) - not-present page
[ 121.392727] PGD 0
[ 121.392734] Oops: Oops: 0000 [#1] SMP NOPTI
[ 121.392746] CPU: 8 UID: 0 PID: 1005 Comm: ice-ptp-0000:60 Tainted: G S 6.19.0-rc6+ #4 PREEMPT(voluntary)
[ 121.392761] Tainted: [S]=CPU_OUT_OF_SPEC
[ 121.392773] RIP: 0010:ice_ptp_update_cached_phctime+0xbf/0x150 [ice]
[ 121.393042] Call Trace:
[ 121.393047] <TASK>
[ 121.393055] ice_ptp_periodic_work+0x69/0x180 [ice]
[ 121.393202] kthread_worker_fn+0xa2/0x260
[ 121.393216] ? __pfx_ice_ptp_periodic_work+0x10/0x10 [ice]
[ 121.393359] ? __pfx_kthread_worker_fn+0x10/0x10
[ 121.393371] kthread+0x10d/0x230
[ 121.393382] ? __pfx_kthread+0x10/0x10
[ 121.393393] ret_from_fork+0x273/0x2b0
[ 121.393407] ? __pfx_kthread+0x10/0x10
[ 121.393417] ret_from_fork_asm+0x1a/0x30
[ 121.393432] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't clobber irqfd routing type when deassigning irqfd
When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's
routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86
and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to
handle a concurrent routing update, verify that the irqfd is still active
before consuming the routing information. As evidenced by the x86 and
arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below),
clobbering the entry type without notifying arch code is surprising and
error prone.
As a bonus, checking that the irqfd is active provides a convenient
location for documenting _why_ KVM must not consume the routing entry for
an irqfd that is in the process of being deassigned: once the irqfd is
deleted from the list (which happens *before* the eventfd is detached), it
will no longer receive updates via kvm_irq_routing_update(), and so KVM
could deliver an event using stale routing information (relative to
KVM_SET_GSI_ROUTING returning to userspace).
As an even better bonus, explicitly checking for the irqfd being active
fixes a similar bug to the one the clobbering is trying to prevent: if an
irqfd is deactivated, and then its routing is changed,
kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing()
(because the irqfd isn't in the list). And so if the irqfd is in bypass
mode, IRQs will continue to be posted using the old routing information.
As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type
results in KVM incorrectly keeping the IRQ in bypass mode, which is
especially problematic on AMD as KVM tracks IRQs that are being posted to
a vCPU in a list whose lifetime is tied to the irqfd.
Without the help of KASAN to detect use-after-free, the most common
sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to
the memory for irqfd structure being re-allocated and zeroed, resulting
in irqfd->irq_bypass_data being NULL when read by
avic_update_iommu_vcpu_affinity():
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:amd_iommu_update_ga+0x19/0xe0
Call Trace:
<TASK>
avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd]
__avic_vcpu_load+0xf4/0x130 [kvm_amd]
kvm_arch_vcpu_load+0x89/0x210 [kvm]
vcpu_load+0x30/0x40 [kvm]
kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm]
kvm_vcpu_ioctl+0x571/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46893b
</TASK>
---[ end trace 0000000000000000 ]---
If AVIC is inhibited when the irfd is deassigned, the bug will manifest as
list corruption, e.g. on the next irqfd assignment.
list_add corruption. next->prev should be prev (ffff8d474d5cd588),
but was 0000000000000000. (next=ffff8d8658f86530).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:__list_add_valid_or_report+0x97/0xc0
Call Trace:
<TASK>
avic_pi_update_irte+0x28e/0x2b0 [kvm_amd]
kvm_pi_update_irte+0xbf/0x190 [kvm]
kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm]
irq_bypass_register_consumer+0xcd/0x170 [irqbypa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix race in nvmet_bio_done() leading to NULL pointer dereference
There is a race condition in nvmet_bio_done() that can cause a NULL
pointer dereference in blk_cgroup_bio_start():
1. nvmet_bio_done() is called when a bio completes
2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req)
3. The queue_response callback can re-queue and re-submit the same request
4. The re-submission reuses the same inline_bio from nvmet_req
5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete)
invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL
6. The re-submitted bio enters submit_bio_noacct_nocheck()
7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
RIP: 0010:blk_cgroup_bio_start+0x10/0xd0
Call Trace:
submit_bio_noacct_nocheck+0x44/0x250
nvmet_bdev_execute_rw+0x254/0x370 [nvmet]
process_one_work+0x193/0x3c0
worker_thread+0x281/0x3a0
Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put()
BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before
the request can be re-submitted, preventing the race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work
hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling
hci_uart_register_dev(), which calls proto->open() to initialize
hu->priv. However, if a TTY write wakeup occurs during this window,
hci_uart_tx_wakeup() may schedule write_work before hu->priv is
initialized, leading to a NULL pointer dereference in
hci_uart_write_work() when proto->dequeue() accesses hu->priv.
The race condition is:
CPU0 CPU1
---- ----
hci_uart_set_proto()
set_bit(HCI_UART_PROTO_INIT)
hci_uart_register_dev()
tty write wakeup
hci_uart_tty_wakeup()
hci_uart_tx_wakeup()
schedule_work(&hu->write_work)
proto->open(hu)
// initializes hu->priv
hci_uart_write_work()
hci_uart_dequeue()
proto->dequeue(hu)
// accesses hu->priv (NULL!)
Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open()
succeeds, ensuring hu->priv is initialized before any work can be
scheduled. |
