| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "riscv: Define TASK_SIZE_MAX for __access_ok()"
This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: nfsd4_spo_must_allow() must check this is a v4 compound request
If the request being processed is not a v4 compound request, then
examining the cstate can have undefined results.
This patch adds a check that the rpc procedure being executed
(rq_procinfo) is the NFSPROC4_COMPOUND procedure. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix sample vs do_exit()
Baisheng Gao reported an ARM64 crash, which Mark decoded as being a
synchronous external abort -- most likely due to trying to access
MMIO in bad ways.
The crash further shows perf trying to do a user stack sample while in
exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address
space it is trying to access.
It turns out that we stop perf after we tear down the userspace mm; a
receipie for disaster, since perf likes to access userspace for
various reasons.
Flip this order by moving up where we stop perf in do_exit().
Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER
to abort when the current task does not have an mm (exit_mm() makes
sure to set current->mm = NULL; before commencing with the actual
teardown). Such that CPU wide events don't trip on this same problem. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: xsk: rx: fix the frame's length check
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix warning when reconnecting channel
When reconnecting a channel in smb2_reconnect_server(), a dummy tcon
is passed down to smb2_reconnect() with ->query_interface
uninitialized, so we can't call queue_delayed_work() on it.
Fix the following warning by ensuring that we're queueing the delayed
worker from correct tcon.
WARNING: CPU: 4 PID: 1126 at kernel/workqueue.c:2498 __queue_delayed_work+0x1d2/0x200
Modules linked in: cifs cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 4 UID: 0 PID: 1126 Comm: kworker/4:0 Not tainted 6.16.0-rc3 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-4.fc42 04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__queue_delayed_work+0x1d2/0x200
Code: 41 5e 41 5f e9 7f ee ff ff 90 0f 0b 90 e9 5d ff ff ff bf 02 00
00 00 e8 6c f3 07 00 89 c3 eb bd 90 0f 0b 90 e9 57 f> 0b 90 e9 65 fe
ff ff 90 0f 0b 90 e9 72 fe ff ff 90 0f 0b 90 e9
RSP: 0018:ffffc900014afad8 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff888124d99988 RCX: ffffffff81399cc1
RDX: dffffc0000000000 RSI: ffff888114326e00 RDI: ffff888124d999f0
RBP: 000000000000ea60 R08: 0000000000000001 R09: ffffed10249b3331
R10: ffff888124d9998f R11: 0000000000000004 R12: 0000000000000040
R13: ffff888114326e00 R14: ffff888124d999d8 R15: ffff888114939020
FS: 0000000000000000(0000) GS:ffff88829f7fe000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe7a2b4038 CR3: 0000000120a6f000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
queue_delayed_work_on+0xb4/0xc0
smb2_reconnect+0xb22/0xf50 [cifs]
smb2_reconnect_server+0x413/0xd40 [cifs]
? __pfx_smb2_reconnect_server+0x10/0x10 [cifs]
? local_clock_noinstr+0xd/0xd0
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
process_one_work+0x4c5/0xa10
? __pfx_process_one_work+0x10/0x10
? __list_add_valid_or_report+0x37/0x120
worker_thread+0x2f1/0x5a0
? __kthread_parkme+0xde/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1fe/0x380
? kthread+0x10f/0x380
? __pfx_kthread+0x10/0x10
? local_clock_noinstr+0xd/0xd0
? ret_from_fork+0x1b/0x1f0
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
? rcu_is_watching+0x20/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork+0x15b/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 1116206
hardirqs last enabled at (1116205): [<ffffffff8143af42>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1116206): [<ffffffff81399f0e>] queue_delayed_work_on+0x6e/0xc0
softirqs last enabled at (1116138): [<ffffffffc04562fd>] __smb_send_rqst+0x42d/0x950 [cifs]
softirqs last disabled at (1116136): [<ffffffff823d35e1>] release_sock+0x21/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: drop fragments with multicast or broadcast RA
IEEE 802.11 fragmentation can only be applied to unicast frames.
Therefore, drop fragments with multicast or broadcast RA. This patch
addresses vulnerabilities such as CVE-2020-26145. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/bpf: fix JIT code size calculation of bpf trampoline
arch_bpf_trampoline_size() provides JIT size of the BPF trampoline
before the buffer for JIT'ing it is allocated. The total number of
instructions emitted for BPF trampoline JIT code depends on where
the final image is located. So, the size arrived at with the dummy
pass in arch_bpf_trampoline_size() can vary from the actual size
needed in arch_prepare_bpf_trampoline(). When the instructions
accounted in arch_bpf_trampoline_size() is less than the number of
instructions emitted during the actual JIT compile of the trampoline,
the below warning is produced:
WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc
which is:
/* Make sure the trampoline generation logic doesn't overflow */
if (image && WARN_ON_ONCE(&image[ctx->idx] >
(u32 *)rw_image_end - BPF_INSN_SAFETY)) {
So, during the dummy pass, instead of providing some arbitrary image
location, account for maximum possible instructions if and when there
is a dependency with image location for JIT'ing. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to bail out in get_new_segment()
------------[ cut here ]------------
WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc
pc : new_curseg+0x5e8/0x6dc
Call trace:
new_curseg+0x5e8/0x6dc
f2fs_allocate_data_block+0xa54/0xe28
do_write_page+0x6c/0x194
f2fs_do_write_node_page+0x38/0x78
__write_node_page+0x248/0x6d4
f2fs_sync_node_pages+0x524/0x72c
f2fs_write_checkpoint+0x4bc/0x9b0
__checkpoint_and_complete_reqs+0x80/0x244
issue_checkpoint_thread+0x8c/0xec
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
get_new_segment() detects inconsistent status in between free_segmap
and free_secmap, let's record such error into super block, and bail
out get_new_segment() instead of continue using the segment. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Use TOE/TSO on all TCP
It is desireable to push the hardware accelerator to also
process non-segmented TCP frames: we pass the skb->len
to the "TOE/TSO" offloader and it will handle them.
Without this quirk the driver becomes unstable and lock
up and and crash.
I do not know exactly why, but it is probably due to the
TOE (TCP offload engine) feature that is coupled with the
segmentation feature - it is not possible to turn one
part off and not the other, either both TOE and TSO are
active, or neither of them.
Not having the TOE part active seems detrimental, as if
that hardware feature is not really supposed to be turned
off.
The datasheet says:
"Based on packet parsing and TCP connection/NAT table
lookup results, the NetEngine puts the packets
belonging to the same TCP connection to the same queue
for the software to process. The NetEngine puts
incoming packets to the buffer or series of buffers
for a jumbo packet. With this hardware acceleration,
IP/TCP header parsing, checksum validation and
connection lookup are offloaded from the software
processing."
After numerous tests with the hardware locking up after
something between minutes and hours depending on load
using iperf3 I have concluded this is necessary to stabilize
the hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add free_transport ops in ksmbd connection
free_transport function for tcp connection can be called from smbdirect.
It will cause kernel oops. This patch add free_transport ops in ksmbd
connection, and add each free_transports for tcp and smbdirect. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Log an error when close_all_cached_dirs fails
Under low-memory conditions, close_all_cached_dirs() can't move the
dentries to a separate list to dput() them once the locks are dropped.
This will result in a "Dentry still in use" error, so add an error
message that makes it clear this is what happened:
[ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries
[ 495.281595] ------------[ cut here ]------------
[ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs]
[ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0
Also, bail out of looping through all tcons as soon as a single
allocation fails, since we're already in trouble, and kmalloc() attempts
for subseqeuent tcons are likely to fail just like the first one did. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-pci: Fix result size returned for the admin command completion
The result size returned by virtio_pci_admin_dev_parts_get() is 8 bytes
larger than the actual result data size. This occurs because the
result_sg_size field of the command is filled with the result length
from virtqueue_get_buf(), which includes both the data size and an
additional 8 bytes of status.
This oversized result size causes two issues:
1. The state transferred to the destination includes 8 bytes of extra
data at the end.
2. The allocated buffer in the kernel may be smaller than the returned
size, leading to failures when reading beyond the allocated size.
The commit fixes this by subtracting the status size from the result of
virtqueue_get_buf().
This fix has been tested through live migrations with virtio-net,
virtio-net-transitional, and virtio-blk devices. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Call trace:
__list_del_entry_valid_or_report+0xb8/0xd0
ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k]
drv_remove_interface+0x48/0x194 [mac80211]
ieee80211_do_stop+0x6e0/0x844 [mac80211]
ieee80211_stop+0x44/0x17c [mac80211]
__dev_close_many+0xac/0x150
__dev_change_flags+0x194/0x234
dev_change_flags+0x24/0x6c
devinet_ioctl+0x3a0/0x670
inet_ioctl+0x200/0x248
sock_do_ioctl+0x60/0x118
sock_ioctl+0x274/0x35c
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x114
...
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/cm: Drop lockdep assert and WARN when freeing old msg
The send completion handler can run after cm_id has advanced to another
message. The cm_id lock is not needed in this case, but a recent change
re-used cm_free_priv_msg(), which asserts that the lock is held and
WARNs if the cm_id's currently outstanding msg is different than the one
being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hisi_acc_vfio_pci: bugfix live migration function without VF device driver
If the VF device driver is not loaded in the Guest OS and we attempt to
perform device data migration, the address of the migrated data will
be NULL.
The live migration recovery operation on the destination side will
access a null address value, which will cause access errors.
Therefore, live migration of VMs without added VF device drivers
does not require device data migration.
In addition, when the queue address data obtained by the destination
is empty, device queue recovery processing will not be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix crash in wacom_aes_battery_handler()
Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended
inactivity") introduced wacom_aes_battery_handler() which is scheduled
as a delayed work (aes_battery_work).
In wacom_remove(), aes_battery_work is not canceled. Consequently, if
the device is removed while aes_battery_work is still pending, then hard
crashes or "Oops: general protection fault..." are experienced when
wacom_aes_battery_handler() is finally called. E.g., this happens with
built-in USB devices after resume from hibernate when aes_battery_work
was still pending at the time of hibernation.
So, take care to cancel aes_battery_work in wacom_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix CPER handler device confusion
By inspection, cxl_cper_handle_prot_err() is making a series of fragile
assumptions that can lead to crashes:
1/ It assumes that endpoints identified in the record are a CXL-type-3
device, nothing guarantees that.
2/ It assumes that the device is bound to the cxl_pci driver, nothing
guarantees that.
3/ Minor, it holds the device lock over the switch-port tracing for no
reason as the trace is 100% generated from data in the record.
Correct those by checking that the PCIe endpoint parents a cxl_memdev
before assuming the format of the driver data, and move the lock to where
it is required. Consequently this also makes the implementation ready for
CXL accelerators that are not bound to cxl_pci. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: properly flush XDP redirect lists
We encountered following crash when testing a XDP_REDIRECT feature
in production:
[56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd
40f30).
[56251.601413] ------------[ cut here ]------------
[56251.611357] kernel BUG at lib/list_debug.c:29!
[56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6.
3 #1
[56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE
[56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025
[56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0
[56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48
89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89
[56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246
[56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000
[56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80
[56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18
[56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000
[56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40
[56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000
[56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0
[56251.831365] PKRU: 55555554
[56251.838653] Call Trace:
[56251.845560] <IRQ>
[56251.851943] cpu_map_enqueue.cold+0x5/0xa
[56251.860243] xdp_do_redirect+0x2d9/0x480
[56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en]
[56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en]
[56251.885665] ? cpu_max_write+0x1e/0x100
[56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en]
[56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en]
[56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.944250] __napi_poll+0x2b/0x160
[56251.951155] bpf_trampoline_6442548651+0x79/0x123
[56251.959262] __napi_poll+0x5/0x160
[56251.966037] net_rx_action+0x3d2/0x880
[56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.989262] ? __hrtimer_run_queues+0x162/0x2a0
[56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en]
[56252.019903] handle_softirqs+0xcf/0x270
[56252.026650] irq_exit_rcu+0x67/0x90
[56252.032933] common_interrupt+0x85/0xa0
[56252.039498] </IRQ>
[56252.044246] <TASK>
[56252.048935] asm_common_interrupt+0x26/0x40
[56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420
[56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae
01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29
[56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202
[56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000
[56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000
[56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e
[56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860
[56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000
[56252.146667] ? cpuidle_enter_state+0xab/0x420
[56252.153909] cpuidle_enter+0x2d/0x40
[56252.160360] do_idle+0x176/0x1c0
[56252.166456
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to
send ABTS for each of them. On send completion, this causes an attempt to
free the same frame twice that leads to a crash.
Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS
logic accordingly.
Tested by checking MDS for FDMI information.
Tested by using instrumented driver to:
- Drop PLOGI response
- Drop RHBA response
- Drop RPA response
- Drop RHBA and RPA response
- Drop PLOGI response + ABTS response
- Drop RHBA response + ABTS response
- Drop RPA response + ABTS response
- Drop RHBA and RPA response + ABTS response for both of them |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: validate AG parameters in dbMount() to prevent crashes
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:
- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
(L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
ensures agperlev >= 1.
- Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
- LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
stree (size 1365).
- Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9
shift exponent -335544310 is negative
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400
dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613
jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105
jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
