Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417557 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38692 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exfat: add cluster chain loop check for dir An infinite loop may occur if the following conditions occur due to file system corruption. (1) Condition for exfat_count_dir_entries() to loop infinitely. - The cluster chain includes a loop. - There is no UNUSED entry in the cluster chain. (2) Condition for exfat_create_upcase_table() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and up-case table entry in the cluster chain of the root directory. (3) Condition for exfat_load_bitmap() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and bitmap entry in the cluster chain of the root directory. (4) Condition for exfat_find_dir_entry() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. (5) Condition for exfat_check_dir_empty() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. - All files and sub-directories under the directory are deleted. This commit adds checks to break the above infinite loop. | ||||
| CVE-2025-38636 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200 trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0 This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g. the next automaton's data in this case). The error is harmless as, while printing the string, we stop at the null terminator, but it should still be fixed. Use the __string facilities while defining the tracepoints to avoid reading out of bound memory. | ||||
| CVE-2025-38632 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned. | ||||
| CVE-2025-38615 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: cancle set bad inode after removing name fails The reproducer uses a file0 on a ntfs3 file system with a corrupted i_link. When renaming, the file0's inode is marked as a bad inode because the file name cannot be deleted. The underlying bug is that make_bad_inode() is called on a live inode. In some cases it's "icache lookup finds a normal inode, d_splice_alias() is called to attach it to dentry, while another thread decides to call make_bad_inode() on it - that would evict it from icache, but we'd already found it there earlier". In some it's outright "we have an inode attached to dentry - that's how we got it in the first place; let's call make_bad_inode() on it just for shits and giggles". | ||||
| CVE-2025-38597 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: vop2: fail cleanly if missing a primary plane for a video-port Each window of a vop2 is usable by a specific set of video ports, so while binding the vop2, we look through the list of available windows trying to find one designated as primary-plane and usable by that specific port. The code later wants to use drm_crtc_init_with_planes with that found primary plane, but nothing has checked so far if a primary plane was actually found. For whatever reason, the rk3576 vp2 does not have a usable primary window (if vp0 is also in use) which brought the issue to light and ended in a null-pointer dereference further down. As we expect a primary-plane to exist for a video-port, add a check at the end of the window-iteration and fail probing if none was found. | ||||
| CVE-2025-38595 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen: fix UAF in dmabuf_exp_from_pages() [dma_buf_fd() fixes; no preferences regarding the tree it goes through - up to xen folks] As soon as we'd inserted a file reference into descriptor table, another thread could close it. That's fine for the case when all we are doing is returning that descriptor to userland (it's a race, but it's a userland race and there's nothing the kernel can do about it). However, if we follow fd_install() with any kind of access to objects that would be destroyed on close (be it the struct file itself or anything destroyed by its ->release()), we have a UAF. dma_buf_fd() is a combination of reserving a descriptor and fd_install(). gntdev dmabuf_exp_from_pages() calls it and then proceeds to access the objects destroyed on close - starting with gntdev_dmabuf itself. Fix that by doing reserving descriptor before anything else and do fd_install() only when everything had been set up. | ||||
| CVE-2025-38590 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Remove skb secpath if xfrm state is not found Hardware returns a unique identifier for a decrypted packet's xfrm state, this state is looked up in an xarray. However, the state might have been freed by the time of this lookup. Currently, if the state is not found, only a counter is incremented. The secpath (sp) extension on the skb is not removed, resulting in sp->len becoming 0. Subsequently, functions like __xfrm_policy_check() attempt to access fields such as xfrm_input_state(skb)->xso.type (which dereferences sp->xvec[sp->len - 1]) without first validating sp->len. This leads to a crash when dereferencing an invalid state pointer. This patch prevents the crash by explicitly removing the secpath extension from the skb if the xfrm state is not found after hardware decryption. This ensures downstream functions do not operate on a zero-length secpath. BUG: unable to handle page fault for address: ffffffff000002c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 282e067 P4D 282e067 PUD 0 Oops: Oops: 0000 [#1] SMP CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__xfrm_policy_check+0x61a/0xa30 Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa RSP: 0018:ffff88885fb04918 EFLAGS: 00010297 RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353 R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8 R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00 FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? try_to_wake_up+0x108/0x4c0 ? udp4_lib_lookup2+0xbe/0x150 ? udp_lib_lport_inuse+0x100/0x100 ? __udp4_lib_lookup+0x2b0/0x410 __xfrm_policy_check2.constprop.0+0x11e/0x130 udp_queue_rcv_one_skb+0x1d/0x530 udp_unicast_rcv_skb+0x76/0x90 __udp4_lib_rcv+0xa64/0xe90 ip_protocol_deliver_rcu+0x20/0x130 ip_local_deliver_finish+0x75/0xa0 ip_local_deliver+0xc1/0xd0 ? ip_protocol_deliver_rcu+0x130/0x130 ip_sublist_rcv+0x1f9/0x240 ? ip_rcv_finish_core+0x430/0x430 ip_list_rcv+0xfc/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x200/0x360 ? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core] gro_receive_skb+0xfd/0x210 mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core] mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core] ? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core] mlx5e_napi_poll+0x114/0xab0 [mlx5_core] __napi_poll+0x25/0x170 net_rx_action+0x32d/0x3a0 ? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core] ? notifier_call_chain+0x33/0xa0 handle_softirqs+0xda/0x250 irq_exit_rcu+0x6d/0xc0 common_interrupt+0x81/0xa0 </IRQ> | ||||
| CVE-2025-38582 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix double destruction of rsv_qp rsv_qp may be double destroyed in error flow, first in free_mr_init(), and then in hns_roce_exit(). Fix it by moving the free_mr_init() call into hns_roce_v2_init(). list_del corruption, ffff589732eb9b50->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 8 PID: 1047115 at lib/list_debug.c:53 __list_del_entry_valid+0x148/0x240 ... Call trace: __list_del_entry_valid+0x148/0x240 hns_roce_qp_remove+0x4c/0x3f0 [hns_roce_hw_v2] hns_roce_v2_destroy_qp_common+0x1dc/0x5f4 [hns_roce_hw_v2] hns_roce_v2_destroy_qp+0x22c/0x46c [hns_roce_hw_v2] free_mr_exit+0x6c/0x120 [hns_roce_hw_v2] hns_roce_v2_exit+0x170/0x200 [hns_roce_hw_v2] hns_roce_exit+0x118/0x350 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x1c8/0x304 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify_init+0x170/0x21c [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0x6c/0x190 [hns_roce_hw_v2] hclge_notify_roce_client+0x6c/0x160 [hclge] hclge_reset_rebuild+0x150/0x5c0 [hclge] hclge_reset+0x10c/0x140 [hclge] hclge_reset_subtask+0x80/0x104 [hclge] hclge_reset_service_task+0x168/0x3ac [hclge] hclge_service_task+0x50/0x100 [hclge] process_one_work+0x250/0x9a0 worker_thread+0x324/0x990 kthread+0x190/0x210 ret_from_fork+0x10/0x18 | ||||
| CVE-2025-38544 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix bug due to prealloc collision When userspace is using AF_RXRPC to provide a server, it has to preallocate incoming calls and assign to them call IDs that will be used to thread related recvmsg() and sendmsg() together. The preallocated call IDs will automatically be attached to calls as they come in until the pool is empty. To the kernel, the call IDs are just arbitrary numbers, but userspace can use the call ID to hold a pointer to prepared structs. In any case, the user isn't permitted to create two calls with the same call ID (call IDs become available again when the call ends) and EBADSLT should result from sendmsg() if an attempt is made to preallocate a call with an in-use call ID. However, the cleanup in the error handling will trigger both assertions in rxrpc_cleanup_call() because the call isn't marked complete and isn't marked as having been released. Fix this by setting the call state in rxrpc_service_prealloc_one() and then marking it as being released before calling the cleanup function. | ||||
| CVE-2025-38531 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: common: st_sensors: Fix use of uninitialize device structs Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1] | ||||
| CVE-2025-38507 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: avoid bluetooth suspend/resume stalls Ensure we don't stall or panic the kernel when using bluetooth-connected controllers. This was reported as an issue on android devices using kernel 6.6 due to the resume hook which had been added for usb joycons. First, set a new state value to JOYCON_CTLR_STATE_SUSPENDED in a newly-added nintendo_hid_suspend. This makes sure we will not stall out the kernel waiting for input reports during led classdev suspend. The stalls could happen if connectivity is unreliable or lost to the controller prior to suspend. Second, since we lose connectivity during suspend, do not try joycon_init() for bluetooth controllers in the nintendo_hid_resume path. Tested via multiple suspend/resume flows when using the controller both in USB and bluetooth modes. | ||||
| CVE-2025-38429 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Update read pointer only after buffer is written Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated before the buffer is written, potentially causing race conditions where the host sees an updated read pointer before the buffer is actually written. Updating rd_offset prematurely can lead to the host accessing an uninitialized or incomplete element, resulting in data corruption. Invoke the buffer write before updating rd_offset to ensure the element is fully written before signaling its availability. | ||||
| CVE-2025-38359 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix in_atomic() handling in do_secure_storage_access() Kernel user spaces accesses to not exported pages in atomic context incorrectly try to resolve the page fault. With debug options enabled call traces like this can be seen: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. Preemption disabled at: [<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0 CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39 Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPT Tainted: [W]=WARN Hardware name: IBM 3931 A01 703 (LPAR) Call Trace: [<00000383e990d282>] dump_stack_lvl+0xa2/0xe8 [<00000383e99bf152>] __might_resched+0x292/0x2d0 [<00000383eaa7c374>] down_read+0x34/0x2d0 [<00000383e99432f8>] do_secure_storage_access+0x108/0x360 [<00000383eaa724b0>] __do_pgm_check+0x130/0x220 [<00000383eaa842e4>] pgm_check_handler+0x114/0x160 [<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0 ([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0) [<00000383e9c45eae>] generic_perform_write+0x16e/0x310 [<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160 [<00000383e9da0de4>] vfs_write+0x1c4/0x460 [<00000383e9da123c>] ksys_write+0x7c/0x100 [<00000383eaa7284e>] __do_syscall+0x15e/0x280 [<00000383eaa8417e>] system_call+0x6e/0x90 INFO: lockdep is turned off. It is not allowed to take the mmap_lock while in atomic context. Therefore handle such a secure storage access fault as if the accessed page is not mapped: the uaccess function will return -EFAULT, and the caller has to deal with this. Usually this means that the access is retried in process context, which allows to resolve the page fault (or in this case export the page). | ||||
| CVE-2025-38283 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: bugfix live migration function without VF device driver If the VF device driver is not loaded in the Guest OS and we attempt to perform device data migration, the address of the migrated data will be NULL. The live migration recovery operation on the destination side will access a null address value, which will cause access errors. Therefore, live migration of VMs without added VF device drivers does not require device data migration. In addition, when the queue address data obtained by the destination is empty, device queue recovery processing will not be performed. | ||||
| CVE-2025-38272 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: b53: do not enable EEE on bcm63xx BCM63xx internal switches do not support EEE, but provide multiple RGMII ports where external PHYs may be connected. If one of these PHYs are EEE capable, we may try to enable EEE for the MACs, which then hangs the system on access of the (non-existent) EEE registers. Fix this by checking if the switch actually supports EEE before attempting to configure it. | ||||
| CVE-2025-38261 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM. | ||||
| CVE-2025-38248 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack ---truncated--- | ||||
| CVE-2025-38204 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error. | ||||
| CVE-2025-38195 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset() ERROR INFO: CPU 25 Unable to handle kernel paging request at virtual address 0x0 ... Call Trace: [<900000000023c30c>] huge_pte_offset+0x3c/0x58 [<900000000057fd4c>] hugetlb_follow_page_mask+0x74/0x438 [<900000000051fee8>] __get_user_pages+0xe0/0x4c8 [<9000000000522414>] faultin_page_range+0x84/0x380 [<9000000000564e8c>] madvise_vma_behavior+0x534/0xa48 [<900000000056689c>] do_madvise+0x1bc/0x3e8 [<9000000000566df4>] sys_madvise+0x24/0x38 [<90000000015b9e88>] do_syscall+0x78/0x98 [<9000000000221f18>] handle_syscall+0xb8/0x158 In some cases, pmd may be NULL and rely on NULL as the return value for processing, so it is necessary to determine this situation here. | ||||
| CVE-2025-38182 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: santizize the arguments from userspace when adding a device Sanity check the values for queue depth and number of queues we get from userspace when adding a device. | ||||