| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix held lock freed on hfsplus_fill_super()
hfsplus_fill_super() calls hfs_find_init() to initialize a search
structure, which acquires tree->tree_lock. If the subsequent call to
hfsplus_cat_build_key() fails, the function jumps to the out_put_root
error label without releasing the lock. The later cleanup path then
frees the tree data structure with the lock still held, triggering a
held lock freed warning.
Fix this by adding the missing hfs_find_exit(&fd) call before jumping
to the out_put_root error label. This ensures that tree->tree_lock is
properly released on the error path.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is specifically
designed to detect memory management issues. It is currently under active
development and not yet publicly available.
We confirmed the bug by runtime testing under QEMU with x86_64 defconfig,
lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we
used GDB to dynamically shrink the max_unistr_len parameter to 1 before
hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally
return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and
exercises the faulty error path. The following warning was observed
during mount:
=========================
WARNING: held lock freed!
7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted
-------------------------
mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there!
ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
2 locks held by mount/174:
#0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40
#1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
stack backtrace:
CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
debug_check_no_locks_freed+0x13a/0x180
kfree+0x16b/0x510
? hfsplus_fill_super+0xcb4/0x18a0
hfsplus_fill_super+0xcb4/0x18a0
? __pfx_hfsplus_fill_super+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x65f/0xc30
? srso_return_thunk+0x5/0x5f
? pointer+0x4ce/0xbf0
? trace_contention_end+0x11c/0x150
? __pfx_pointer+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x79b/0xc30
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? vsnprintf+0x6da/0x1270
? srso_return_thunk+0x5/0x5f
? __mutex_unlock_slowpath+0x157/0x740
? __pfx_vsnprintf+0x10/0x10
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? mark_held_locks+0x49/0x80
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? irqentry_exit+0x17b/0x5e0
? trace_irq_disable.constprop.0+0x116/0x150
? __pfx_hfsplus_fill_super+0x10/0x10
? __pfx_hfsplus_fill_super+0x10/0x10
get_tree_bdev_flags+0x302/0x580
? __pfx_get_tree_bdev_flags+0x10/0x10
? vfs_parse_fs_qstr+0x129/0x1a0
? __pfx_vfs_parse_fs_qstr+0x3/0x10
vfs_get_tree+0x89/0x320
fc_mount+0x10/0x1d0
path_mount+0x5c5/0x21c0
? __pfx_path_mount+0x10/0x10
? trace_irq_enable.constprop.0+0x116/0x150
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x307/0x540
? user_path_at+0x51/0x60
? __x64_sys_mount+0x212/0x280
? srso_return_thunk+0x5/0x5f
__x64_sys_mount+0x212/0x280
? __pfx___x64_sys_mount+0x10/0x10
? srso_return_thunk+0x5/0x5f
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
do_syscall_64+0x111/0x680
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ffacad55eae
Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8
RSP: 002b
---truncated--- |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To create and manage guests, domctl operations are used by the control
domain, a possible Xenstore domain, or by a domain controlling a
particular guest. Some of these operations may not be executed in
parallel, so a system-wide lock is used. The way that lock is acquired
is, however, not providing any fairness. This is CVE-2026-42489.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking. This is
CVE-2026-42490. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To create and manage guests, domctl operations are used by the control
domain, a possible Xenstore domain, or by a domain controlling a
particular guest. Some of these operations may not be executed in
parallel, so a system-wide lock is used. The way that lock is acquired
is, however, not providing any fairness. This is CVE-2026-42489.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking. This is
CVE-2026-42490. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Reinstate disabling of BHs around IRQ handler
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/shstk: Prevent deadlock during shstk sigreturn
During sigreturn the shadow stack signal frame is popped. The kernel does
this by reading the shadow stack using normal read accesses. When it can't
assume the memory is shadow stack, it takes extra steps to makes sure it is
reading actual shadow stack memory and not other normal readable memory. It
does this by holding the mmap read lock while doing the access and checking
the flags of the VMA.
Unfortunately that is not safe. If the read of the shadow stack sigframe
hits a page fault, the fault handler will try to recursively grab another
mmap read lock. This normally works ok, but if a writer on another CPU is
also waiting, the second read lock could fail and cause a deadlock.
Fix this by not holding mmap lock during the read access to userspace.
Instead use mmap_lock_speculate_...() to watch for changes between dropping
mmap lock and the userspace access. Retry if anything grabbed an mmap write
lock in between and could have changed the VMA.
These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only
available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK
depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP
kernels. So drop support for the other configs under the assumption that
the !SMP shadow stack user base does not exist.
Currently there is a check that skips the lookup work when the SSP can be
assumed to be on a shadow stack. While reorganizing the function, remove
the optimization to make the tricky code flows more common, such that
issues like this cannot escape detection for so long. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
Commit f76d4c28a46a ("fs/jbd2: use sleeping version of
__find_get_block()") changed jbd2_journal_cancel_revoke() to use
__find_get_block_nonatomic() which holds the folio lock instead of
i_private_lock. This breaks the lock ordering (folio -> buffer) and
causes an ABBA deadlock when the filesystem blocksize < pagesize:
T1 T2
ext4_mkdir()
ext4_init_new_dir()
ext4_append()
ext4_getblk()
lock_buffer() <- A
sync_blockdev()
blkdev_writepages()
writeback_iter()
writeback_get_folio()
folio_lock() <- B
ext4_journal_get_create_access()
jbd2_journal_cancel_revoke()
__find_get_block_nonatomic()
folio_lock() <- B
block_write_full_folio()
lock_buffer() <- A
This can occasionally cause generic/013 to hang.
Fix by only calling __find_get_block_nonatomic() when the passed
buffer_head doesn't belong to the bdev, which is the only case that we
need to look up its bdev alias. Otherwise, the lookup is redundant since
the found buffer_head is equal to the one we passed in. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated
A chain of commits going back to v7.0 reworked rmdir to satisfy the
controller invariant that a subsystem's ->css_offline() must not run while
tasks are still doing kernel-side work in the cgroup.
[1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
[2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup")
[3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir")
[4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition")
[5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context")
[1] moved task cset unlink from do_exit() to finish_task_switch() so a
task's cset link drops only after the task has fully stopped scheduling.
That made tasks past exit_signals() linger on cset->tasks until their final
context switch, which led to a series of problems as what userspace expected
to see after rmdir diverged from what the kernel needs to wait for. [2]-[5]
tried to bridge that divergence: [2] filtered the exiting tasks from
cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4]
fixed the wait's condition; [5] made nr_dying_subsys_* visible
synchronously.
The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the
rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g.
host PID 1 systemd reaping orphan pids that were re-parented to it during
the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those
pids to free, the pids can't free because PID 1 is the reaper and it's stuck
in rmdir, and the system A-A deadlocks. No internal lock ordering breaks
this; the wait itself is the bug.
The css killing side that drove the original reorder, however, can be made
cleanly asynchronous: ->css_offline() is already async, run from
css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to
make that chain start only after all tasks have left the cgroup. rmdir's
user-visible side then returns as soon as cgroup.procs and friends are
empty, while ->css_offline() still runs only after the cgroup is fully
drained.
Verified by the original reproducer (pidns teardown + zombie reaper, runs
under vng) which hangs vanilla and succeeds here, and by per-commit
deterministic repros for [2], [3], [4], [5] with a boot parameter that
widens the post-exit_signals() window so each state is reliably reachable.
Some stress tests on top of that.
cgroup_apply_control_disable() has the same shape of pre-existing race:
when a controller is disabled via subtree_control, kill_css() ran
synchronously while tasks past exit_signals() could still be linked to
the cgroup's csets, and ->css_offline() could fire before they drained.
This patch preserves the existing synchronous behavior at that call site
(kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch
will defer kill_css_finish() there using a per-css trigger.
This seems like the right approach and I don't see problems with it. The
changes are somewhat invasive but not excessively so, so backporting to
-stable should be okay. If something does turn out to be wrong, the fallback
is to revert the entire chain ([1]-[5]) and rework in the development branch
instead.
v2: Pin cgrp across the deferred destroy work with explicit
cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1
wasn't actually broken (ordered cgroup_offline_wq + queue_work order
in cgroup_task_dead() saved it) but the explicit ref removes the
dependency on those non-obvious invariants. Also note the
pre-existing cgroup_apply_control_disable() race in the description;
a follow-up will defer kill_css_finish() there. |
| NVIDIA Display Driver for Windows and Linux contains a vulnerability where an attacker could leak held driver locks. A successful exploit of this vulnerability might lead to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and
readl(crtc_reg) will access with random address, because the "device" is
from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong
when my platform inserts a discrete GPU:
lspci -tv
-[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller
...
+-06.0 Loongson Technology LLC LG100 GPU
+-06.2 Loongson Technology LLC Device 7a37
...
Add a default switch case to fix the panic as below:
Kernel ade access[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4
pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0
a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002
a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001
t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000
t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0
t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8
s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000
s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000
ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210
ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1)
BADV: 7fffffffffffff00
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007
0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff
900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08
0000000000000000 0000000000000000 0000000000000006 90000001002fb778
90000001000530b8 90000000027af000 0000000000000000 9000000100054000
9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001
90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000
0000000000000006 90000000027af000 0000000000000030 90000000027af000
900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560
7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030
...
Call Trace:
[<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210
[<9000000000eebc08>] pci_fixup_device+0x108/0x280
[<9000000000ebb70c>] pci_setup_device+0x24c/0x690
[<9000000000ebc560>] pci_scan_single_device+0xe0/0x140
[<9000000000ebc684>] pci_scan_slot+0xc4/0x280
[<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0
[<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420
[<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440
[<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0
[<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<9000000000f5211c>] acpi_bus_scan+0x6c/0x280
[<900000000189c028>] acpi_scan_init+0x194/0x310
[<900000000189bc6c>] acpi_init+0xcc/0x140
[<9000000000220cdc>] do_one_initcall+0x4c/0x310
[<90000000018618fc>] kernel_init_freeable+0x258/0x2d4
[<900000000184326c>] kernel_init+0x28/0x13c
[<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put()
This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein. |
| Improper Resource Locking vulnerability in Mitsubishi Electric MELSEC iQ-R Series R12CCPU-V firmware versions "16" and prior, Mitsubishi Electric MELSEC-Q Series Q03UDECPU the first 5 digits of serial No. "24061" and prior, Mitsubishi Electric MELSEC-Q Series Q04/06/10/13/20/26/50/100UDEHCPU the first 5 digits of serial No. "24061" and prior, Mitsubishi Electric MELSEC-Q Series Q03/04/06/13/26UDVCPU the first 5 digits of serial number "24051" and prior, Mitsubishi Electric MELSEC-Q Series Q04/06/13/26UDPVCPU the first 5 digits of serial number "24051" and prior, Mitsubishi Electric MELSEC-Q Series Q12DCCPU-V all versions, Mitsubishi Electric MELSEC-Q Series Q24DHCCPU-V(G) all versions, Mitsubishi Electric MELSEC-Q Series Q24/26DHCCPU-LS all versions, Mitsubishi Electric MELSEC-L series L02/06/26CPU(-P) the first 5 digits of serial number "24051" and prior, Mitsubishi Electric MELSEC-L series L26CPU-(P)BT the first 5 digits of serial number "24051" and prior and Mitsubishi Electric MELIPC Series MI5122-VW firmware versions "05" and prior allows a remote unauthenticated attacker to cause a denial of service (DoS) condition in Ethernet communications by sending specially crafted packets. A system reset of the products is required for recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix unlocked call to hns_roce_qp_remove()
Sashiko points out that hns_roce_qp_remove() requires the caller to hold
locks. The error flow in hns_roce_create_qp_common() doesn't hold those
locks for the error unwind so it risks corrupting memory.
Grab the same locks the other two callers use. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spidev: fix lock inversion between spi_lock and buf_lock
The spidev driver previously used two mutexes, spi_lock and buf_lock,
but acquired them in different orders depending on the code path:
write()/read(): buf_lock -> spi_lock
ioctl(): spi_lock -> buf_lock
This AB-BA locking pattern triggers lockdep warnings and can
cause real deadlocks:
WARNING: possible circular locking dependency detected
spidev_ioctl() -> mutex_lock(&spidev->buf_lock)
spidev_sync_write() -> mutex_lock(&spidev->spi_lock)
*** DEADLOCK ***
The issue is reproducible with a simple userspace program that
performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from
separate threads on the same spidev file descriptor.
Fix this by simplifying the locking model and removing the lock
inversion entirely. spidev_sync() no longer performs any locking,
and all callers serialize access using spi_lock.
buf_lock is removed since its functionality is fully covered by
spi_lock, eliminating the possibility of lock ordering issues.
This removes the lock inversion and prevents deadlocks without
changing userspace ABI or behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix deadlock when reading partition table
When one process(such as udev) opens ublk block device (e.g., to read
the partition table via bdev_open()), a deadlock[1] can occur:
1. bdev_open() grabs disk->open_mutex
2. The process issues read I/O to ublk backend to read partition table
3. In __ublk_complete_rq(), blk_update_request() or blk_mq_end_request()
runs bio->bi_end_io() callbacks
4. If this triggers fput() on file descriptor of ublk block device, the
work may be deferred to current task's task work (see fput() implementation)
5. This eventually calls blkdev_release() from the same context
6. blkdev_release() tries to grab disk->open_mutex again
7. Deadlock: same task waiting for a mutex it already holds
The fix is to run blk_update_request() and blk_mq_end_request() with bottom
halves disabled. This forces blkdev_release() to run in kernel work-queue
context instead of current task work context, and allows ublk server to make
forward progress, and avoids the deadlock.
[axboe: rewrite comment in ublk] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lock the inode in shared mode before starting fiemap
Currently fiemap does not take the inode's lock (VFS lock), it only locks
a file range in the inode's io tree. This however can lead to a deadlock
if we have a concurrent fsync on the file and fiemap code triggers a fault
when accessing the user space buffer with fiemap_fill_next_extent(). The
deadlock happens on the inode's i_mmap_lock semaphore, which is taken both
by fsync and btrfs_page_mkwrite(). This deadlock was recently reported by
syzbot and triggers a trace like the following:
task:syz-executor361 state:D stack:20264 pid:5668 ppid:5119 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5293 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6606
schedule+0xcb/0x190 kernel/sched/core.c:6682
wait_on_state fs/btrfs/extent-io-tree.c:707 [inline]
wait_extent_bit+0x577/0x6f0 fs/btrfs/extent-io-tree.c:751
lock_extent+0x1c2/0x280 fs/btrfs/extent-io-tree.c:1742
find_lock_delalloc_range+0x4e6/0x9c0 fs/btrfs/extent_io.c:488
writepage_delalloc+0x1ef/0x540 fs/btrfs/extent_io.c:1863
__extent_writepage+0x736/0x14e0 fs/btrfs/extent_io.c:2174
extent_write_cache_pages+0x983/0x1220 fs/btrfs/extent_io.c:3091
extent_writepages+0x219/0x540 fs/btrfs/extent_io.c:3211
do_writepages+0x3c3/0x680 mm/page-writeback.c:2581
filemap_fdatawrite_wbc+0x11e/0x170 mm/filemap.c:388
__filemap_fdatawrite_range mm/filemap.c:421 [inline]
filemap_fdatawrite_range+0x175/0x200 mm/filemap.c:439
btrfs_fdatawrite_range fs/btrfs/file.c:3850 [inline]
start_ordered_ops fs/btrfs/file.c:1737 [inline]
btrfs_sync_file+0x4ff/0x1190 fs/btrfs/file.c:1839
generic_write_sync include/linux/fs.h:2885 [inline]
btrfs_do_write_iter+0xcd3/0x1280 fs/btrfs/file.c:1684
call_write_iter include/linux/fs.h:2189 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f7d4054e9b9
RSP: 002b:00007f7d404fa2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f7d405d87a0 RCX: 00007f7d4054e9b9
RDX: 0000000000000090 RSI: 0000000020000000 RDI: 0000000000000006
RBP: 00007f7d405a51d0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 61635f65646f6e69
R13: 65646f7475616f6e R14: 7261637369646f6e R15: 00007f7d405d87a8
</TASK>
INFO: task syz-executor361:5697 blocked for more than 145 seconds.
Not tainted 6.2.0-rc3-syzkaller-00376-g7c6984405241 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor361 state:D stack:21216 pid:5697 ppid:5119 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5293 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6606
schedule+0xcb/0x190 kernel/sched/core.c:6682
rwsem_down_read_slowpath+0x5f9/0x930 kernel/locking/rwsem.c:1095
__down_read_common+0x54/0x2a0 kernel/locking/rwsem.c:1260
btrfs_page_mkwrite+0x417/0xc80 fs/btrfs/inode.c:8526
do_page_mkwrite+0x19e/0x5e0 mm/memory.c:2947
wp_page_shared+0x15e/0x380 mm/memory.c:3295
handle_pte_fault mm/memory.c:4949 [inline]
__handle_mm_fault mm/memory.c:5073 [inline]
handle_mm_fault+0x1b79/0x26b0 mm/memory.c:5219
do_user_addr_fault+0x69b/0xcb0 arch/x86/mm/fault.c:1428
handle_page_fault arch/x86/mm/fault.c:1519 [inline]
exc_page_fault+0x7a/0x110 arch/x86/mm/fault.c:1575
asm_exc_page_fault+0x22/0x30 arch/x86/include/asm/idtentry.h:570
RIP: 0010:copy_user_short_string+0xd/0x40 arch/x86/lib/copy_user_64.S:233
Code: 74 0a 89 (...)
RSP: 0018:ffffc9000570f330 EFLAGS: 000502
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: fix deadlock and link starvation in outgoing data path
The current implementation queues up new control and user packets as needed
and processes this queue down to the ldisc in the same code path.
That means that the upper and the lower layer are hard coupled in the code.
Due to this deadlocks can happen as seen below while transmitting data,
especially during ldisc congestion. Furthermore, the data channels starve
the control channel on high transmission load on the ldisc.
Introduce an additional control channel data queue to prevent timeouts and
link hangups during ldisc congestion. This is being processed before the
user channel data queue in gsm_data_kick(), i.e. with the highest priority.
Put the queue to ldisc data path into a workqueue and trigger it whenever
new data has been put into the transmission queue. Change
gsm_dlci_data_sweep() accordingly to fill up the transmission queue until
TX_THRESH_HI. This solves the locking issue, keeps latency low and provides
good performance on high data load.
Note that now all packets from a DLCI are removed from the internal queue
if the associated DLCI was closed. This ensures that no data is sent by the
introduced write task to an already closed DLCI.
BUG: spinlock recursion on CPU#0, test_v24_loop/124
lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0
CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
do_raw_spin_lock+0x76/0xa0
_raw_spin_lock_irqsave+0x72/0x80
uart_write_room+0x3b/0xc0
gsm_data_kick+0x14b/0x240 [n_gsm]
gsmld_write_wakeup+0x35/0x70 [n_gsm]
tty_wakeup+0x53/0x60
tty_port_default_wakeup+0x1b/0x30
serial8250_tx_chars+0x12f/0x220
serial8250_handle_irq.part.0+0xfe/0x150
serial8250_default_handle_irq+0x48/0x80
serial8250_interrupt+0x56/0xa0
__handle_irq_event_percpu+0x78/0x1f0
handle_irq_event+0x34/0x70
handle_fasteoi_irq+0x90/0x1e0
__common_interrupt+0x69/0x100
common_interrupt+0x48/0xc0
asm_common_interrupt+0x1e/0x40
RIP: 0010:__do_softirq+0x83/0x34e
Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d
e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61
80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00
RSP: 0018:ffffc90000003f98 EFLAGS: 00000286
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7
RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000
? __do_softirq+0x73/0x34e
irq_exit_rcu+0xb5/0x100
common_interrupt+0xa4/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x1e/0x40
RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50
Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff
48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff
65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44
RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001
RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8
? _raw_spin_unlock_irqrestore+0x23/0x50
gsmtty_write+0x65/0x80 [n_gsm]
n_tty_write+0x33f/0x530
? swake_up_all+0xe0/0xe0
file_tty_write.constprop.0+0x1b1/0x320
? n_tty_flush_buffer+0xb0/0xb0
new_sync_write+0x10c/0x190
vfs_write+0x282/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f3e5e35c15c
Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: call ksmbd_vfs_kern_path_end_removing() on some error paths
There are two places where ksmbd_vfs_kern_path_end_removing() needs to be
called in order to balance what the corresponding successful call to
ksmbd_vfs_kern_path_start_removing() has done, i.e. drop inode locks and
put the taken references. Otherwise there might be potential deadlocks
and unbalanced locks which are caught like:
BUG: workqueue leaked lock or atomic: kworker/5:21/0x00000000/7596
last function: handle_ksmbd_work
2 locks held by kworker/5:21/7596:
#0: ffff8881051ae448 (sb_writers#3){.+.+}-{0:0}, at: ksmbd_vfs_kern_path_locked+0x142/0x660
#1: ffff888130e966c0 (&type->i_mutex_dir_key#3/1){+.+.}-{4:4}, at: ksmbd_vfs_kern_path_locked+0x17d/0x660
CPU: 5 PID: 7596 Comm: kworker/5:21 Not tainted 6.1.162-00456-gc29b353f383b #138
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
process_one_work.cold+0x57/0x5c
worker_thread+0x82/0x600
kthread+0x153/0x190
ret_from_fork+0x22/0x30
</TASK>
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
In the mentioned "Fixes" commit, various work tasks triggering devlink
health reporter recovery were switched to use netdev_trylock to protect
against concurrent tear down of the channels being recovered. But this
had the side effect of introducing potential deadlocks because of
incorrect lock ordering.
The correct lock order is described by the init flow:
probe_one -> mlx5_init_one (acquires devlink lock)
-> mlx5_init_one_devl_locked -> mlx5_register_device
-> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe
-> register_netdev (acquires rtnl lock)
-> register_netdevice (acquires netdev lock)
=> devlink lock -> rtnl lock -> netdev lock.
But in the current recovery flow, the order is wrong:
mlx5e_tx_err_cqe_work (acquires netdev lock)
-> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report
-> devlink_health_report (acquires devlink lock => boom!)
-> devlink_health_reporter_recover
-> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx
-> mlx5e_tx_reporter_err_cqe_recover
The same pattern exists in:
mlx5e_reporter_rx_timeout
mlx5e_reporter_tx_ptpsq_unhealthy
mlx5e_reporter_tx_timeout
Fix these by moving the netdev_trylock calls from the work handlers
lower in the call stack, in the respective recovery functions, where
they are actually necessary. |
