| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix response resource leak on queue teardown
When an nvme target with rdma transport is removed while I/Os are in
flight, a response can be posted but its send completion is never
delivered before the connection is torn down. As a result
nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for
the response, and this leaks the allocated RDMA read/write context and
request SGLs.
These leaks are recreated by running blktests nvme/061 with the rdma
transport and the siw driver. Kernel kmemleak feature reports them as
follows:
unreferenced object 0xffff88812bc490c0 (size 32):
comm "kworker/2:1H", pid 409, jiffies 4307744490
backtrace (crc 89afd339):
__kmalloc_noprof+0x5f9/0x890
sgl_alloc_order+0x7b/0x380
nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet]
nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma]
nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma]
__ib_process_cq+0x149/0x4c0 [ib_core]
ib_cq_poll_work+0x49/0x160 [ib_core]
process_one_work+0x8b2/0x1640
worker_thread+0x5fd/0xfe0
kthread+0x367/0x460
ret_from_fork+0x655/0x9d0
ret_from_fork_asm+0x1a/0x30
unreferenced object 0xffff88814bd05e80 (size 64):
comm "kworker/3:1H", pid 148, jiffies 4295195428
backtrace (crc e35510cb):
__kmalloc_noprof+0x5f9/0x890
rdma_rw_ctx_init+0x333/0x1fa0 [ib_core]
nvmet_rdma_map_sgl_keyed+0x5c8/0x12e0 [nvmet_rdma]
nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma]
__ib_process_cq+0x149/0x4c0 [ib_core]
ib_cq_poll_work+0x49/0x160 [ib_core]
process_one_work+0x8b2/0x1640
worker_thread+0x5fd/0xfe0
kthread+0x367/0x460
ret_from_fork+0x655/0x9d0
ret_from_fork_asm+0x1a/0x30
To avoid the memory leaks, reclaim the memory of the in-flight responses
when the queue QP is torn down. Call nvmet_rdma_free_rsp_resources()
that frees up the RDMA read/write context and the request SGLs of such
responses. |
| In the Linux kernel, the following vulnerability has been resolved:
media: bcm2835-unicam: Fix asc leaked in error/remove path
v4l2_async_nf_add_fwnode_remote() allocates the asc, which is freed when
v4l2_async_nf_cleanup() is called.
Call v4l2_async_nf_cleanup() properly in the driver paths.
Discovered with kmemleak after rmmod:
unreferenced object 0xffff000084526b80 (size 64):
comm "modprobe", pid 185, jiffies 4295013512
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 e8 0d ff bf 00 00 ff ff ................
40 83 bc 84 00 00 ff ff 60 83 bc 84 00 00 ff ff @.......`.......
backtrace (crc ac584083):
[<00000000ffb081a7>] kmemleak_alloc+0x38/0x44
[<00000000d2fd9301>] __kmalloc+0x1b0/0x250
[<000000004dd5354d>] __v4l2_async_nf_add_fwnode+0x28/0x9c
[<0000000067587657>] __v4l2_async_nf_add_fwnode_remote+0x3c/0x64 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix leak in ath11k_service_ready_ext_event()
Currently, during ath11k_service_ready_ext_event() processing,
svc_rdy_ext.mac_phy_caps can be allocated during TLV parsing. This is a
temporary allocation that is freed on the success path, but not on the
error path. If parsing succeeds far enough to allocate mac_phy_caps and
then fails on a later TLV, the allocation leaks. So free the allocation
on the error path.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt792x: Fix memory leak in SDIO TX path
When tx_prepare_skb() returns an error in the SDIO TX path, the
skb is not freed, leading to a memory leak. This can occur when
zero-length frames (such as WNM NULL frames) are dropped to prevent
potential hardware TX hangs.
Fix this by properly releasing the skb with ieee80211_tx_status_ext()
when tx_prepare_skb() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Release core resources
Core resources such as the DisplayPort AUX channel get initialized and
registered during dw_dp_bind(), but are never unregistered, which may
lead to memory leaks and/or use-after-free:
[ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0
[ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658
[ 224.662612]
[ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT
[ 224.662759] Hardware name: Radxa ROCK 5B (DT)
[ 224.662762] Call trace:
[ 224.662764] show_stack+0x20/0x38 (C)
[ 224.662772] dump_stack_lvl+0x6c/0x98
[ 224.662777] print_report+0x160/0x4b8
[ 224.662783] kasan_report+0xb4/0xe0
[ 224.662790] __asan_report_load8_noabort+0x20/0x30
[ 224.662796] device_is_dependent+0xe0/0x2b0
[ 224.662802] device_is_dependent+0x108/0x2b0
[ 224.662808] device_link_add+0x1f8/0x10b0
[ 224.662813] devm_of_phy_get_by_index+0x120/0x200
[ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp]
[ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm]
[ 224.662864] component_bind_all+0x3a8/0x720
[ 224.662869] rockchip_drm_bind+0x120/0x390 [rockchipdrm]
[ 224.662899] try_to_bring_up_aggregate_device+0x76c/0x838
[ 224.662904] component_master_add_with_match+0x1f4/0x230
[ 224.662909] rockchip_drm_platform_probe+0x420/0x538 [rockchipdrm]
[ 224.662939] platform_probe+0xe8/0x168
[ 224.662945] really_probe+0x340/0x828
[ 224.662950] __driver_probe_device+0x2e0/0x350
[ 224.662954] driver_probe_device+0x80/0x140
[ 224.662959] __driver_attach+0x398/0x460
[ 224.662964] bus_for_each_dev+0xe0/0x198
[ 224.662968] driver_attach+0x50/0x68
[ 224.662972] bus_add_driver+0x2a0/0x4c0
[ 224.662977] driver_register+0x294/0x360
[ 224.662982] __platform_driver_register+0x7c/0x98
[ 224.662987] rockchip_drm_init+0xc4/0xff8 [rockchipdrm]
Since a previous commit exported dw_dp_unbind() function in DW DP core
library to take care of the necessary cleanup, use this in the
component's unbind() callback, as well as in its bind() error path. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during early boot, real
module unload of a clk driver that owns GDSCs, or an OF-overlay tear-
down) the next gdsc_init() will end up trying to re-register a name
that is still in the list and pm_genpd_init() returns -EEXIST.
While we are here, flip the order so the consumer-facing OF provider
entry is the first thing removed -- otherwise a fresh
of_genpd_get_from_provider() call racing with the teardown could
attach to a domain that is mid-removal.
Iterate the scs[] array and pm_genpd_remove() each registered domain
after the subdomain links are torn down. The regulators stay devm-
managed (devm_regulator_get_optional() in gdsc_register()), so the
release happens automatically when the underlying device is unbound;
just the genpd accounting needs to be undone explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Free transport channel on IDR failure
If transport channel setup succeeds but the following IDR insertion fails,
the error path destroys the transport device and frees the channel info
without invoking the transport cleanup callback.
Call chan_free() before destroying the device so transport specific
resources such as IRQs, mailbox channels and mapped shared memory are
released consistently with the normal teardown path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Free RX data on late probe failure
hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning.
If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears
down the device data without calling hfi1_free_rx(). This leaks netdev_rx
and its dummy netdev.
Free the RX support after IB unregistration and before postinit_cleanup(),
as done on normal device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Drop handle on protocol bind failures
The SCMI bus notifier acquires an SCMI handle when the driver core emits
BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe
callback. The protocol probe path only checks whether sdev->handle is
set.
If device_link_add() fails after the handle has been acquired, the
protocol device can still bind with a valid handle but without the
dependency link to the SCMI parent. A concurrent parent unbind can then
miss the child and tear down the SCMI instance while the child still
holds a handle into it.
If the protocol driver probe later fails, for example with
-EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather
than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the
handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind
leaked the SCMI instance users refcount and left sdev->handle set after
the failed probe.
Make the link helper report failure and drop the acquired handle if the
link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the
same cleanup path used for unbind so failed probes balance the earlier
BUS_NOTIFY_BIND_DRIVER acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: free STAG index when TPT entry write fails
write_tpt_entry() allocates a new STAG index with c4iw_get_resource() and
bumps stats.stag.cur before programming the entry. When
write_adapter_mem() fails, it returns the error without releasing the index
or reversing the statistic. No MR is inserted into rhp->mrs, so
deregistration never reclaims it, leaking the index until device teardown.
Record whether this call allocated the index and, on a failed write, return
it to tpt_table and decrement stats.stag.cur. Key the rollback on both the
write error and that flag, not the error alone: a non-reset update carries
a caller-owned STAG that this call did not allocate and must not free. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32: dcmi: fix some error handling bugs in probe()
There are a few issues here:
1) After we assign:
chan = dma_request_chan(&pdev->dev, "tx");
Then the error paths need to clean up before returning. The first
error path does a direct return.
2) The error paths check "dcmi->mdma_chan" but that is not assigned
until later so it results in memory leaks. Test "mdma_chan"
instead.
3) The error handling calls dma_release_channel(dcmi->dma_chan) before
"dcmi->dma_chan" has been assigned which leads to a NULL pointer
dereference. Use the "chan" variable instead.
I also moved the call to dma_release_channel() after the call to
dma_release_channel() so it mirrors the allocation code better. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: generic: free maps on pinctrl_generic_to_map() failure
pinctrl_generic_to_map() parses DT configuration and allocates pinctrl
maps via pinctrl_utils_reserve_map().
If subsequent steps (such as pinctrl_utils_add_map_mux(),
pinctrl_generic_add_group(), pinconf_generic_parse_dt_config(), or
pinctrl_utils_add_map_configs()) return an error, *maps may contain
partially allocated map entries. Returning the error directly without
freeing *maps leaks the allocated mapping memory across all drivers
that rely on pinctrl_generic_to_map().
Fix this by calling pinctrl_utils_free_map() and resetting *maps,
*num_maps, and *num_reserved_maps in the error path of
pinctrl_generic_to_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix devres accumulation across driver rebind
imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev
is the CPU device from get_cpu_device(0). That device is never unbound, so
its devres list is never released, and imx6q_cpufreq_remove() does not free
the array either. Every probe therefore adds an allocation that stays for
the lifetime of the system.
Allocate against the platform device instead. Its devres is released when
the driver is unbound, which is exactly the lifetime the array wants:
imx6q_set_target() reads it, and nothing may reach that after
cpufreq_unregister_driver().
That makes the array actually go away on unbind, so also clear the
file-scope pointer in remove and on the failed-probe path, rather than
leave it pointing at memory devres is about to release.
Tested by rebinding the driver on qemu's mcimx6ul-evk. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Free debugfs on registration failure
c4iw_alloc() creates the per-device debugfs tree (dev->debugfs_root via
setup_debugfs()), but it is removed only in c4iw_remove(), not in
c4iw_dealloc(). When RDMA device registration fails, the registration
worker's err_dealloc_ctx path calls c4iw_dealloc() directly, bypassing
c4iw_remove(), so the debugfs dentries leak and outlive the freed
c4iw_dev.
Move debugfs_remove_recursive() into c4iw_dealloc() so every path that
frees ctx->dev also removes its debugfs tree. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Release the export reference when reaping open stateids
nfs4_put_stid() releases the svc_export tracked in
nfs4_stid.sc_export, but free_ol_stateid_reaplist() frees open and
lock stateids by calling ->sc_free() directly, bypassing that path.
An open stateid takes an sc_export reference in nfs4_open() and a
lock stateid takes its own in init_lock_stateid(); both reach
free_ol_stateid_reaplist() through their normal teardown, the open
stateid via release_open_stateid() and the lock stateid via
nfsd4_release_lockowner(), each through put_ol_stateid_locked().
The reference is therefore never dropped, pinning the export and
blocking unmount for the lifetime of the stateid.
Release sc_export in free_ol_stateid_reaplist() the way
nfs4_put_stid() does. ->sc_free() runs once per stateid, and a
stateid reaches free_ol_stateid_reaplist() or nfs4_put_stid() but
never both, so the reference is dropped exactly once. Revoked
stateids reach this path with sc_export already cleared by
drop_stid_export(), so they are skipped rather than double-freed.
nfs4_put_stid() itself read sc_export before acquiring cl_lock.
drop_stid_export() clears that field and releases the reference
under cl_lock, so a concurrent revocation could drop the export in
the window between the read and the final put, releasing the same
reference twice. Read sc_export while cl_lock is held so the two
paths serialize and the reference is released exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence.
If one of them fails, it jumps to error_no_memory and returns -ENOMEM
without releasing the pools that were already allocated, leaking them.
Release the already-allocated pools before returning. isp4if_gpu_mem_free()
is a no-op on pools that were not allocated, so calling
isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that
succeeded.
isp4if_gpu_mem_free() previously logged an error for a NULL entry, which
is a normal case during partial-allocation cleanup, so make it silent. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: free the HCI command when it is cancelled
mgmt_hci_cmd_sync() queues the pending command with a NULL destroy
callback, so it is only freed if send_hci_cmd_sync() runs. A cancelled
entry is leaked, as _hci_cmd_sync_cancel_entry() does not release
entry->data when there is no destroy callback, and hci_cmd_sync_clear()
cancels every pending entry when the controller is unregistered. Nothing
else reclaims it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback. The now-empty done label is
replaced by a direct return. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: free the mesh send cancel command when it is cancelled
mesh_send_cancel() queues the pending command with a NULL destroy
callback, so it is only freed if send_cancel() runs. A cancelled entry is
leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when
there is no destroy callback, and hci_cmd_sync_clear() cancels every
pending entry when the controller is unregistered. Nothing else reclaims
it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths
adv_timeout_expire() hands a kmalloc()ed instance byte to
hci_cmd_sync_queue() with a NULL destroy callback, and only
adv_timeout_expire_sync() frees it. That leaks on two paths:
- the return value is not checked, and hci_cmd_sync_queue() does not
take ownership when it fails (-ENETDOWN, -ENODEV, -ENOMEM);
- a cancelled entry is not released, as _hci_cmd_sync_cancel_entry()
does not free entry->data when there is no destroy callback.
hci_cmd_sync_clear() cancels every pending entry when the controller
is unregistered.
Free the buffer from a destroy callback, and in the caller when the entry
could not be queued at all. |
