| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Fix payload page pool error cleanup
The payload page pool pointer contains an error pointer when its
allocation fails. The cleanup path passes that error pointer to
page_pool_destroy() instead of destroying the header page pool. This
can dereference the error pointer and leave the header page pool
allocated.
Destroy the header page pool instead. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Handle maximum standalone channels
Standalone channels use one NAPI vector for each Tx and Rx queue.
fbnic's allocation path excludes FBNIC_MAX_TXQS from that layout. A
64-Tx/64-Rx configuration therefore records 128 vectors but allocates
only 64, leaving NULL entries that resource setup dereferences.
Include the maximum vector count in standalone allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_info_copy()
When debug_register_static() fails, it clears areas, active_pages and
active_entries but leaves the area bounds unchanged. Copying such an
area, either by opening its view file or via debug_dump(), makes
debug_info_copy() dereference the NULL pointers.
Skip the copy loop when the source has no areas. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix NULL current_pwq deref in flush dependency check
check_flush_dependency() uses current_wq_worker() to determine whether
the caller is a workqueue worker and then dereferences worker->current_pwq
to test whether the current workqueue is WQ_MEM_RECLAIM.
current_wq_worker() only means that %current has PF_WQ_WORKER set. A
kworker can reach check_flush_dependency() while it is not executing a
work item. One such path is worker_thread() acting as the pool manager,
where create_worker() does GFP_KERNEL allocation and the allocation path
invokes the OOM notifier. In that state worker->current_pwq is NULL
because current_pwq is set only by process_one_work() and cleared again
after the work function returns.
[ 416.760634][ T375] Call trace:
[ 416.760638][ T375] check_flush_dependency+0x80/0x120 (P)
[ 416.760648][ T375] __flush_work+0x98/0x224
[ 416.760657][ T375] flush_work+0x30/0x44
[ 416.760665][ T375] ...
[ 416.760710][ T375] blocking_notifier_call_chain+0x58/0xa0
[ 416.760719][ T375] out_of_memory+0xb4/0x458
[ 416.760730][ T375] __alloc_pages_may_oom+0x11c/0x1a8
[ 416.760739][ T375] __alloc_pages_slowpath+0x314/0x46c
[ 416.760746][ T375] __alloc_frozen_pages_noprof+0x110/0x1a4
[ 416.760753][ T375] new_slab+0x12c/0x484
[ 416.760759][ T375] ___slab_alloc+0x7a8/0xc7c
[ 416.760765][ T375] __slab_alloc+0x74/0xd8
[ 416.760772][ T375] __kmalloc_cache_node_noprof+0x2ac/0x304
[ 416.760779][ T375] alloc_worker+0x28/0x60
[ 416.760785][ T375] create_worker+0x4c/0x20c
[ 416.760790][ T375] worker_thread+0xe8/0x2b8
[ 416.760796][ T375] kthread+0x1a8/0x200
[ 416.760805][ T375] ret_from_fork+0x10/0x20
Guard the WQ_MEM_RECLAIM-worker warning with worker->current_pwq. If the
kworker is not currently executing a work item, there is no current
workqueue to diagnose with that warning. The PF_MEMALLOC warning is left
unchanged so explicit reclaim context flushing a !WQ_MEM_RECLAIM target
is still reported. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl()
Map failure from pvr_mmu_map_sgl() interface was not returned correctly
to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to
continue instead of returning an error to caller.
Fix it by returning a proper error code from pvr_mmu_map_sgl() interface.
Call stack for crash:
[ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 1179.295067] Mem abort info:
[ 1179.297877] ESR = 0x0000000096000004
[ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1179.306987] SET = 0, FnV = 0
[ 1179.310048] EA = 0, S1PTW = 0
[ 1179.313198] FSC = 0x04: level 0 translation fault
[ 1179.318096] Data abort info:
[ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000
[ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000
[ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP
[ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6
[ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT
[ 1179.388120] Tainted: [D]=DIE
[ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT)
[ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr]
[ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr]
[ 1179.416848] sp : ffff8000839ab8c0
[ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000
[ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6
[ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247
[ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002
[ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
[ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480
[ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8
[ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007
[ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000
[ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000
[ 1179.491433] Call trace:
[ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P)
[ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr]
[ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr]
[ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm]
[ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm]
[ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr]
[ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr]
[ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr]
[ 1179.534018] drm_ioctl_kernel+0xb8/0x128
[ 1179.537941] drm_ioctl+0x21c/0x4ec
[ 1179.541337] __arm64_sys_ioctl+0xac/0x108
[ 1179.545344] invoke_syscall+0x44/0x100
[ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0
[ 1179.553790] do_el0_svc+0x1c/0x28
[ 1179.557106] el0_svc+0x34/0xf0
[ 1179.560159] el0t_64_sync_handler+0xd0/0xe4
[ 1179.564334] el0t_64_sync+0x198/0x19c
[ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421)
[ 1179.574081] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix NULL pointer dereference on fence allocation failure
virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL,
but its caller like virtio_gpu_init_submit() never checks it. Later,
virtio_gpu_init_submit() passes the NULL fence to
virtio_gpu_fence_event_create(), which unconditionally dereferences it.
Found when fuzzing the virtio driver with Syzkaller:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0
Call Trace:
<TASK>
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fab471a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd
RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003
RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:00000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: of_property: Omit bus properties without a subordinate bus
A bridge (a device with a Type 1 header) may not have a secondary bus
allocated (pdev->subordinate), e.g., if there are no available bus numbers
or the bridge secondary/subordinate bus numbers are not writable.
The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map()
dereference pdev->subordinate without checking it. When
CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer
dereference and early boot hang.
Generate 'bus-range' and 'interrupt-map' properties only when a subordinate
bus exists. Keep the node and its remaining properties for bridges without
one.
The problem was latent since 407d1a51921e ("PCI: Create device tree node
for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create
device tree PCI host bridge node"), which appeared in v6.15. Before
1f340724419e, of_pci_make_dev_node() returned early because the parent OF
node was missing.
[bhelgaas: move pdev->subordinate test to callees, commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not
connected as long as deferred setup is enabled:
if (sk->sk_state != BT_CONNECTED &&
!rfcomm_pi(sk)->dlc->defer_setup) {
err = -ENOTCONN;
break;
}
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind()
creates a child socket for an incoming connection on a listening socket
that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The
session, however, can go away underneath it.
rfcomm_recv_disc() forces the dlc state before tearing it down:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers
BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state
already BT_CLOSED that switch does not match and the function falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL, while
d->defer_setup stays 1.
A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after
that point therefore skips the -ENOTCONN path -- sk->sk_state is
BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the
NULL session. No race is needed: once the DISC has been processed, the
dereference is unconditional.
Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over
/dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM
PSM, starts a session and sends SABM for a channel bound with
BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been
accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted
socket then hits:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780
Call Trace:
<TASK>
do_sock_getsockopt+0x3ad/0x7d0
__sys_getsockopt+0x10e/0x1b0
__x64_sys_getsockopt+0xc2/0x160
do_syscall_64+0xda/0x4b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
0x10 is the offset of sock in struct rfcomm_session;
rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt().
Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the
deferred setup accept") fixed the same "a remote DISC clears the session
while deferred setup is still flagged" problem in rfcomm_dlc_accept();
this is the remaining instance of it, in the getsockopt path.
Deferred setup only leaves a socket usable here once it has reached
BT_CONNECT2, so restrict the exception to that state and check that a
session is actually present before following it. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check
The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in
fh_verify of directories") details the assumption that justified
adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is
invalid (in the case of NFS reexport).
When NFSD exports an NFS filesystem it is very possible for
nfsd_mode_check() to encounter a @dentry that doesn't have
i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and
NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()).
So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir
return on that branch must stay. It guards the subsequent
lookup_one_unlocked() -> __lookup_slow() path, which calls
inode->i_op->lookup() with no NULL check, so returning nfserr_notdir
is what keeps a client LOOKUP into such a @dentry from dereferencing
a NULL method pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix AF_XDP TX timestamp teardown NULL dereference
During XSK TX queue teardown, outstanding descriptors are completed
without a CQE. If one requested a TX timestamp, the completion path
passes that NULL CQE to mlx5e_xsk_fill_timestamp(), which dereferences
it.
Return zero when no CQE is available, indicating that teardown did not
produce a TX timestamp. |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject polled dio with user integrity metadata
IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while
iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O
always uses __blkdev_direct_IO(), which never publishes the bio for
polling, so IOPOLL calls bio_poll() on the uio_meta.
Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device
(scsi_debug dif=1 dix=1). KASAN reports:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000004
KASAN: null-ptr-deref in range
[0x0000000000000020-0x0000000000000027]
RIP: 0010:bio_poll+0x9d/0x4b0
Call Trace:
iocb_bio_iopoll+0x5b/0x80
io_uring_classic_poll+0xf3/0x140
io_do_iopoll+0x4e3/0xc00
io_iopoll_check+0x275/0x560
__do_sys_io_uring_enter+0x2e5/0x720
Return -EOPNOTSUPP when HIPRI is combined with user metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: vmgenid: set driver_data before registering notification handlers
Both probe paths register their notification handler before assigning
driver_data, which the handler dereferences.
In the devicetree path, the notification IRQ can fire as soon as
devm_request_irq() registers the handler: the interrupt may already be
pending at probe time, for example when a VMM injects the
generation-changed notification while restoring a guest from a snapshot
that was taken before the driver had probed (Firecracker does exactly
this on snapshot restore). The IRQ is also requested with IRQF_SHARED,
so another device sharing the line can trigger the handler just as
early. The handler then calls vmgenid_notify(), which dereferences the
still-NULL driver_data and panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none)
Hardware name: linux,dummy-virt (DT)
pc : vmgenid_notify.isra.0+0x24/0x8c
lr : vmgenid_of_irq_handler+0x14/0x34
Call trace:
vmgenid_notify.isra.0+0x24/0x8c (P)
vmgenid_of_irq_handler+0x14/0x34
__handle_irq_event_percpu+0x44/0x1bc
handle_irq_event+0x4c/0xb4
handle_fasteoi_irq+0xf8/0x1f8
The ACPI path has the same ordering problem: the handler is installed
with acpi_install_notify_handler() before driver_data is assigned.
ACPI notifications are dispatched asynchronously from a workqueue, so
the window is narrow, but a notification arriving between the two calls
hits the same NULL dereference.
Assign driver_data before registering the handlers. The state is fully
initialized at that point, so the handlers are safe to run. Should
registration fail, the probe error path leaves no dangling pointer
behind: the driver core clears driver_data in device_unbind_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: fix socket lifetime on netdevice registration failure
pfcp_newlink() creates the UDP socket before register_netdevice().
If registration fails after pfcp_dev_init() succeeds, the core calls
pfcp_dev_uninit(), which releases the socket and clears pfcp->sk.
The newlink error path then releases it again, causing a NULL pointer
dereference. This was observed with failslab fault injection:
FAULT_INJECTION: forcing a failure.
kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net)
BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50
Read of size 8 at addr 0000000000000120 by task ip/1037
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x78/0x90
print_report+0x468/0x5cc
kasan_report+0xa4/0xf0
__asan_load8+0x7c/0xd0
udp_tunnel_sock_release+0x1c/0x50
pfcp_newlink+0x128/0x184
rtnl_newlink+0x848/0xe44
rtnetlink_rcv_msg+0x468/0x514
netlink_rcv_skb+0xc0/0x1f0
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x558
netlink_sendmsg+0x2b8/0x584
...
Return from pfcp_del_sock() if pfcp->sk is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled
Previously, BPID assignment under CONFIG_DCB assumed
`queue_to_pfc_map` was always initialized. For SDP VFs this leads to
invalid memory access as it was not initialized.
This patch adds a NULL check for `queue_to_pfc_map` before
dereferencing it. Also, simplifies the logic by always assigning a
default BPID first, then conditionally overriding it if CONFIG_DCB is
enabled and the map exists. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured BGP neighbor to cause a denial of service via a BGP route update when specific routing-policy resolution-map and policy event-tracing configuration is enabled. |
| A NULL Pointer Dereference vulnerability in the rpd routing daemon of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated configured BGP peer to cause a denial of service via a BGP UPDATE when ISO-VPN and egress-protection configuration is enabled. |
| Null pointer dereference in Windows Schannel allows an authorized attacker to elevate privileges locally. |
| FreeRDP before 3.32.0 contains a NULL pointer dereference vulnerability in the client video redirection channel that allows malicious servers to crash clients by sending out-of-order messages. Attackers can send a Geometry CLEAR message that nulls presentation->geometry, then send VideoData that dereferences it, causing client denial of service. |
| Null pointer dereference in Active Directory Domain Services allows an authorized attacker to deny service over a network. |
| Null pointer dereference in Windows DHCP Server allows an unauthorized attacker to deny service over a network. |
