| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a
device reference, but the local dev variable is declared with
__free(put_device), dropping the reference at the end of each iteration.
Meanwhile, devm_add_action_or_reset() saves the dev pointer for
gpio_secondary_unset() without incrementing its reference count, which
could lead to a use-after-free during driver teardown if the device is
released in the interim.
Acquire an explicit device reference with get_device() when registering
the devres action, and drop it with put_device() inside
gpio_secondary_unset(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix UAF in async copy cancel and shutdown
An async copy could be freed or used after free while a teardown caller
(OFFLOAD_CANCEL, nfsd4_shutdown_copy, nfsd4_cancel_copy_by_sb) raced the
copy kthread:
- find_async_copy() bumped copy->refcount but left the copy on
clp->async_copies, so the reaper's cleanup_async_copy() could run
release_copy_files() concurrently with a cancel/shutdown caller. Both
put and NULL nf_src/nf_dst without a common lock, double-putting the
nfsd_file and freeing it early.
- nfsd4_do_async_copy() set NFSD4_COPY_F_STOPPED before its final uses
of the copy (nfsd_update_cmtime_attr() on copy->nf_dst,
nfsd4_send_cb_offload()). nfsd4_stop_copy() treats a set STOPPED bit
as "kthread done, skip kthread_stop()", so a teardown caller ran
release_copy_files() -- which puts and NULLs nf_dst -- while the
kthread still dereferenced it (NULL/UAF).
- copy->copy_task was never pinned. The one-shot kthread self-reaps on
return, so kthread_stop()'s get_task_struct() could touch a freed
task_struct.
- co_cb is embedded in the copy, but nfsd4_send_cb_offload() held a
reference only on the client, so a concurrent teardown could free
the copy while the CB_OFFLOAD callback was in flight.
Fix the teardown lifetime as a whole:
- find_async_copy() unlinks the copy (clear cp_clp, list_del_init)
under async_lock; the cancel, shutdown, and sb-cancel paths drop the
list-membership reference via nfs4_put_copy() after nfsd4_stop_copy().
Drop the now-redundant list_del fixup from cleanup_async_copy().
- Because unlinking hides the copy from the reaper, its
cleanup_async_copy() can no longer remove the copy's s2s_cp_stateids
entry; the cancel/shutdown/sb-cancel paths now call
nfs4_free_copy_state() themselves (while cp_clp is still valid) so
the entry does not dangle at freed memory for the laundromat and
manage_cpntf_state() to dereference.
- Give the kthread its own reference, taken in nfsd4_copy() before
wake_up_process() and dropped at the end of nfsd4_do_async_copy();
call wake_up_process() before list_add().
- Pin the task_struct with get_task_struct() in nfsd4_copy(), released
in nfs4_put_copy(), so kthread_stop() is safe whenever the kthread
exits. Set NFSD4_COPY_F_STOPPED only in nfsd4_stop_copy(), which now
always kthread_stop()s before release_copy_files(); completion is
still reported via NFSD4_COPY_F_COMPLETED, so
nfsd4_has_active_async_copies() is unaffected. Each teardown caller
removes the copy from clp->async_copies first, so kthread_stop() runs
exactly once.
- Take a copy reference in nfsd4_send_cb_offload(), dropped in
nfsd4_cb_offload_release(). The kthread still holds its own reference
there, so the refcount_inc() cannot race the final free.
- Read cp_clp with smp_load_acquire() to pair with the unordered
set_bit()/clear_bit() writers (Documentation/atomic_bitops.rst). |
| In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
another rule still references it, and a later autoremove dereferences the
freed pathname while comparing rules.
Move the temporary-tree put to audit_rule_change(), the caller that owns
deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both
successful deletion and -ENOENT still release the parser-owned tree.
[PM: dropped unnecessary comment for line length reasons] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
rfcomm_session_del()
kfree(s)
rfcomm_unlock()
walk s->dlcs
The callback can then read a freed session list head and touch freed DLCs
while updating their flags or timers.
Serialize the session lookup and DLC traversal in rfcomm_security_cfm()
with rfcomm_mutex. This matches the existing RFCOMM session lifetime
rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink()
from tearing the objects down while the callback is using them.
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440
Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89
Workqueue: hci0 hci_rx_work
Call Trace:
rfcomm_security_cfm+0x41c/0x440
hci_encrypt_cfm+0x139/0x590
hci_encrypt_change_evt+0x37b/0xc40
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 69:
rfcomm_session_add+0x9e/0x2f0
rfcomm_run+0x44b/0x41e0
Freed by task 69:
kfree+0x131/0x3c0
rfcomm_session_del+0x188/0x220
rfcomm_run+0x1985/0x41e0 |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: reload header after pskb_may_pull()
mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop
when an MPLS route has multiple nexthops. While walking the MPLS label
stack, the hash routine caches hdr for the current label. After finding
the bottom-of-stack label, it calls pskb_may_pull() before reading the
inner IP header.
If an skb is constructed with the inner IP header in nonlinear data and
insufficient tailroom in the linear head, pskb_may_pull() calls
pskb_expand_head() to replace the skb head and free the old one. This
leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr
again when it performs a second pull for the larger header.
The issue was found through static analysis. A reproducer sending a legal
Geneve packet through a bareudp/MPLS multipath setup triggered the same
KASAN report in 2 of 2 unpatched runs:
BUG: KASAN: slab-use-after-free in mpls_select_multipath
Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23
Call Trace:
mpls_select_multipath
mpls_forward
__netif_receive_skb_list_core
netif_receive_skb_list_internal
napi_complete_done
gro_cell_poll
__napi_poll
net_rx_action
Freed by task 23:
kfree
pskb_expand_head
__pskb_pull_tail
mpls_select_multipath
Reload hdr from the current skb head after each successful pull before
deriving the inner IPv4 or IPv6 header pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: always drain cache_cleaner before destroying a cache_detail
sunrpc_destroy_cache_detail() only cancels the global cache_cleaner
delayed_work when cache_list is empty. During per-netns teardown
cache_list is never empty because init_net's caches remain registered,
so the cancel never fires. After unlink, the caller proceeds to
cache_destroy_net() which kfrees the cache_detail while cache_clean()
may still hold a dangling pointer to it. The result is a
use-after-free: cache_dequeue() takes cd->queue_lock on freed memory,
and cache_put() dereferences cd->cache_put as a function pointer from
freed slab.
Drop the list_empty guard so that cancel_delayed_work_sync() always
runs, ensuring any in-flight cache_clean() completes before the
cache_detail is freed. Re-arm the cleaner afterwards if other caches
are still registered. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Cancel reg_work before freeing device on remove
c4iw_uld_state_change() queues reg_work to register the RDMA device.
c4iw_remove() can free ctx->dev while this work is pending or running,
leaving c4iw_register_device() accessing the freed device.
Cancel reg_work before removing the device. The registration work can
tear down ctx->dev when registration fails, so do not unregister or
deallocate it again in that case.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Keep ovs_mutex around
individual CT limit updates, and use the RCU read-side lock while GET
traverses the RCU-protected limit lists.
Netns teardown detaches the RCU-protected CT limit state in the pernet
.pre_exit callback while holding ovs_mutex. The pernet core guarantees an
RCU grace period between the .pre_exit and .exit callbacks, so the .exit
callback completes the teardown without adding any extra synchronization.
The netlink command handlers do not need NULL checks because the userspace
netlink socket holds an active reference to its network namespace while a
request is processed. The per-netns exit path therefore cannot run
concurrently with SET, DEL, or GET for that socket's namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: stop processing a packet once its association is deleted
sctp_endpoint_bh_rcv() looks the association up only when chunk->asoc is
NULL, and caches the result in chunk->asoc and chunk->transport without
taking a reference.
A packet that matches no association is handed to the endpoint, so a peer
can bundle COOKIE ECHO, SHUTDOWN and SHUTDOWN ACK in one packet. The
COOKIE ECHO creates the association, the SHUTDOWN chunk caches it, and
with the outqueue empty the SHUTDOWN ACK reaches sctp_sf_do_9_2_final(),
so the association and its transports are freed.
The endpoint loop has no counterpart to the asoc->base.dead check in
sctp_assoc_bh_rcv(). The next chunk writes to last_time_heard in the freed
transport and is then passed to sctp_do_sm() with the freed association.
The transport is freed through RCU, so this needs the packet to come off
the socket backlog, where the loop runs in task context.
The endpoint loop cannot do the same check: it holds no reference on the
association, so reading asoc->base.dead would itself be a use-after-free.
Mark the packet for discard in the command interpreter, just before it
deletes the association. That is also before sctp_inq_free() releases the
chunk on the association receive path.
sctp_sf_do_5_2_4_dupcook() issues SCTP_CMD_DELETE_TCB for the temporary
association, while the one the packet belongs to stays alive. A restarting
peer can bundle DATA behind its COOKIE ECHO, so compare against
chunk->asoc and leave that case alone. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: drop a chunk if its transport was removed
sctp_rcv() resolves the transport once per packet and leaves it in
chunk->transport. The lookup reference, or the one sctp_add_backlog() takes
if the socket is owned by userspace, keeps it around until the chunk has
been processed.
An authenticated ASCONF DEL-IP can remove it in the meantime.
sctp_assoc_rm_peer() takes the transport out of the association and calls
sctp_transport_free(), which tags it dead and drops the reference the
association held. There is a window on both paths: the packet can sit on
the socket backlog, and on the direct path the lookup completes before
bh_lock_sock().
The DATA chunk in that packet puts the removed transport back into
asoc->peer.last_data_from. Once the packet is done that reference goes
away and the transport is freed by RCU, so the next delayed SACK carries
the pointer into the SACK chunk and sctp_outq_select_transport() reads the
freed transport's state.
Drop the chunk in sctp_inq_push(), next to the existing rcvr->dead check.
Both paths reach it with the association's socket lock held. The peer
retransmits it. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
if (dev->priv_destructor)
dev->priv_destructor(dev); /* slip_devs[i] = NULL */
if (dev->needs_free_netdev)
free_netdev(dev);
...
/* Free network device */
kobject_put(&dev->dev.kobj);
So rtnl_lock() does not serialise slip_open() against the teardown at
all. sl_sync() can load slip_devs[i] while the entry is still published
and dereference it after netdev_run_todo() has run the destructor and
released the device:
CPU0 (slip_open) CPU1 (slip_close)
unregister_netdev()
rtnl_unlock()
netdev_run_todo()
__rtnl_unlock()
rtnl_lock()
sl_sync()
dev = slip_devs[i]
priv_destructor(dev)
slip_devs[i] = NULL
kobject_put(&dev->dev.kobj)
/* dev is freed */
sl = netdev_priv(dev)
if (sl->tty || sl->leased) /* use-after-free */
BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline]
BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506
CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
sl_sync drivers/net/slip/slip.c:730 [inline]
slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
tiocsetd drivers/tty/tty_io.c:2428 [inline]
tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712
Allocated by task 6502:
alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719
sl_alloc drivers/net/slip/slip.c:756 [inline]
slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
Freed by task 6497:
device_release+0xa2/0x240 drivers/base/core.c:2507
kobject_put+0x179/0x280 lib/kobject.c:729
netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509
slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906
tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456
tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614
tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782
tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860
Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed
a different source of stale entries - a device left in slip_devs[] after
slip_open() freed it on the registration error path - and does not
address this race, which is why the report survives it.
Drop the entry from ndo_uninit instead. unregister_netdevice() calls
ndo_uninit under RTNL, before the device is queued to netdev_run_todo(),
so an entry that sl_sync() can still see while holding RTNL belongs to a
device that cannot be freed until RTNL is dropped. sl_free_netdev()
stays only for the slip_open() error path, where register_netdevice()
may have failed before ndo_init and ndo_uninit is then not called
either. Both running for the same device is harmless: the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix flow mask use-after-free on flow deletion
The commit in the Fixes tag below made so flow->mask free is scheduled
via RCU right after it is removed from the flow table. The pointer
stays in the flow structure and it can be accessible while in the same
RCU critical section. This is done to avoid requiring ovs_mutex for
the ovs_flow_free().
However, while removing the flow during processing of CMD_DEL, we do
not take RCU read lock before the removal, and ovs_flow_cmd_fill_info()
uses the flow->mask pointer afterwards. The RCU read lock is taken,
but it's already late at that point. The comment on that line
acknowledges that the lock is cosmetic and doesn't serve a real purpose.
This leads to use-after-free if the RCU grace period passes between
removal and the filling. It is a short race window, but it is there
and can lead to a real crash in case memory allocation for the info
takes a bit longer:
BUG: KASAN: slab-use-after-free in __ovs_nla_put_key
net/openvswitch/flow_netlink.c:1996
BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30
net/openvswitch/flow_netlink.c:2250
Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487
Call Trace:
<TASK>
__ovs_nla_put_key net/openvswitch/flow_netlink.c:1996
ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250
ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930
ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
</TASK>
Allocated by task 9487:
mask_alloc net/openvswitch/flow_table.c:967
flow_mask_insert net/openvswitch/flow_table.c:1012
ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084
ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
Freed by task 9485:
rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645
rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622
...
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062
ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info()
to avoid this race. This also helps with cleaning up the forced cast
and the cosmetic RCU read lock. Before the commit in the Fixes tag the
order did not matter as long as the flow object itself was not freed.
A wider RCU critical section could be another option, but we have a
GFP_KERNEL allocation in the way.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free in smc_rx_pipe_buf_release()
smc_rx_splice() hands RMB pages to a pipe and takes a socket reference
per entry so the smc_sock stays alive until the reader finishes. The
connection does not: a concurrent close runs smc_conn_free(), which
releases the receive buffer back to the link group pool.
smc_rx_pipe_buf_release() tests sk_state before taking the socket lock.
The state can change between the test and the lock, and
smc_rx_update_cons() then dereferences conn->rmb_desc and walks
conn->lgr, which smc_conn_free() has already released. On the
is_reg_err path smcr_buf_unuse() frees the descriptor outright, so
this is a use-after-free.
Take the socket lock first and test conn->freed instead.
smc_conn_free() sets that flag before releasing anything, and every
caller holds the socket lock. The two paths exclude each other: either
the pipe release runs first with everything valid, or it sees the flag
and skips the update. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: clear the URB pointers on disconnect
bcd2000_free_usb_related_resources() frees both URBs and leaves the
pointers behind:
usb_kill_urb(bcd2k->midi_out_urb);
usb_kill_urb(bcd2k->midi_in_urb);
usb_free_urb(bcd2k->midi_out_urb);
usb_free_urb(bcd2k->midi_in_urb);
The rawmidi device outlives that call. A substream that is still open
when the device is unplugged reaches bcd2000_midi_send() from the
trigger path on close. That function writes to the freed URB and then
hands it to the USB core:
bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE;
...
ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC);
usb_kill_urb() does not stop a later submission either, so a submit that
races the disconnect can requeue the URB after it has been reaped.
midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits
it from the completion handler.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000]
Write of size 4 at addr ffff00001827d388 by task bpoc/168
__asan_store4
bcd2000_midi_send [snd_bcd2000]
bcd2000_midi_output_trigger [snd_bcd2000]
snd_rawmidi_kernel_write1
close_substream.part.0
Freed by task 168:
usb_free_urb
bcd2000_disconnect [snd_bcd2000]
BUG: KASAN: slab-use-after-free in usb_submit_urb
Read of size 8 at addr ffff00001827d3b8 by task bpoc/168
Clear both pointers after freeing and test them on the paths that can
still run. Poison the URBs before freeing them: usb_poison_urb() waits
for a running completion handler and rejects any later submission, so
after it returns the input path is quiesced and only the rawmidi trigger
path can still reach bcd2000_midi_send(). No unpoison is needed; the
URBs are freed on the next line.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: wake linked drain waiters on unlink
snd_pcm_drain() on a linked stream parks an on-stack wait entry on the
drained peer's runtime->sleep, and after schedule_timeout() removes it
only if that peer is still found in the caller's group. If group
membership changes during the wait and the sleep ends by signal or
timeout (so autoremove_wake_function() does not run), finish_wait() is
skipped and snd_pcm_drain() returns with the entry still queued on that
stream's sleep list; a later wake_up() then walks a freed stack frame.
This is reachable by unlinking either the drained or the draining stream.
Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()),
snd_pcm_unlink() never wakes the sleep queues. Wake every group member
under the group lock before the membership change, so a linked drainer is
released and drops its entry while the streams are still grouped.
The window was opened when snd_pcm_link_rwsem stopped being held across
the wait and the removal became conditional on group membership (see
Fixes). The later switch to finish_wait() kept that conditional removal,
so the signal/timeout case remained. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: do not propagate one-packet flag to synced conns
Synced connections can be created before their destination exists. When
the destination is later added, ip_vs_bind_dest() copies connection flags
from the destination into cp->flags.
IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced
connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed,
expiry can treat it as a one-packet connection and skip unlinking the
existing conn_tab node, leaving stale hash nodes pointing at a freed
struct ip_vs_conn.
Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced
connections. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: re-fetch eth header after route_shortcircuit()
Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb).
Inside route_shortcircuit(), pskb_may_pull() can be called, which may
reallocate skb->head.
In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to
freed memory, leading to a use-after-free when dereferencing eth->h_dest.
Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit(). |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix NAPI leak in XDP enable error path
During XDP enablement in veth, if xdp_rxq_info_reg() or
xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes.
However, the rollback loop:
for (i--; i >= start; i--) {
decrements the loop index 'i' before the first iteration. This
correctly skips unregistering the rxq for the failed index 'i' (as
registration failed or was already cleaned up), but it also
erroneously skips calling netif_napi_deli() for rq[i].xdp_napi.
Since netif_napi_add() was already called for index 'i', this leaves
a dangling napi_struct in the device's napi_list. When the veth
device is later destroyed, the freed queue memory (which contains the
leaked NAPI structure) can be reused.
The subsequent device teardown iterates the NAPI list and
corrupts the reallocated memory, leading to UAF.
Fix this by explicitly deleting the NAPI association for the failed
index 'i' before rolling back the successfully configured queues. |
