| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. The Rust implementation of the Yamux stream multiplexer uses a vector for pending frames. This vector is not bounded in length. Every time the Yamux protocol requires sending of a new frame, this frame gets appended to this vector. This can be remotely triggered in a number of ways, for example by: 1. Opening a new libp2p Identify stream. This causes the node to send its Identify message. Of course, every other protocol that causes the sending of data also works. The larger the response, the more data is enqueued. 2. Sending a Yamux Ping frame. This causes a Pong frame to be enqueued. Under normal circumstances, this queue of pending frames would be drained once they’re sent out over the network. However, the attacker can use TCP’s receive window mechanism to prevent the victim from sending out any data: By not reading from the TCP connection, the receive window will never be increased, and the victim won’t be able to send out any new data (this is how TCP implements backpressure). Once this happens, Yamux’s queue of pending frames will start growing indefinitely. The queue will only be drained once the underlying TCP connection is closed. An attacker can cause a remote node to run out of memory, which will result in the corresponding process getting terminated by the operating system.
|
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to 3.5.0 and 2.19.5, checking name constraints in X.509 certificates is quadratic in the number of names and name constraints. An attacker who presented a certificate chain which contained a very large number of names in the SubjectAlternativeName, signed by a CA certificate which contained a large number of name constraints, could cause a denial of service. The problem has been addressed in Botan 3.5.0 and a partial backport has also been applied and is included in Botan 2.19.5. |
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to versions 3.3.0 and 2.19.4, an attacker could present an ECDSA X.509 certificate using explicit encoding where the parameters are very large. The proof of concept used a 16Kbit prime for this purpose. When parsing, the parameter is checked to be prime, causing excessive computation. This was patched in 2.19.4 and 3.3.0 to allow the prime parameter of the elliptic curve to be at most 521 bits. No known workarounds are available. Note that support for explicit encoding of elliptic curve parameters is deprecated in Botan. |
| An issue in taurusxin ncmdump v1.3.2 allows attackers to cause a Denial of Service (DoS) via memory exhaustion by supplying a crafted .ncm file |
| ** DISPUTED ** A vulnerability classified as problematic has been found in Tuya SDK up to 5.0.x. Affected is an unknown function of the component MQTT Packet Handler. The manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. Upgrading to version 5.1.0 is able to address this issue. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-260604. NOTE: The vendor explains that a malicious actor would have to crack TLS first or use a legitimate login to initiate the attack. |
| ws is an open source WebSocket client and server for Node.js. A request with a number of headers exceeding theserver.maxHeadersCount threshold could be used to crash a ws server. The vulnerability was fixed in ws@8.17.1 (e55e510) and backported to ws@7.5.10 (22c2876), ws@6.2.3 (eeb76d3), and ws@5.2.4 (4abd8f6). In vulnerable versions of ws, the issue can be mitigated in the following ways: 1. Reduce the maximum allowed length of the request headers using the --max-http-header-size=size and/or the maxHeaderSize options so that no more headers than the server.maxHeadersCount limit can be sent. 2. Set server.maxHeadersCount to 0 so that no limit is applied. |
| Minder is an open source Software Supply Chain Security Platform. Minder's Git provider is vulnerable to a denial of service from a maliciously configured GitHub repository. The Git provider clones users repositories using the `github.com/go-git/go-git/v5` library on lines `L55-L89`. The Git provider does the following on the lines `L56-L62`. First, it sets the `CloneOptions`, specifying the url, the depth etc. It then validates the options. It then sets up an in-memory filesystem, to which it clones and Finally, it clones the repository. The `(g *Git) Clone()` method is vulnerable to a DoS attack: A Minder user can instruct Minder to clone a large repository which will exhaust memory and crash the Minder server. The root cause of this vulnerability is a combination of the following conditions: 1. Users can control the Git URL which Minder clones, 2. Minder does not enforce a size limit to the repository, 3. Minder clones the entire repository into memory. This issue has been addressed in commit `7979b43` which has been included in release version v0.0.52. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Rustix is a set of safe Rust bindings to POSIX-ish APIs. When using `rustix::fs::Dir` using the `linux_raw` backend, it's possible for the iterator to "get stuck" when an IO error is encountered. Combined with a memory over-allocation issue in `rustix::fs::Dir::read_more`, this can cause quick and unbounded memory explosion (gigabytes in a few seconds if used on a hot path) and eventually lead to an OOM crash of the application. The symptoms were initially discovered in https://github.com/imsnif/bandwhich/issues/284. That post has lots of details of our investigation. Full details can be read on the GHSA-c827-hfw6-qwvm repo advisory. If a program tries to access a directory with its file descriptor after the file has been unlinked (or any other action that leaves the `Dir` iterator in the stuck state), and the implementation does not break after seeing an error, it can cause a memory explosion. As an example, Linux's various virtual file systems (e.g. `/proc`, `/sys`) can contain directories that spontaneously pop in and out of existence. Attempting to iterate over them using `rustix::fs::Dir` directly or indirectly (e.g. with the `procfs` crate) can trigger this fault condition if the implementation decides to continue on errors. An attacker knowledgeable about the implementation details of a vulnerable target can therefore try to trigger this fault condition via any one or a combination of several available APIs. If successful, the application host will quickly run out of memory, after which the application will likely be terminated by an OOM killer, leading to denial of service. This issue has been addressed in release versions 0.35.15, 0.36.16, 0.37.25, and 0.38.19. Users are advised to upgrade. There are no known workarounds for this issue. |
| Redis through 8.0.3 allows memory consumption via a multi-bulk command composed of many bulks, sent by an authenticated user. This occurs because the server allocates memory for the command arguments of every bulk, even when the command is skipped because of insufficient permissions. NOTE: this is disputed by the Supplier because abuse of the commands network protocol is not a violation of the Redis Security Model. |
| ImageSharp is a 2D graphics library. In versions below 2.1.11 and 3.0.0 through 3.1.10, a specially crafted GIF file containing a malformed comment extension block (with a missing block terminator) can cause the ImageSharp GIF decoder to enter an infinite loop while attempting to skip the block. This leads to a denial of service. Applications processing untrusted GIF input should upgrade to a patched version. This issue is fixed in versions 2.1.11 and 3.1.11. |
| The YouDao plugin for StarDict, as used in stardict 3.0.7+git20220909+dfsg-6 in Debian trixie and elsewhere, sends an X11 selection to the dict.youdao.com and dict.cn servers via cleartext HTTP. |
| Gladys Assistant before 4.45.1 allows Privilege Escalation (a user changing their own role) because req.body.role can be used in updateMySelf in server/api/controllers/user.controller.js. |
| A vulnerability in the PROFINET stack implementation of the IndraDrive (all versions) of Bosch Rexroth allows an attacker to cause a denial of service, rendering the device unresponsive by sending arbitrary UDP messages. |
| On affected platforms running Arista EOS with OSPFv3 configured, a specially crafted packet can cause the OSFPv3 process to have high CPU utilization which may result in the OSFPv3 process being restarted. This may cause disruption in the OSFPv3 routes on the switch.
This issue was discovered internally by Arista and is not aware of any malicious uses of this issue in customer networks. |
| A vulnerability has been found in INSTAR 2K+ and 4K 3.11.1 Build 1124. This vulnerability affects unknown code of the component Backend IPC Server. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Querying for records within a specially crafted zone containing certain malformed DNSKEY records can lead to CPU exhaustion.
This issue affects BIND 9 versions 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1. |
| A mismatch caused by client-triggered server-sent stream resets between HTTP/2 specifications and the internal architectures of some HTTP/2 implementations may result in excessive server resource consumption leading to denial-of-service (DoS). By opening streams and then rapidly triggering the server to reset them—using malformed frames or flow control errors—an attacker can exploit incorrect stream accounting. Streams reset by the server are considered closed at the protocol level, even though backend processing continues. This allows a client to cause the server to handle an unbounded number of concurrent streams on a single connection. This CVE will be updated as affected product details are released. |
| A vulnerability was found in chinese-poetry 0.1. It has been rated as problematic. This issue affects some unknown processing of the file rank/server.js. The manipulation leads to inefficient regular expression complexity. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| An issue in mquickjs before commit 74b7e (2026-01-15) allows a local attacker to cause a denial of service via a crafted file to the get_mblock_size function at mquickjs.c. |
| Marshmallow is a lightweight library for converting complex objects to and from simple Python datatypes. In versions from 3.0.0rc1 to before 3.26.2 and from 4.0.0 to before 4.1.2, Schema.load(data, many=True) is vulnerable to denial of service attacks. A moderately sized request can consume a disproportionate amount of CPU time. This issue has been patched in version 3.26.2 and 4.1.2. |
