| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw in Node.js `crypto` causes the internal entropy caches used by `crypto.randomUUID()`, `crypto.randomUUIDv7()`, and `crypto.randomInt()` to be saved into user-land startup snapshots (`--build-snapshot`) and single executable applications built with `useSnapshot`.
If any of these functions, or an API that relies on them such as `URL.createObjectURL()`, is called while the snapshot is built, every process started from that snapshot returns the same values until the cache is refilled: up to 127 UUIDs and about 1,000 `randomInt()` values. Identifiers expected to be unique can collide across processes, and values issued by one process can be predicted by observing another.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**. |
| A flaw in Node.js TLS hostname verification can cause a server certificate to be validated against a different IP address than the one the client connected to, when the host is a non-canonical IPv4 literal with a leading zero, such as `0127.0.0.1`.
`tls.checkServerIdentity()` normalizes the host following the WHATWG URL rules, which read a leading-zero octet as octal (`0127.0.0.1` becomes `87.0.0.1`), while the connection is made through the operating system resolver, which on some platforms such as macOS reads it as decimal (`127.0.0.1`). A server at the connected address can then be authenticated with a certificate issued for another IP address.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: account non-AQL frames per peer rather than per link
The driver increments wcid->non_aql_packets when a frame goes to the
hardware queue. The completion path decrements the counter again.
For an MLO peer, the hardware reports the completion on the link that it
used for the transmission. This link can differ from the link that the
driver queued the frame on. In that case, the increment and the
decrement go to different link wcids, and the count drifts upwards until
it blocks the station.
Keep the count on the wcid of the primary link, like the other peer-wide
state. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: unlock inode and extent in caller when io_uring read extent fails
btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken
the inode shared lock and the extent lock. On failure it used to unlock
in out_fail, and a pages-array allocation failure returned -ENOMEM
without unlocking at all.
Unlock in the caller instead on all failure returns, matching the
copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks
in btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio
If all bios finish before btrfs_encoded_read_regular_fill_pages()
returns, it calls btrfs_uring_read_extent_endio() and previously
returned the I/O status. A negative errno then made
btrfs_uring_read_extent() unlock and free while
btrfs_uring_read_finished() did the same again.
Return -EIOCBQUEUED so only the deferred path cleans up. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix the program leak when XDP is replaced
We need to release the reference on the old BPF prog, whether
we are going to no-prog, or replacing the prog with another.
Spotted by AI while running tests for the propagation series
(leaked programs were accumulating). Selftest will come in
the net-next series to avoid conflicts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Free the BO cache size list on teardown
vc4_bo_cache_destroy() purges the cached BOs but never frees the size
list, leaking it on every unbind. |
| Integer overflow or wraparound in Windows iSCSI allows an unauthorized attacker to execute code over a network. |
| Key exchange without entity authentication in the EMR SSH helper commands in Amazon AWS CLI before 1.45.28 and AWS CLI v2 before 2.35.3 might allow man-in-the-middle attackers to intercept SSHsessions and file transfers via network positioning between the client and the EMR cluster endpoint.
To remediate this issue, users should upgrade to AWS CLI v1 1.45.28 or later, or AWS CLI v2 2.35.3 or later. |
| Overly permissive file permissions in AWS CLI before 1.44.78 (v1) and 2.34.29 (v2) on Unix-like systems where the umask has not been configured to restrict file permissions (the default on most systems) may allow other local users on the same host to read credentials written by certain CLI subcommands (aws codeartifact login, aws iam create-virtual-mfa-device, aws deploy register).
To remediate this issue, users should upgrade to AWS CLI 1.44.78 (v1) or 2.34.29 (v2) or later. |
| Server-side request forgery in the model download path in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to send requests to internal network destinations via a crafted model URL.
Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution. |
| Relative path traversal during model archive extraction in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to execute arbitrary code via a crafted model archive.
Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution. |
| Visual Studio Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: use vb2_video_unregister_device on driver removal
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix UAF in ovl_do_mkdir() debug print
ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir().
Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on
failure."), vfs_mkdir() calls end_creating() on the input dentry on
failure and may replace it on success, so the post-call %pd can
use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled.
Print the dentry before the call and only the result afterward. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak
The struct rtc_wkalrm has padding holes after the 'pending' member.
When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized
kernel stack data residing in these holes may be leaked.
Zero-initialize the struct at declaration to eliminate this information
leak risk.
Fixes smatch warnings:
- drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't
leak information (struct has a hole after 'pending') |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: reset ar->num_stations on hardware start
When (multiple) hw restart occurs, we end up in a situation where we
cannot accept new stations / mesh peers. This seems to be the
'num_stations' in 'struct ath11k' that did not get reset properly in
this case. In ath11k_mac_op_start(), it was indeed the only accounting var
that did not get reset so let's clear it too.
This avoids problems like those:
[1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0
[1248828.088115] Call trace:
[1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P)
[1248828.088119] ieee80211_reconfig+0x774/0x1438
[1248828.088123] ieee80211_restart_work+0x10c/0x178
[1248828.088127] process_one_work+0x178/0x3c0
[1248828.088130] worker_thread+0x280/0x440
[1248828.088133] kthread+0xe0/0xf8
[1248828.088137] ret_from_fork+0x10/0x20
[1248828.088141] ---[ end trace 0000000000000000 ]---
[1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)
[1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: lpass-cpu: use DAI table index for playback constraints
The DAI ID is a hardware port ID and is not necessarily the index of
the corresponding entry in variant->dai_driver.
When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code
currently uses dai_id to index variant->dai_driver. This is incorrect
for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S
DAI has ID 4 while it is the only entry in the DAI driver table. If
that DAI is configured for QUAD01 and probe reaches this branch, the
code writes beyond that single entry via dai_driver[4] instead of
updating the DAI being processed.
Use the loop index i when updating the current DAI's playback channel
constraints, while retaining dai_id for indexing the hardware-port
specific playback SD-line mode array.
This fixes the incorrect DAI table access for platforms where the DAI
ID does not match its position in the driver table. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check a submount for references right before unmounting it
shrink_submounts() and mark_mounts_for_expiry() first collect all the
mounts they are allowed to unmount and then unmount them.
Whether a mount is busy is decided by propagate_mount_busy() on the
tree. But unmounting the first mount changes the tree that the second
one propagates into. propagate_umount()
moves a surviving overmount off a copy it unmounts and mounts it where
the copy was mounted. If that's where the propagated copy of the second
victim is looked up the overmount becomes a candidate of the second
umount_tree(). It's childless and so trim_one() commits it without
looking at its reference count.
So a synchronous umount pulls out a busy mount that is in use somewhere
else and marks it MNT_SYNC_UMOUNT while it has users:
umount2(/tmp/plshrink/p1, 0) = 0 errno 0
cwd is (unreachable)
The same two umounts requested one after the other fail with EBUSY.
This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of
NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts
inherit the flag.
Check each mount right before it is unmounted under the same hold of
namespace_sem and mount_lock as the umount itself. Make sure that the
algorithm stays linear. |
