| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| VOCALOID6 Editor provided by Yamaha Corporation improperly restricts XML external entity references. Loading a specially crafted project file may the product to initiate unintended communication, potentially leading to the leak of sensitive information from the device where the product is installed or resulting in a denial-of-service (DoS) condition. |
| @fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie. |
| Netskope is notified about a potential gap in its agent (NSClient) where a system with Netskope Client while connecting to an access point with Captive Portal switches to a Network which already has internet connectivity, the Captive Portal does not close. This allows the possibility of abuse via the Captive Portal using a rogue access point to either access malicious sites or exfiltrate data.The issue impacts all versions prior to R142 |
| IBM Cyber Fraud 1.0.0 through 1.0.2 has a missing secure attribute allowing sensitive cookies to be transmitted over unencrypted connections, potentially enabling an attacker to intercept session data through network-based attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Don't WARN on kthread_run failure.
Since __kthread_create_on_node() returns -EINTR upon SIGKILL,
we should not use WARN_ON() in order to catch kthread_run() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject legacy packet loads from callbacks
check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a
subprogram as an implicit return with R0 set to zero. It calls
prepare_func_exit() to explore this synthesized path.
When the load is reached directly from a synchronous callback,
prepare_func_exit() enforces the callback return contract and marks R0
precise. R0 is not derived from a real instruction on this path, so
precision backtracking reaches the callback call with R0 still requested
and triggers the "callback unexpected regs" verifier bug. A privileged
program loader can therefore cause a verifier warning and an -EFAULT
BPF_PROG_LOAD.
These legacy packet-load instructions are deprecated. Reject them from
callbacks rather than complicating their implicit-return model. Check all
active frames before constructing the implicit return so nested static
subprograms cannot hide the callback context.
Global functions are verified independently with a fresh frame zero, so
an active-frame check cannot identify a global function called from a
callback. Also check the complete subprogram call graph during stack-depth
validation and reject a function containing a legacy load when any caller
is a callback. This covers global and static descendants without making
has_ld_abs transitive, preserving its per-function BTF return-type check.
Ordinary uses outside callbacks remain supported. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
A NULL pointer dereference in klist_put() occurs when a child device (such
as a BNEP network device in bnep_session) is concurrently being
unregistered while hci_conn_del_sysfs() reparents child devices.
This is caused by a race condition between hci_conn_del_sysfs() and
concurrent child device unregistration (e.g. bnep_session calling
unregister_netdev()). During device unregistration, device_del() snapshots
a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the
child device using device_find_any_child() and calls device_move() to
reparent it to NULL, which removes the node from its parent's klist and
clears knode_parent. Subsequently, device_del() calls
klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing
klist_put() to dereference knode_klist(n)->put on an already removed node,
resulting in a NULL pointer dereference.
This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix
use-after-free in device_for_each_child()"), which replaced
device_find_child(..., __match_tty) with device_find_any_child() in
hci_conn_del_sysfs(). That change was intended to avoid a use-after-free
where conn->dev outlived its parent hdev->dev when child devices held
references to conn->dev, because conn->dev only held a reference to
hdev->dev while registered in sysfs.
Fix the issue properly by taking an explicit reference to the parent device
with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with
put_device(parent) in bt_link_release() when the conn device is freed. This
ensures that hdev->dev remains valid for the entire lifecycle of conn->dev,
resolving the underlying use-after-free. With the parent reference held
properly, restore the __match_tty filter in hci_conn_del_sysfs() so that
device_move() is only invoked on persistent RFCOMM TTY devices as
originally intended, eliminating the race condition with unregistering
network devices. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor vnic reporter to eswitch devlink port
The representor vnic devlink health reporter is created and destroyed
along the representor netdev (un)load path, which is not serialized by
the devlink instance lock. Destroying the reporter from there triggers
a devl_assert_locked() splat on driver unbind:
WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758
Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ...
CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ...
RIP: 0010:devl_assert_locked+0x54/0x70
Call Trace:
<TASK>
devl_health_reporter_destroy+0x3a/0x1b0
mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core]
? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core]
? kernfs_remove_by_name_ns+0xc3/0xf0
device_release_driver_internal+0x3b2/0x560
unbind_store+0xce/0xf0
Move the reporter's lifecycle to the eswitch devlink port (un)register
paths, which are already serialized by the devlink instance lock, and
store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the
reporter priv since the diagnose callback only needs a device handle and
a vport number, and mlx5_vport carries both and is initialized before
any representor driver probes. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: accurately adjust free_sections during free_segment_range
In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs`
to restrict block allocation to the safe remaining main area while valid
blocks in the truncated range are evacuated by GC.
However, FREE_I(sbi)->free_sections tracks the total number of free
sections across the whole filesystem. If any sections within the
truncated range were already free upon entering free_segment_range(),
failing to deduct them from free_sections causes the filesystem to
overestimate available free sections in the active, reduced main area.
This leads to inconsistent free section accounting during GC data
migration and can trigger unexpected allocation failures or assertion
errors when space is tight.
Fix this by calculating the number of already-free sections in the
truncated range, deducting them from free_sections upon entering
free_segment_range(), and restoring them on exit. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: replace forgeable discard filler with a keyed sector marker
The discard-block check in dm_integrity_rw_tag() treats a stored tag
of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and
skips HMAC verification. allow_discards is only accepted in
dm-integrity's standalone mode. An attacker with raw write access to
the backing device, but without the integrity key, can stamp any block
with an all-0xf6 tag and have it served as authentic.
Add a new "allow_discards_keyed" target argument that marks discarded
blocks with a keyed checksum of (salt || sector) instead, computed by
integrity_discard_checksum(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ptp: don't WARN when controlling PF is unavailable
In VFIO passthrough setups, it is possible to pass through only a PF
which doesn't own the source timer. In that case the PTP controlling PF
(adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp()
returns NULL and triggers WARN_ON() in ice_ptp_setup_pf().
Since this is an expected behavior in that configuration, replace
WARN_ON() with an informational message and return -EOPNOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()
There is no need to BUG(), we can just return an error and log an error
message. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: XML). Supported versions that are affected are MySQL Server: 8.4.0-8.4.12, 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 8.0.0-8.0.49, 8.4.0-8.4.12, 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all MySQL Server, MySQL Cluster accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 6.5 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:H). |
