| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: keep DMA buffers required for suspend/resume
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: amdtee: fix race condition in amdtee_open_session
There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:
sess->session_info[i] = session_info;
if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().
The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
hsr: Remove WARN_ONCE() in hsr_addr_is_self().
syzbot reported the warning [0] in hsr_addr_is_self(),
whose assumption is simply wrong.
hsr->self_node is cleared in hsr_del_self_node(), which
is called from hsr_dellink().
Since dev->rtnl_link_ops->dellink() is called before
unregister_netdevice_many(), there is a window when
user can find the device but without hsr->self_node.
Let's remove WARN_ONCE() in hsr_addr_is_self().
[0]:
HSR: No self node
WARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220
Modules linked in:
CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39
Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96
RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283
RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000
RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000
R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000
FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0
DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002
DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
check_local_dest net/hsr/hsr_forward.c:592 [inline]
fill_frame_info net/hsr/hsr_forward.c:728 [inline]
hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739
hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236
__netdev_start_xmit include/linux/netdevice.h:5368 [inline]
netdev_start_xmit include/linux/netdevice.h:5377 [inline]
xmit_one net/core/dev.c:3888 [inline]
dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904
__dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870
neigh_output include/net/neighbour.h:556 [inline]
ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237
ip_send_skb net/ipv4/ip_output.c:1510 [inline]
ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530
raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698
___sys_sendmsg+0x2a5/0x360 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f6feb62ce59
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59
RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004
RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally. |
| A security flaw has been discovered in BerriAI litellm up to 1.82.2. This impacts the function authenticate_user of the file litellm/proxy/auth/login_utils.py of the component PROXY_ADMIN database API Key Generator. Performing a manipulation results in session expiration. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: fix unclocked access on unbind
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Stop job scheduling across aie2_release_resource()
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl: fix controller deregistration
Make sure to deregister the controller before releasing underlying
resources like DMA during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: rspi: fix controller deregistration
Make sure to deregister the controller before releasing underlying
resources like DMA during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: fix use-after-free in scpsys_get_bus_protection_legacy()
In scpsys_get_bus_protection_legacy(), of_find_node_with_property()
returns a device node with its reference count incremented. The function
then calls of_node_put(node) before checking whether
syscon_regmap_lookup_by_phandle() returns an error. If an error occurs,
dev_err_probe() dereferences the node pointer to print diagnostic
information, but the node memory may have already been freed due to the
earlier of_node_put(), leading to a use-after-free vulnerability.
Fix this by moving the of_node_put() call after the error check, ensuring
the node is still valid when accessed in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when
interrupted. This needs to abort the URB and return an error. No data
has been received from the device so any reads from the transfer
buffer are invalid.
The original code tests !ret, which only catches the timeout case (0).
On signal delivery (-ERESTARTSYS), !ret is false so the function skips
usb_kill_urb() and falls through to read from the unfilled transfer
buffer.
Fix by capturing the return value into a long (matching the function
return type) and handling signal (negative) and timeout (zero) cases
with separate checks that both call usb_kill_urb() before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc, perf: Check that current->mm is alive before getting user callchain
It may happen that mm is already released, which leads to kernel panic.
This adds the NULL check for current->mm, similarly to
commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain").
I was getting this panic when running a profiling BPF program
(profile.py from bcc-tools):
[26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0)
[26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588
[26215.051952] Faulting instruction address: 0xc00000000020fac0
[26215.051957] Oops: Kernel access of bad area, sig: 11 [#1]
[...]
[26215.052049] Call Trace:
[26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable)
[26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30
[26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360
[26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0
[26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274
[...]
In addition, move storing the top-level stack entry to generic
perf_callchain_user to make sure the top-evel entry is always captured,
even if current->mm is NULL.
[Maddy: fixed message to avoid checkpatch format style error] |
| XZ Utils provide a general-purpose data-compression library plus command-line tools. In XZ Utils 5.3.3alpha to 5.8.0, the multithreaded .xz decoder in liblzma has a bug where invalid input can at least result in a crash. The effects include heap use after free and writing to an address based on the null pointer plus an offset. Applications and libraries that use the lzma_stream_decoder_mt function are affected. The bug has been fixed in XZ Utils 5.8.1, and the fix has been committed to the v5.4, v5.6, v5.8, and master branches in the xz Git repository. No new release packages will be made from the old stable branches, but a standalone patch is available that applies to all affected releases. |
| Squid is a caching proxy for the Web. Prior to version 7.5, due to premature release of resource during expected lifetime and heap Use-After-Free bugs, Squid is vulnerable to Denial of Service when handling ICP traffic. This problem allows a remote attacker to perform a reliable and repeatable Denial of Service attack against the Squid service using ICP protocol. This attack is limited to Squid deployments that explicitly enable ICP support (i.e. configure non-zero `icp_port`). This problem _cannot_ be mitigated by denying ICP queries using `icp_access` rules. This bug is fixed in Squid version 7.5. |
| In wxWidgets before 3.2.7, a crash can be triggered in wxWidgets apps when connections are refused in wxWebRequestCURL. |
| Squid is a caching proxy for the Web. Prior to version 7.5, due to heap Use-After-Free, Squid is vulnerable to Denial of Service when handling ICP traffic. This problem allows a remote attacker to perform a reliable and repeatable Denial of Service attack against the Squid service using ICP protocol. This attack is limited to Squid deployments that explicitly enable ICP support (i.e. configure non-zero `icp_port`). This problem _cannot_ be mitigated by denying ICP queries using `icp_access` rules. Version 7.5 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: wdm: close race between wdm_open and wdm_wwan_port_stop
Clearing WDM_WWAN_IN_USE must be the last action or
we can open a chardev whose URBs are still poisoned |
| hostapd fails to process crafted RADIUS packets properly. When hostapd authenticates wi-fi devices with RADIUS authentication, an attacker in the position between the hostapd and the RADIUS server may inject crafted RADIUS packets and force RADIUS authentications to fail. |
| Consul and Consul Enterprise's cluster peering implementation contained a flaw whereby a peer cluster with service of the same name as a local service could corrupt Consul state, resulting in denial of service. This vulnerability was resolved in Consul 1.14.5, and 1.15.3 |
