| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| stats is a macOS system monitor in for the menu bar. The Stats application is vulnerable to a local privilege escalation due to the insecure implementation of its XPC service. The application registers a Mach service under the name `eu.exelban.Stats.SMC.Helper`. The associated binary, eu.exelban.Stats.SMC.Helper, is a privileged helper tool designed to execute actions requiring elevated privileges on behalf of the client, such as setting fan modes, adjusting fan speeds, and executing the `powermetrics` command. The root cause of this vulnerability lies in the `shouldAcceptNewConnection` method, which unconditionally returns YES (or true), allowing any XPC client to connect to the service without any form of verification. As a result, unauthorized clients can establish a connection to the Mach service and invoke methods exposed by the HelperTool interface. An attacker can exploit this vulnerability to modify the hardware settings of the user’s device and execute arbitrary code with root privileges. This issue has been addressed in version 2.11.21 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability has been found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308 and classified as problematic. This vulnerability affects unknown code of the component Domain Handler. The manipulation of the argument Domain Name leads to origin validation error. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. |
| Hickory DNS is a Rust based DNS client, server, and resolver. A vulnerability present starting in version 0.8.0 and prior to versions 0.24.3 and 0.25.0-alpha.5 impacts Hickory DNS users relying on DNSSEC verification in the client library, stub resolver, or recursive resolver. The DNSSEC validation routines treat entire RRsets of DNSKEY records as trusted once they have established trust in only one of the DNSKEYs. As a result, if a zone includes a DNSKEY with a public key that matches a configured trust anchor, all keys in that zone will be trusted to authenticate other records in the zone. There is a second variant of this vulnerability involving DS records, where an authenticated DS record covering one DNSKEY leads to trust in signatures made by an unrelated DNSKEY in the same zone. Versions 0.24.3 and 0.25.0-alpha.5 fix the issue. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 5.0.6, the fast-jwt library does not properly validate the iss claim based on the RFC 7519. The iss (issuer) claim validation within the fast-jwt library permits an array of strings as a valid iss value. This design flaw enables a potential attack where a malicious actor crafts a JWT with an iss claim structured as ['https://attacker-domain/', 'https://valid-iss']. Due to the permissive validation, the JWT will be deemed valid. Furthermore, if the application relies on external libraries like get-jwks that do not independently validate the iss claim, the attacker can leverage this vulnerability to forge a JWT that will be accepted by the victim application. Essentially, the attacker can insert their own domain into the iss array, alongside the legitimate issuer, and bypass the intended security checks. This issue is fixed in 5.0.6. |
| RISC Zero is a general computing platform based on zk-STARKs and the RISC-V microarchitecture. Due to a missing constraint in the rv32im circuit, any 3-register RISC-V instruction (including remu and divu) in risc0-zkvm 2.0.0, 2.0.1, and 2.0.2 are vulnerable to an attack by a malicious prover. The main idea for the attack is to confuse the RISC-V virtual machine into treating the value of the rs1 register as the same as the rs2 register due to a lack of constraints in the rv32im circuit. Rust applications using the risc0-zkvm crate at versions 2.0.0, 2.0.1, and 2.0.2 should upgrade to version 2.1.0. Smart contract applications using the official RISC Zero Verifier Router do not need to take any action: zkVM version 2.1 is active on all official routers, and version 2.0 has been disabled. Smart contract applications not using the verifier router should update their contracts to send verification calls to the 2.1 version of the verifier. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An issue in the firmware update mechanism of Nous W3 Smart WiFi Camera v1.33.50.82 allows unauthenticated and physically proximate attackers to escalate privileges to root via supplying a crafted update.tar archive file stored on a FAT32-formatted SD card. |
| Matrix JavaScript SDK is a Matrix Client-Server SDK for JavaScript and TypeScript. matrix-js-sdk before 38.2.0 has insufficient validation of room predecessor links in MatrixClient::getJoinedRooms, allowing a remote attacker to attempt to replace a tombstoned room with an unrelated attacker-supplied room. The issue has been patched and users should upgrade to 38.2.0. A workaround is to avoid using MatrixClient::getJoinedRooms in favor of getRooms() and filtering upgraded rooms separately. |
| Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1. |
| A vulnerability was determined in Belkin AX1800 1.1.00.016. Affected by this vulnerability is an unknown functionality of the component Firmware Update Handler. This manipulation causes insufficient verification of data authenticity. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Prior to versions 0.25.3 and 0.26.3, by spoofing a webhook payload with a specific set of headers and body data, an attacker could transfer ownership of a repository and its repo level secrets to a separate repository. These secrets could be exfiltrated by follow up builds to the repository. Users with an enabled repository with access to repo level CI secrets in Vela are vulnerable to the exploit, and any user with access to the CI instance and the linked source control manager can perform the exploit. Versions 0.25.3 and 0.26.3 fix the issue. No known workarounds are available. |
| Ceph is a distributed object, block, and file storage platform. In versions 19.2.3 and below, it is possible to send an JWT that has "none" as JWT alg. And by doing so the JWT signature is not checked. The vulnerability is most likely in the RadosGW OIDC provider. As of time of publication, a known patched version has yet to be published. |
| The RegistrationMagic – Custom Registration Forms, User Registration, Payment, and User Login plugin for WordPress is vulnerable to payment bypass due to insufficient verification of data authenticity on the 'process_paypal_sdk_payment' function in all versions up to, and including, 6.0.6.9. This is due to the plugin trusting client-supplied values for payment verification without validating that the payment actually went through PayPal. This makes it possible for unauthenticated attackers to bypass paid registration by manipulating payment status and activating their account without completing a real PayPal payment. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CMSaaSStarter is a SaaS template/boilerplate built with SvelteKit, Tailwind, and Supabase. Any forks of the CMSaaSStarter template before commit 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 are impacted. The issue is the user JWT Token is not verified on server session. You should take the patch 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 into your fork.
|
| An attacker spoofing answers to ECS enabled requests sent out by the Recursor has a chance of success higher than non-ECS enabled queries.
The updated version include various mitigations against spoofing attempts of ECS enabled queries by chaining ECS enabled requests and enforcing stricter validation of the received answers.
The most strict mitigation done when the new setting outgoing.edns_subnet_harden (old style name edns-subnet-harden) is enabled. |
| IEEE P802.11-REVme D1.1 through D7.0 allows FragAttacks against mesh networks. In mesh networks using Wi-Fi Protected Access (WPA, WPA2, or WPA3) or Wired Equivalent Privacy (WEP), an adversary can exploit this vulnerability to inject arbitrary frames towards devices that support receiving non-SSP A-MSDU frames. NOTE: this issue exists because of an incorrect fix for CVE-2020-24588. P802.11-REVme, as of early 2025, is a planned release of the 802.11 standard. |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
