| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| dpanel is an open source server management panel written in Go. In versions 1.2.0 through 1.7.2, dpanel allows authenticated users to read arbitrary files from the server via the /api/app/compose/get-from-uri API endpoint. The vulnerability exists in the GetFromUri function in app/application/http/controller/compose.go, where the uri parameter is passed directly to os.ReadFile without proper validation or access control. A logged-in attacker can exploit this flaw to read sensitive files from the host system, leading to information disclosure. No patched version is available as of this writing. |
| Bugsink is a self-hosted error tracking service. In versions 1.4.2 and below, 1.5.0 through 1.5.4, 1.6.0 through 1.6.3, and 1.7.0 through 1.7.3, ingestion paths construct file locations directly from untrusted event_id input without validation. A specially crafted event_id can result in paths outside the intended directory, potentially allowing file overwrite or creation in arbitrary locations. Submitting such input requires access to a valid DSN, potentially exposing them. If Bugsink runs in a container, the effect is confined to the container’s filesystem. In non-containerized setups, the overwrite may affect other parts of the system accessible to that user. This is fixed in versions 1.4.3, 1.5.5, 1.6.4 and 1.7.4. |
| Improper limitation of a pathname to a restricted directory ('Path Traversal') issue exists in the file deletion process of the USB storage file-sharing function of HGW-BL1500HM Ver 002.002.003 and earlier. If this vulnerability is exploited, an attacker may delete a file on the device or cause a denial of service (DoS) condition. |
| Soft Serve is a self-hostable Git server for the command line. In versions 0.9.1 and below, attackers can create or override arbitrary files with uncontrolled data through its SSH API. This issue is fixed in version 0.10.0. |
| internetarchive is a Python and Command-Line Interface to Archive.org In versions 5.5.0 and below, there is a directory traversal (path traversal) vulnerability in the File.download() method of the internetarchive library. The file.download() method does not properly sanitize user-supplied filenames or validate the final download path. A maliciously crafted filename could contain path traversal sequences (e.g., ../../../../windows/system32/file.txt) or illegal characters that, when processed, would cause the file to be written outside of the intended target directory. An attacker could potentially overwrite critical system files or application configuration files, leading to a denial of service, privilege escalation, or remote code execution, depending on the context in which the library is used. The vulnerability is particularly critical for users on Windows systems, but all operating systems are affected. This issue is fixed in version 5.5.1. |
| auth0-PHP is an SDK for Auth0 Authentication and Management APIs. In versions 3.3.0 through 8.16.0, the Bulk User Import endpoint in applications built with the SDK does not validate the file-path wrapper or value. Without proper validation, affected applications may accept arbitrary file paths or URLs. The vulnerability affects any application that either directly uses the Auth0-PHP SDK (versions 3.3.0–8.16.0) or indirectly relies on those versions through the Auth0/symfony, Auth0/laravel-auth0, or Auth0/wordpress SDKs. This issue is fixed in version 8.17.0. |
| crun is an open source OCI Container Runtime fully written in C. In affected versions A malicious container image could trick the krun handler into escaping the root filesystem, allowing file creation or modification on the host. No special permissions are needed, only the ability for the current user to write to the target file. The problem is fixed in crun 1.20 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| org.gaul S3Proxy implements the S3 API and proxies requests. Users of the filesystem and filesystem-nio2 storage backends could unintentionally expose local files to users. This issue has been addressed in version 2.6.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Jellystat is a free and open source Statistics App for Jellyfin. In affected versions Jellystat is directly using a user input in the route(s). This can lead to Path Traversal Vulnerabilities. Since this functionality is only for admin(s), there is very little scope for abuse. However, the `DELETE` `files/:filename` can be used to delete any file. This issue has been addressed in version 1.1.3. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Dumb Drop is a file upload application. Users with permission to upload to the service are able to exploit a path traversal vulnerability to overwrite arbitrary system files. As the container runs as root by default, there is no limit to what can be overwritten. With this, it's possible to inject malicious payloads into files ran on schedule or upon certain service actions. As the service is not required to run with authentication enabled, this may permit wholly unprivileged users root access. Otherwise, anybody with a PIN. |
| This vulnerability allows authenticated attackers to read an arbitrary file by changing a filepath parameter into an internal system path. |
| astral-tokio-tar is a tar archive reading/writing library for async Rust. In versions 0.5.3 and earlier of astral-tokio-tar, tar archives may extract outside of their intended destination directory when using the Entry::unpack_in_raw API. Additionally, the Entry::allow_external_symlinks control (which defaults to true) could be bypassed via a pair of symlinks that individually point within the destination but combine to point outside of it. These behaviors could be used individually or combined to bypass the intended security control of limiting extraction to the given directory. This in turn would allow an attacker with a malicious tar archive to perform an arbitrary file write and potentially pivot into code execution. This issue has been patched in version 0.5.4. There is no workaround other than upgrading. |
| Improper input sanitization in the file archives upload functionality of Eaton Galileo software allows traversing paths which could lead into an attacker with local access to execute unauthorized code or commands. This security issue has been fixed in the latest version of Galileo which is available on the Eaton download center. |
| ITCube CRM in versions from 2023.2 through 2025.2 is vulnerable to path traversal. Unauthenticated remote attacker is able to exploit vulnerable parameter fileName and construct payloads that allow to download any file accessible by the the web server process. |
| Vulnerability in Wikimedia Foundation CheckUser. This vulnerability is associated with program files src/Api/Rest/Handler/UserInfoHandler.Php.
This issue affects CheckUser: from a3dc1bbcc33acbcca6831d6afaccbb1054c93a57, 0584eb2ad564648aa3ce9c555dd044dda02b55f4. |
| Vulnerability in Wikimedia Foundation CheckUser. This vulnerability is associated with program files src/Services/CheckUserUserInfoCardService.Php.
This issue affects CheckUser: from 7cedd58781d261f110651b6af4f41d2d11ae7309. |
| Vulnerability in Wikimedia Foundation Thanks. This vulnerability is associated with program files includes/ThanksQueryHelper.Php.
This issue affects Thanks: from * before 1.43.4, 1.44.1. |
| Traccar is an open source GPS tracking system. Default installs of Traccar on Windows between versions 6.1- 6.8.1 and non default installs between versions 5.8 - 6.0 are vulnerable to unauthenticated local file inclusion attacks which can lead to leakage of passwords or any file on the file system including the Traccar configuration file. Versions 5.8 - 6.0 are only vulnerable if <entry key='web.override'>./override</entry> is set in the configuration file. Versions 6.1 - 6.8.1 are vulnerable by default as the web override is enabled by default. The vulnerable code is removed in version 6.9.0. |
| A path traversal issue exists in WXR9300BE6P series firmware versions prior to Ver.1.10. Arbitrary file may be altered by an administrative user who logs in to the affected product. Moreover, arbitrary OS command may be executed via some file alteration. |
| The SecureDrop Client is a desktop application for journalists to communicate with sources and work with submissions on the SecureDrop Workstation. Prior to versions 0.14.1 and 1.0.1, an attacker who has already gained code execution in a virtual machine on the SecureDrop Workstation could gain code execution in the `sd-log` virtual machine by sending a specially crafted log entry. The vulnerability is not exploitable remotely and requires an attacker to already have code execution on one of the other virtual machines (VMs) of the system. Due to the Workstation's underlying usage of Qubes for strong isolation, the vulnerability would have allowed lateral movement between any log-enabled VM and the `sd-log` VM, but no further. The SecureDrop workstation collects logs centrally in an isolated virtual machine named `sd-log` for easy export for support and debugging purposes. The `sd-log` VM is completely isolated from the internet and ingests logs via a narrow Qubes RPC policy that allows for specific inter-VM communication via the Xen vchan protocol used by Qubes's qrexec mechanism. A path traversal bug was found in the logic used to choose where to write the log file for a specific VM: the VM name, used unsanitized in the destination path in `sd-log`, is supplied by the logging VM itself instead of being read from a trusted source, such as the Qubes environment variable `QREXEC_REMOTE_DOMAIN` that is used in the fixed implementation. An attacker could provide an arbitrary source VM name, possibly overwriting logs of other VMs, or writing a file named `syslog.log`, with attacker-controlled content, in arbitrary directories as a low-privileged user. A successful attack could potentially overwrite or add configuration to software that loads configuration files from a directory. This is exploitable to achieve code execution by setting the target directory to `/home/user/.config/autostart/` and letting it write `syslog.log`, because XFCE treats any file in that directory as a `.desktop` file regardless of its extension. Versions 0.14.1 and 1.0.1 contain a patch for this issue. |
