| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Bound SW TPA IDs to prevent crashes
FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range
0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for
57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a
software ID which is used to index rxr->rx_tpa, and to generate a mapping
between FW IDs and the wrapped software ID.
On a 57608 with firmware version 233, the firmware advertises 32
concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC
is set to 32.
If the software ID from bnxt_alloc_agg_idx is above 31, this results in
an invalid address being loaded on this line:
tpa_info = &rxr->rx_tpa[agg_id];
because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes
to tpa_info later in the code are out of bounds.
This bug results in a crash at boot:
Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI
RIP: 0010:bnxt_rx_pkt+0xc0/0x1560
RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516
RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0
RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048
R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516
R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680
FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? __netif_receive_skb_list_core+0x1ca/0x250
__bnxt_poll_work+0x152/0x280
bnxt_poll_p5+0x1cd/0x480
__napi_poll+0x30/0x180
net_rx_action+0x20b/0x3b0
? note_gp_changes+0x53/0xe0
? tick_setup_sched_timer+0x180/0x180
? __napi_schedule+0x9a/0xb0
? bnxt_msix+0x24/0x30
handle_softirqs+0xdd/0x2c0
__irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0
common_interrupt+0x85/0x90
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
This stack trace is from a crash triggered when an out of bounds rx_tpa
is dereferenced. The invalid write mentioned above is silent in this
particular crash.
Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next
power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID
with that size, so the wrapped ID can never index past the end of the
array. |
| Netdata is an open source observability tool. Prior to 2.10.4, an authenticated child agent can send an oversized DIMENSION SLOT value that str2ull_encoded passes to pluginsd_rrddim_put_to_slot in src/plugins.d/pluginsd_internals.h without an upper bound. prd_array_create in src/database/rrdset-pluginsd-array.h can then wrap the size_t allocation calculation while retaining the original large array size, causing the subsequent initialization loop to write beyond the undersized heap allocation and crash the parent agent. This issue is fixed in version 2.10.4 and nightly build 2.10.0-782-nightly. |
| Lantronix SLC8000/SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain a stack-based buffer overflow vulnerability that allows authenticated attackers to potentially execute arbitrary code by exploiting an undocumented mfc eeprom read command that copies unbounded user input into a bounded stack buffer before passing it to a system() call. Attackers can authenticate as any user to the terminal or CLI interface and supply an oversized input to trigger the overflow, potentially achieving complete loss of confidentiality, integrity, and availability on the affected device and impacting downstream serial-attached devices. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr->packet_len in the driver before calling
btintel_pcie_submit_rx_work(). |
| BusyBox dpkg read_package_field() steps past a NUL terminator on malformed .deb packages, causing an out-of-bounds heap read. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Insertion of sensitive information into externally-accessible file or directory in Windows Storage allows an authorized attacker to disclose information locally. |
| A missing lower-bound validation in the bson_new_from_buffer() function of libbson allows an integer underflow when processing BSON data with a zero-length prefix. The function reads a 32-bit document length from the input buffer but does not verify that the value is at least 5 (the minimum valid BSON document size) before using it in an array index calculation. When the length field is zero, the expression used to check the document's null terminator wraps to UINT32_MAX, causing a heap out-of-bounds read that crashes the process. An unauthorized party who can supply crafted BSON input to an application using this API can cause a denial of service. |
| Null pointer dereference in Windows Universal Disk Format File System Driver (UDFS) allows an authorized attacker to execute code locally. |
| Bridge is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Bridge is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Bridge is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: tag_brcm: legacy FCS: request needed tailroom
The legacy FCS tagger calculates the CRC over skb->len bytes starting at
skb->data. When a nonlinear skb reaches the tagger, this reads past the
linear head into unrelated slab memory.
The tagger appends an Ethernet FCS but does not declare that tailroom. As a
result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user
port, and nonlinear skbs can reach the CRC calculation.
Declare the required tailroom. DSA will then clear those features and the
networking core will linearize skbs before the tagger runs.
A KASAN-enabled dsa_loop test using this tagger reports:
BUG: KASAN: slab-out-of-bounds in crc32_le
Read of size 1 at addr ffff8880397086c0 by task exp/135
Call Trace:
crc32_le (lib/crc/crc32-main.c:38)
brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343)
dsa_user_xmit (net/dsa/user.c:942)
dev_hard_start_xmit (net/core/dev.c:3937)
__dev_queue_xmit (net/core/dev.c:4926)
packet_sendmsg (net/packet/af_packet.c:3110)
__sys_sendto (net/socket.c:2281)
The buggy address belongs to the object at ffff888039708400
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ffff888039708400, ffff8880397086c0) |
| A one-byte out-of-bounds heap read flaw was found in GIMP's uncompressed DDS image loader. When a user opens an uncompressed DDS image, the file-dds plug-in performs an unconditional one-byte look-ahead after processing the final pixel. This may cause the plug-in to crash if the byte immediately following the pixel buffer is inaccessible; no information disclosure or code execution has been demonstrated. |
| SumatraPDF 3.6.1 contains an integer overflow vulnerability in EngineMupdf::BuildPageLabelRec() when parsing PDF PageLabels /Nums entries. |
| The Botslab G980H dash camera firmware generates the default WiFi password using predictable device information, portions of which are advertised by the product. An unauthenticated attacker within WiFi range could potentially determine the remaining password characters through limited guessing and gain unauthorized access to the device network. |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.2.4 until 2.5.6, configuring synth.midi-channels above 16 allows the MIDI player to index _fluid_player_t::channel_isplaying outside its fixed-size heap allocation while tracking active channels. The resulting out-of-bounds reads and writes invoke undefined behavior and may compromise confidentiality, integrity, or availability. No crafted MIDI file is required because the unsafe condition is created by the channel-count configuration itself. Keeping synth.midi-channels at its default value of 16 avoids the vulnerable path. This issue is fixed in version 2.5.6. |
| A logic flaw in Java cache key handling object comparison handling could lead to improper identifier resolution when processing specific user account structures. The issue has been remediated by updating the internal comparison routines to ensure accurate object evaluation and prevent potential identity mismatch conditions. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's CPython bytecode .pyc marshal parser was vulnerable because the CPython marshal readers accepted a 32-bit string length without rejecting values that overflow the size-plus-one allocation. The vulnerability is triggered by opening or inspecting a crafted .pyc file through r2 or rabin2. A length of 0xffffffff wrapped the allocation to zero before the common byte reader wrote attacker-controlled data and fill bytes beyond the heap allocation. This can cause heap memory corruption and denial of service; arbitrary code execution is possible but has not been demonstrated. This issue is fixed in version 6.2.0. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's ELF PN_XNUM handling was vulnerable because the ELF parser allocated the program-header array using the resolved PN_XNUM count but several consumers still iterated with the original e_phnum value of 65535. The vulnerability is triggered by processing a crafted ELF file with e_phnum = 0xffff and a much smaller resolved count in shdr[0].sh_info. Consumers iterated beyond the allocated program-header array. This can cause a heap out-of-bounds read and process termination, resulting in denial of service; memory disclosure and code execution have not been demonstrated. This issue is fixed in version 6.2.0. |
