| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick before 7.1.2-26 and 6.9.13-51 contains a memory leak in the hough lines operation: when a specific operation fails, a small memory leak occurs. |
| ImageMagick before 7.1.2-26 contains a memory leak vulnerability in the TIFF encoder when memory allocation fails. Attackers can trigger allocation failures during TIFF image processing to cause memory exhaustion and denial of service. |
| ImageMagick before 7.1.2-26 and 6.9.13-51 contains a memory leak in the ICON decoder that occurs when a memory allocation fails. Processing a crafted ICON file that triggers an allocation failure leaks memory, which may lead to a denial of service. |
| ImageMagick before 7.1.2-26 contains a memory leak vulnerability in the JNG encoder when a blob cannot be opened. Attackers can trigger the memory leak by providing malformed JNG files that fail blob operations, causing resource exhaustion. |
| ImageMagick before 7.1.2-26 and 6.9.x before 6.9.13-51 contains a memory leak in the YUV decoder that occurs when opening of the blob fails. Repeated triggering can lead to resource exhaustion (denial of service). |
| ImageMagick before 7.1.2-18 contains a memory leak vulnerability in the META reader when processing APP1JPEG input paths. Attackers can trigger this memory leak by providing specially crafted APP1JPEG image files, causing denial of service through resource exhaustion. |
| ImageMagick before 7.1.2-26 contains a memory leak vulnerability in the VIFF encoder when memory allocation fails. Attackers can trigger allocation failures by processing specially crafted VIFF images to exhaust available memory and cause denial of service. |
| Socket.IO enables bidirectional and low-latency communication for every platform. From 4.1.0 before 6.6.7, Engine.IO protocol v4 polling transport does not properly close the HTTP response for invalid binary POST requests with Content-Type: application/octet-stream, allowing an unauthenticated attacker to exhaust server-side connections and sockets. This issue is fixed in version 6.6.7. |
| Wasmtime is a runtime for WebAssembly. All versions prior to 24.0.10; versions 25.0.0 through those before 36.0.11; versions 37.0.0 through those before 44.0.3; and versions 45.0.0 and 45.0.1 contain a native implementation of WASIp1 which suffers from a leak in the fd_renumber function where the file descriptor being renumbered to is not properly closed. Wasmtime's implementation erroneously only updated the table of descriptors for WASIp1 and didn't update the underlying table of descriptors used by the host. This behavior means that while fd_renumber works correctly from a guest's perspective it ends up leaking resources in the host that aren't cleaned up until the corresponding Store is destroyed. In a loop, guests can use fd_renumber to cause hosts to exhaust both resources and file descriptors. This bug only affects the native implementation of WASIp1, meaning that only runtimes which load core wasm modules and expose fd_renumber are affected. Runtimes are additionally only affected if they expose the ability to acquire a file descriptor, such as opening a file. For runtimes that deny access to files they are unaffected. This issue has been fixed in versions 24.0.10, 36.0.11, 44.0.3, and 45.0.2. |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a memory leak in coders/txt.c when processing TXT files with texture attributes: the texture object allocated via ReadImage is not released when GetTypeMetrics fails, leaking memory each time a crafted TXT file with a texture attribute is processed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying
When marking a page dirty, complain about not having a running/loaded vCPU
if and only if the VM is still alive, i.e. its refcount is non-zero. This
will allow fixing a memory leak for x86 SEV-ES guests without hitting what
is effectively a false positive on the WARN.
For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page
across an exit to userspace, and typically unmaps the page on the next
KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM
needs to unmap the page when the vCPU is destroyed, which in turn triggers
the WARN about not having a running vCPU.
Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,
as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;
suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But
loading a vCPU during destruction is gross (ideally nVMX code would be
cleaned up), risks complicating the SEV-ES code (KVM would need to ensure
the temporarily load()+put() only runs when the vCPU isn't already loaded),
and is ultimately pointless.
The motivation for the WARN is to guard against KVM dirtying guest memory
without pushing the corresponding GFN to the active vCPU's dirty ring, e.g.
to ensure userspace doesn't miss a dirty page. But for the VM's refcount
to reach zero, there can't be _any_ userspace mappings to the dirty ring,
as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if
userspace had a valid mapping for the dirty ring, then the vCPU file and
thus the owning VM would still be alive. And so since userspace can't
possibly reach the dirty ring, whether or not KVM technically "misses" a
push to the dirty ring is irrelevant. |
| A flaw was found in the Linux kernel's ksmbd component. A memory leak can occur if a client sends a session setup request with an unknown NTLMSSP message type, potentially leading to resource exhaustion. |
| In the Linux kernel, the following vulnerability has been resolved:
VFS: fix possible failure to unlock in nfsd4_create_file()
atomic_create() in fs/namei.c drops the reference to the dentry
when it returns an error.
This behaviour was imported into dentry_create() so that it
will drop the reference if an error is returned from atomic_create(),
though not if vfs_create() returns an error (in the case where
->atomic_create is not supported).
The caller - nfsd4_create_file() - is made aware of this by checking
path->dentry, which will either be a counted reference to a dentry, or
an error pointer.
However the change to use start_creating()/end_creating() (which landed
shortly before the dentry_create() change landed, though was likely
developed around the same time) means that nfsd4_create_file() *needs* a
valid dentry so that it can unlock the parent.
The net result is that if NFSD exports a filesystem which uses
->atomic_create, and if a call to ->atomic_create returns an error, then
nfsd4_create_file() will pass an error pointer to end_creating()
and the parent will not be unlocked.
Fix this by changing dentry_create() to make sure path->dentry is always
a valid dentry, never an error-pointer. The actual error is already
returned a different way.
Note that if ->atomic_create() returns a different dentry (which may not
be possible in practice) we are guaranteed (because it is only ever
provided by d_spliace_alias()) that it will have the same d_parent and
so it will have the same effect when passed to end_creating(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: fix leaking free_bds
While reclaiming the tx queue we fast forward the write pointer to
drop any data in flight. These dropped frames are not added back
to the pool of free bds. We also need to tell the netdev that we
are dropping said data. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up by a couple of lines so that the
allocated dst SG list gets freed on error as well as success. |
| In the Linux kernel, the following vulnerability has been resolved:
amd-pstate: Fix memory leak in amd_pstate_epp_cpu_init()
On failure to set the epp, the function amd_pstate_epp_cpu_init()
returns with an error code without freeing the cpudata object that was
allocated at the beginning of the function.
Ensure that the cpudata object is freed before returning from the
function.
This memory leak was discovered by Claude Opus 4.6 with the aid of
Chris Mason's AI review-prompts
(https://github.com/masoncl/review-prompts/tree/main/kernel). |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix a buffer leak in __ceph_setxattr()
The old_blob in __ceph_setxattr() can store
ci->i_xattrs.prealloc_blob value during the retry.
However, it is never called the ceph_buffer_put()
for the old_blob object. This patch fixes the issue of
the buffer leak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups
v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect
buffer and the workgroup buffer and is expected to release them before
returning. When any of the workgroup counts read from the buffer is zero,
the function bailed out early and skipped the cleanup, leaking the vaddr
mappings of both BOs.
Jump to the cleanup path instead of returning directly, so the mappings
are always dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: restore reservation on error in hugetlb folio copy paths
Two sites in mm/hugetlb.c allocate a hugetlb folio via
alloc_hugetlb_folio() (consuming a VMA reservation) and then call
copy_user_large_folio(), which became int-returning in commit 1cb9dc4b475c
("mm: hwpoison: support recovery from HugePage copy-on-write faults") and
can now fail (e.g. -EHWPOISON on a hwpoisoned source page). On the
failure path, folio_put() restores the global hugetlb pool count through
free_huge_folio(), but the per-VMA reservation map entry is left marked
consumed:
- hugetlb_mfill_atomic_pte() resubmission path (UFFDIO_COPY)
- copy_hugetlb_page_range() fork-time CoW path when
hugetlb_try_dup_anon_rmap() fails (rare: pinned hugetlb anon
folio under fork)
User-visible effect: on UFFDIO_COPY into a private hugetlb VMA where the
resubmission copy fails, the reservation for that address is leaked from
the VMA's reserve map. A subsequent fault at the same address takes the
no-reservation path, and under hugetlb pool pressure the task is SIGBUSed
at an address it had previously reserved. The fork-time CoW path leaks
the same way in the child VMA's reserve map, though it requires the much
rarer combination of pinned hugetlb anon page + hwpoisoned source.
Add the missing restore_reserve_on_error() call before folio_put() on both
error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache metadata: fix memory leak on metadata abort retry
When failing to acquire the root_lock in dm_cache_metadata_abort because
the block_manager is read-only, the temporary block_manager created
outside the root_lock is not properly released, causing a memory leak.
Reproduce steps:
This can be reproduced by reloading a new table while the metadata
is read-only. While the second call to dm_cache_metadata_abort is
caused by lack of support for table preload in dm-cache, mentioned
in commit 9b1cc9f251af ("dm cache: share cache-metadata object across
inactive and active DM tables"), it exposes the memory leak in
dm_cache_metadata_abort when the function is called multiple times.
Specifically, dm-cache fails to sync the new cache object's mode during
preresume, creating the reproducer condition.
This issue could also occur through concurrent metadata_operation_failed
calls due to races in cache mode updates, but the table preload scenario
below provides a reliable reproducer.
1. Create a cache device with some faulty trailing metadata blocks
dmsetup create cmeta <<EOF
0 200 linear /dev/sdc 0
200 7992 error
EOF
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0"
2. Suspend and resume the cache to start a new metadata transaction and
trigger metadata io errors on the next metadata commit.
dmsetup suspend cache
dmsetup resume cache
3. Write to the cache device to update metadata
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --size 64k
4. Preload the same table
dmsetup reload cache --table "$(dmsetup table cache)"
5. Resume the new table. This triggers the memory leak.
dmsetup suspend cache
dmsetup resume cache
kmemleak logs:
<snip>
unreferenced object 0xffff8880080c2010 (size 16):
comm "dmsetup", pid 132, jiffies 4294982580
hex dump (first 16 bytes):
00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ...
backtrace (crc 3118f31c):
kmemleak_alloc+0x28/0x40
__kmalloc_cache_noprof+0x3d9/0x510
dm_block_manager_create+0x51/0x140
dm_cache_metadata_abort+0x85/0x320
metadata_operation_failed+0x103/0x1e0
cache_preresume+0xacd/0xe70
dm_table_resume_targets+0xd3/0x320
__dm_resume+0x1b/0xf0
dm_resume+0x127/0x170
<snip> |
