| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix VF bringup affecting PF promiscuous state
Mbox handling of nix_set_rx_mode for a VF with promiscuous and
all_multi flags set to false causes deletion of the PF's promiscuous
and allmulti MCAM rules. This occurs because the APIs that
enable/disable these rules operate only on the PF, even when the
mbox request is made via a VF interface.
Guard both rvu_npc_enable_allmulti_entry() and
rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so
that a VF bringing up or tearing down its interface cannot inadvertently
clear the PF's MCAM rules. |
| A vulnerability has been identified in SIMATIC WinCC V7.5 (All versions), SIMATIC WinCC V8.0 (All versions < V8.0 Update 11), SIMATIC WinCC V8.1 (All versions < V8.1 Update 7). The affected application does not sufficiently restrict the permissions assigned to a database role.
This could allow an authenticated remote attacker with database access to escalate privileges and execute arbitrary commands on the host system where SIMATIC WinCC is installed, potentially leading to a compromise of the system. |
| A vulnerability was determined in calcom cal.com and cal.diy up to 6.2.0. This vulnerability affects the function credentials.delete of the file /api/trpc/credentials/delete of the component Credentials Handler. This manipulation of the argument teamId causes improper privilege management. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| containerd is an open-source container runtime. From 2.1.0 until 2.2.7 and 2.3.4, containerd's CRI CreateContainer checkpoint restore is vulnerable because CRIU restores process security state from checkpoint data instead of enforcing the destination ContainerConfig. An attacker who can create a container from a crafted checkpoint can supply restored credentials, capabilities, no_new_privs, and seccomp state. The restored process can run as root with full capabilities and no enforced seccomp filters while CRI status reports the requested configuration. Systems that do not use CRI checkpoint restore are not affected. This issue is fixed in versions 2.2.7 and 2.3.4. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ OAuth credential refresh retains revoked runtime tags. when an existing AMQP connection refreshes from an OAuth token that grants the impersonator tag to a valid same-username token that no longer grants that tag, RabbitMQ updates the OAuth backend implementation (token/scopes/expiry) but leaves the connection's runtime #user.tags unchanged. rabbitaccesscontrol:checkuserid/2 then still honors the stale impersonator tag, so the connection (including newly opened channels) can continue publishing messages with a foreign AMQP userid after that privilege should have been revoked. A fresh connection using the downgraded token correctly refuses the same publish, proving the defect is stale session state rather than the token Limited to connections that once held impersonator and successfully refresh to a downgraded same-username rabbitauthbackendoauth2 (or an equivalent refresh-capable backend that returns tags) is enabled for This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| Incorrect Privilege Assignment vulnerability in WP ManageNinja LLC Fluent CRM fluent-crm allows Privilege Escalation.This issue affects Fluent CRM: from n/a through 3.2.5. |
| A vulnerability was detected in ZKTeco BioTime 9.5.6 Build 20260130.3206. Affected by this issue is some unknown functionality of the file /base/api/systemSettings of the component System Settings API. Performing a manipulation results in improper access controls. The attack can be initiated remotely. Upgrading to version 9.5.6 Build 3623 can resolve this issue. It is advisable to upgrade the affected component. |
| Incorrect Privilege Assignment vulnerability in Mitsubishi Electric GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, MC Works64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, and MobileHMI 10.97.3 and prior allows an attacker who can log in using the same administrator account for the affected products to launch and operate DCOM objects locally or remotely. During installation, the installers of the affected products unnecessarily grant default DCOM permissions to the administrator account of the affected products. Users with that administrator accounts can locally or remotely launch and operate DCOM objects that should require UAC elevation. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition. |
| A flaw has been found in Colorful iGameCenter 2.0.0.82. Affected by this vulnerability is the function MmMapIoSpace in the library AMDRyzenMasterDriver.sys of the component Dispatch Handler. This manipulation of the argument SystemBuffer causes privilege defined with unsafe actions. The attack needs to be launched locally. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in Yungengxin Yun Jia Security Guard up to 2.7.1.9. Impacted is the function sub_14000885C in the library kgameprotect.sys. Executing a manipulation of the argument Pid can lead to improper privilege management. The attack requires local access. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in yangzongzhuan RuoYi up to 4.8.3. This affects the function checkRoleAllowed of the file /system/role/authDataScope. Such manipulation of the argument roleKey leads to improper privilege management. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in SEMCMS up to 5.0. The impacted element is an unknown function of the file /admin/SEMCMS_User.php?Class=Deleted&CF=user. Such manipulation leads to improper authorization. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in BerriAI LiteLLM up to 1.94.0. This affects the function get_secret of the file secret_managers/main.py of the component Secret Resolution. The manipulation of the argument api_key leads to improper authorization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The error page mechanism of the Java Servlet Specification requires that, when an error occurs and an error page is configured for the error that occurred, the original request and response are forwarded to the error page. This means that the request is presented to the error page with the original HTTP method. If the error page is a static file, expected behaviour is to serve content of the file as if processing a GET request, regardless of the actual HTTP method. The Default Servlet in Apache Tomcat 9.0.0.M1 to 9.0.0.M20, 8.5.0 to 8.5.14, 8.0.0.RC1 to 8.0.43 and 7.0.0 to 7.0.77 did not do this. Depending on the original request this could lead to unexpected and undesirable results for static error pages including, if the DefaultServlet is configured to permit writes, the replacement or removal of the custom error page. Notes for other user provided error pages: (1) Unless explicitly coded otherwise, JSPs ignore the HTTP method. JSPs used as error pages must must ensure that they handle any error dispatch as a GET request, regardless of the actual method. (2) By default, the response generated by a Servlet does depend on the HTTP method. Custom Servlets used as error pages must ensure that they handle any error dispatch as a GET request, regardless of the actual method. |
| Incorrect Privilege Assignment vulnerability in WP ManageNinja LLC Fluent CRM fluent-crm allows Privilege Escalation.This issue affects Fluent CRM: from n/a through 3.2.5. |
| Incorrect Privilege Assignment vulnerability in Shabti Kaplan Frontend Admin by DynamiApps acf-frontend-form-element allows Privilege Escalation.This issue affects Frontend Admin by DynamiApps: from n/a through 3.29.13. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5, windows opened from a sandboxed top-level document did not inherit that document's active HTML sandbox restrictions. Untrusted content in a sandboxed top-level document that was permitted to open popups could therefore create a window with the Electron application's full origin instead of the restricted origin intended by the sandbox. Applications that deny such popups with setWindowOpenHandler are not affected. This issue is fixed in versions 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5, an Electron <webview> guest could enable nodeIntegrationInWorker for its Web Workers even when the unsandboxed embedder had Node.js integration disabled, allowing untrusted guest content to create a Node-enabled worker with more privilege than the embedder granted. Applications that do not enable the <webview> tag or that keep the embedder sandboxed are not affected. This issue is fixed in versions 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5. |
| A flaw was found in FreeIPA. When a trust relationship is configured between FreeIPA and Active Directory, Active Directory users can bypass authentication for FreeIPA services, including the portal, SMB server, and LDAP directory. This is possible by impersonating a client name in the Ticket Granting Service (TGS) due to FreeIPA services not verifying Privilege Attribute Certificate (PAC) certificates. This vulnerability could allow an authenticated Active Directory user to escalate their privileges within the FreeIPA domain. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
