| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details? |
| In the Linux kernel, the following vulnerability has been resolved:
device property: initialize the remaining fields of fwnode_handle in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
[ Fix typo in commit message. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA AES cipher key requests
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
When init (zeroing) on allocation is requested, for kmalloc() we
generally have to zero the full object size even if a smaller size is
requested, in order to provide krealloc()'s __GFP_ZERO guarantees.
But if we track the requested size, krealloc() uses that information to
do the right thing, so we can zero only the requested size. With red
zoning also enabled, any extra size became part of the red zone, so it
must not be zeroed and thus we must zero only the requested size.
However the current check is imprecise, and will trigger also when only
SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking
the requested size). This means enabling red zoning alone can compromise
krealloc()'s __GFP_ZERO contract.
Fix this by using slub_debug_orig_size() instead, which is the exact
check for whether the requested size is tracked. We don't need to care
if red zoning is also enabled or not. Also update and expand the
comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: set tx buffer type for SMD frames
Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp
Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix SECINFO_NO_NAME decode error cleanup
nfsd4_decode_secinfo_no_name() currently initializes sin_exp after
decoding sin_style. If the XDR stream is truncated, the decoder returns
nfserr_bad_xdr before sin_exp is initialized.
Since commit 3fdc54646234 ("NFSD: Reduce amount of struct
nfsd4_compoundargs that needs clearing"), the inline iops array is not
cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore
leave sin_exp holding stale union contents from a previous operation.
The error response path still invokes nfsd4_secinfo_no_name_release(),
which calls exp_put() on a non-NULL sin_exp.
Initialize sin_exp before the first failable decode step, matching
nfsd4_decode_secinfo(). |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: some missing initializations on replay
In several places in the code, we have a label to signify
the start of the code where a request can be replayed if
necessary. However, some of these places were missing the
necessary reinitializations of certain local variables
before replay.
This change makes sure that these variables get initialized
after the label. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation. |
| In the Linux kernel, the following vulnerability has been resolved:
erspan: Initialize options_len before referencing options.
The struct ip_tunnel_info has a flexible array member named
options that is protected by a counted_by(options_len)
attribute.
The compiler will use this information to enforce runtime bounds
checking deployed by FORTIFY_SOURCE string helpers.
As laid out in the GCC documentation, the counter must be
initialized before the first reference to the flexible array
member.
After scanning through the files that use struct ip_tunnel_info
and also refer to options or options_len, it appears the normal
case is to use the ip_tunnel_info_opts_set() helper.
Said helper would initialize options_len properly before copying
data into options, however in the GRE ERSPAN code a partial
update is done, preventing the use of the helper function.
Before this change the handling of ERSPAN traffic in GRE tunnels
would cause a kernel panic when the kernel is compiled with
GCC 15+ and having FORTIFY_SOURCE configured:
memcpy: detected buffer overflow: 4 byte write of buffer size 0
Call Trace:
<IRQ>
__fortify_panic+0xd/0xf
erspan_rcv.cold+0x68/0x83
? ip_route_input_slow+0x816/0x9d0
gre_rcv+0x1b2/0x1c0
gre_rcv+0x8e/0x100
? raw_v4_input+0x2a0/0x2b0
ip_protocol_deliver_rcu+0x1ea/0x210
ip_local_deliver_finish+0x86/0x110
ip_local_deliver+0x65/0x110
? ip_rcv_finish_core+0xd6/0x360
ip_rcv+0x186/0x1a0
Reported-at: https://launchpad.net/bugs/2129580 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Initialize state mutex
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure
pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features
when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE,
which is left set. Later vCPUs on that VM then skip the SVE setup and
register with a NULL sve_state, which the guest's first FP access hands
to sve_load_state().
Return the error without touching vcpu_features. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: fix soft lockup on out-of-range tpd_cons read
The hardware can report an out-of-range tpd_cons (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. To avoid
a soft lockup treat it as "nothing new to clean" instead.
Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0,
4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that
the ports are directly linked to:
- Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap
precursor, before the lockup was captured with a full trace
elsewhere:
atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms
atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second
atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex>
65535 (0xffff) here is the same value tpd_cons reads back once the
loop below gets stuck.
- Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time
caught by the soft lockup watchdog with a full stack trace:
watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329]
CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy)
RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c]
Call Trace:
<TASK>
__napi_poll+0x32/0x1e0
napi_threaded_poll_loop+0x286/0x2e0
napi_threaded_poll+0xfd/0x140
kthread+0xf7/0x130
ret_from_fork+0x2da/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
The consolidation of the breakpoint and watchpoint register accessors
switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter
selects backing storage with demux_wb_reg(), which only handles Op2 values
4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits
KVM_BUG_ON() and marks the VM dead.
DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor
already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4,
restoring the pre-regression behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: copy the hostid into the ctrl before creating PR pc_refs
Commit 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and
implementation") added a second uuid_copy() of args->hostid near the end
of nvmet_alloc_ctrl(), and commit 7b658153f1b8 ("nvmet: Remove duplicate
uuid_copy") removed the original copy that sat before
nvmet_ctrl_init_pr() instead of the new one.
Since then nvmet_ctrl_init_pr() snapshots ctrl->hostid into the
per-controller per-namespace reservation refs while the uuid_copy()
from the connect data runs later, after the controller is published.
The ctrl is allocated with kzalloc(), so every pc_ref created on this
path stores the nil UUID.
pc_ref->hostid has a single consumer: nvmet_pr_set_ctrl_to_abort()
matches it against the preempted registrant's hostid to kill and drain
the victim's in-flight I/O for Preempt and Abort. The match can never
hit with the nil UUID, so whenever a namespace with reservations
enabled exists before a host connects, which includes every reconnect,
Preempt and Abort silently degrades into a plain Preempt: the
preempting host sees success while the victim's in-flight I/O is still
in the air.
Copy the hostid where the rest of the connect data is consumed, before
the controller is published and before nvmet_ctrl_init_pr() takes its
snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: fix uninitialized typec_partner_desc in cd321x_update_work()
cd321x_update_work() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operation. Introduce a helper function, blk_mq_rq_late_init() for this,
and absorb blk_mq_rq_time_init() since the two run together. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified
Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the
runtime eVMCS controls (pin, primary, secondary, etc.) are being updated.
If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and
then runs the same L2 with TPR virtualization disabled, KVM will fail to
refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR
virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or
L1 by proxy) read and write L0's TPR. |
