| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management
xmit_frame together with its xmit_buf from the driver's fixed-size
management-TX pools via alloc_mgtxmitframe(). On the normal path the frame
is handed to dump_mgntframe(), which transfers ownership and eventually
returns both objects to their pools (the frame and, for beacons, the buf
in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion
path).
Several error/edge paths return early after a successful
alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never
transferred and neither object is freed:
- issue_beacon(): beacon larger than 512 bytes
- issue_probersp(): cur_network->ie_length > MAX_IE_SZ
- issue_probersp(): kzalloc() of the SSID scratch buffer fails
- issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP
Because alloc_mgtxmitframe() removes the frame and buf from their free
lists (list_del_init) without placing them on any pending list, an
orphaned pair is on no list and referenced by nobody, so it is only
reclaimed at driver teardown. Repeated hits progressively exhaust the
management-TX pools until alloc_mgtxmitframe() returns NULL and the
interface can no longer send beacons or probe/assoc responses.
Free the frame and buffer on these paths, matching the existing correct
error handling in issue_assocreq(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a8671 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*"). |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix memory leak due to multiple rx_stats allocation
rx_stats for each arsta is allocated when adding a station.
arsta->rx_stats will be freed when a station is removed.
Redundant allocations are occurring when the same station is added
multiple times. This causes ath12k_mac_station_add() to be called
multiple times, and rx_stats is allocated each time. As a result there
is memory leaks.
Prevent multiple allocations of rx_stats when ath12k_mac_station_add()
is called repeatedly by checking if rx_stats is already allocated
before allocating again. Allocate arsta->rx_stats if arsta->rx_stats
is NULL respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| storage/pkg/archive.ApplyLayer and ApplyUncompressedLayer may, when processing corrupt or malicious inputs, leak a file descriptor; unbounded repeated calls can exhaust the process’ file descriptor
limit |
| DBI versions before 1.656 for Perl hang on a later open of a DBD::DBM table because a failed open_data does not release the table's lock.
open_data creates the table's lock file and takes an exclusive flock on it for a CREATE, before the checks that can croak: a dbm_mldbm value that is not a module name, a failing tie, or a missing data file. The croak unwinds before the table object is blessed, so nothing releases the lock, and the meta data holding the open descriptor stays cached on the database handle.
The dbm_mldbm and dbm_type values come from the DSN or the connect attributes, so a caller that chooses the serializer or the storage backend can trigger the failure.
The flock has no timeout, so a later open of that table (even through a separate database handle) blocks for as long as the handle holding the stale lock lives, in the same process or any other. |
| One logical thread of a user-mode ThreadX module costs the Module Manager's shared object pool two allocations, not one. The module asks for a `TX_THREAD` control block through `txm_module_object_allocate`; `_txm_module_manager_thread_create` then takes a second allocation of `TXM_MODULE_KERNEL_STACK_SIZE` bytes for the privileged kernel stack that thread's system calls run on, and records it in the control block. Both come from `_txm_module_manager_object_pool` and both are linked onto the module's allocation list.
The Module Manager's thread-delete dispatcher released only the first. The kernel stack stayed allocated until the whole module was stopped, so a module that creates, terminates and deletes threads in a loop — every state transition valid, every service returning `TX_SUCCESS` — removed a fixed block from a finite pool shared by the manager and by every other loaded module, on every cycle, for as long as it stayed loaded. Once the pool is exhausted, no memory-protected module can create any kernel object and no user-mode module thread can be created anywhere in the system.
Vulnerable function: `_txm_module_manager_tx_thread_delete_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`. |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix sbi->pipe file reference leak in autofs_kill_sb()
When autofs_fill_super() fails before clearing AUTOFS_SBI_CATATONIC (for
example, when find_get_pid() fails on an invalid pgrp mount option, or
when an fs_context is closed before mounting), deactivate_locked_super()
invokes autofs_kill_sb() -> autofs_catatonic_mode(sbi).
Because AUTOFS_SBI_CATATONIC is still set in sbi->flags,
autofs_catatonic_mode() returns early without calling fput(sbi->pipe),
permanently leaking the pipe struct file reference.
Explicitly release sbi->pipe in autofs_kill_sb() if it is still non-NULL
after autofs_catatonic_mode(). |
| In the Linux kernel, the following vulnerability has been resolved:
tg3: clean up PHYLIB resources on probe failure
tg3_get_invariants() can register an MDIO bus and connect a PHY for
USE_PHYLIB devices. If tg3_init_one() later fails, its common error path
releases the mappings and netdev without undoing those PHYLIB resources.
Disconnect the PHY and unregister the MDIO bus before the remaining
teardown. Guard PHY cleanup with USE_PHYLIB to match tg3_phy_init(), and
call tg3_mdio_fini() unconditionally to match tg3_mdio_init(). The existing
IS_CONNECTED and MDIOBUS_INITED flags make both helpers safe when
initialization only completed partially.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix dst leak for uncached routes.
ip6_route_output_flags(), ip6_rt_put_flags(), and ip6_dst_check()
detect an uncached route by list_empty(&rt->dst.rt_uncached),
which replaced the static DST_NOCACHE flag check in commit
a4c2fd7f7891 ("net: remove DST_NOCACHE flag").
When a device is unregistered, rt6_uncached_list_flush_dev()
unlinks uncached routes tied to the device from rt6_uncached_list.
Previously, they were moved to another list with list_move()
(__list_del_entry() + list_add()), and since commit 98aa546af5e4
("inet: remove (struct uncached_list)->quarantine"), the routes
are just unlinked with list_del_init().
If list_del_init() runs concurrently, list_empty() evaluates to
true; ip6_route_output_flags() calls dst_hold_safe() incorrectly
and ip6_rt_put_flags() skips ip6_rt_put(), leaking dst, and thus
dev tied via rt->from as well.
The same race is partially fixed by commit 9a6f0c4d5796 ("dst:
fix races in rt6_uncached_list_del() and rt_del_uncached_list()").
Let's check rt6->dst.rt_uncached_list instead.
Note that IPv4 does not have the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT
Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added
NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which
rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with
-ERANGE.
However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user
sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits
FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and
parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0,
sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with
fou->protocol == 0.
In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb()
triggers IP protocol resubmission when fou->protocol > 0, whereas
returning 0 tells the UDP tunnel layer that the skb was consumed without
freeing it. When fou->protocol == 0, every packet received on the socket
returns 0 from fou_udp_recv() and leaks the sk_buff.
Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that
creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with
-EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share
parse_nl_config()) unaffected.
Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic
Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE =
FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel,
FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and
fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks
all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to
59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected
with -EINVAL (-22). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure
nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested
netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc
ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was
already queued.
Route them through a new free_list label, mirroring the SDRES path in
the same file which already does this. Harmless on the success path
too -- send_snl_sdreq() drains the list as it moves nodes, so it's
already empty by the time free_list runs. |
| Text::CSV_XS versions before 1.65 for Perl leak the parsed fields of a record that fails to parse in getline.
getline collects the fields of a record into a new array and returns a reference to it only when the parse succeeds. When the record has a syntax error, getline returns undef and never frees the array or the fields parsed before the error.
A long-running process parsing untrusted CSV retains every malformed record it is sent, so repeated malformed input exhausts its memory. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix memory leak of fence event on execbuffer failure
virtio_gpu_execbuffer_ioctl() reserves a DRM event with
drm_event_reserve_init() when VIRTGPU_EXECBUF_RING_IDX selects a ring that
userspace has enabled polling for. virtio_gpu_init_submit() does this
before the BO handles, the command buffer, the syncobj arrays and the
in-fence are processed, so every later error path runs with the event
already pending, including plain argument validation failures such as an
invalid bo_handle or an in-syncobj that carries no fence.
On those paths, virtio_gpu_cleanup_submit() drops the out-fence without
cancelling the event. The fence is freed without ever having been emitted,
taking the only driver-side pointer to the event with it. Closing the DRM
file does not help. drm_events_release() unlinks pending events but
deliberately leaves the freeing to the driver's later drm_send_event(),
which never runs for an orphaned event, so the allocation is leaked
permanently.
Found when fuzzing the virtio driver with Syzkaller:
BUG: memory leak
unreferenced object 0xffff88802c176e80 (size 96):
comm "syz.1.367", pid 10561, jiffies 4294960122
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c8 6e 17 2c 80 88 ff ff 00 00 00 00 00 00 00 00 .n.,............
backtrace (crc e1973c6b):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4597 [inline]
slab_alloc_node mm/slub.c:4917 [inline]
__kmalloc_cache_noprof+0x49d/0x6f0 mm/slub.c:5485
_kmalloc_noprof include/linux/slab.h:988 [inline]
_kzalloc_noprof include/linux/slab.h:1309 [inline]
virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:282 [inline]
virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
virtio_gpu_execbuffer_ioctl+0xbbf/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix by cancelling and freeing the DRM event on the execbuffer error path
before dropping the fence. Clear the fence's event pointer after
cancellation so it does not retain a dangling pointer. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, Max-Age processing can overflow and skip closing a connection. An attacker can consequently exhaust the connection pool temporarily until garbage collection resolves the connections. This issue is fixed in version 3.14.4. |
| A flaw was found in Hibernate Reactive. When an HTTP endpoint is exposed to perform database operations, a remote client can prematurely close the HTTP connection. This action may lead to leaking connections from the database connection pool, potentially causing a Denial of Service (DoS) by exhausting available database connections. |
| In the Linux kernel, the following vulnerability has been resolved:
tap: free page on error paths in tap_get_user_xdp()
tap_get_user_xdp() rejects a frame shorter than ETH_HLEN with -EINVAL,
and returns -ENOMEM when build_skb() fails. Both paths jump to the err
label without freeing the page that vhost_net_build_xdp() allocated for
the frame. tap_sendmsg() discards the per-buffer return value and always
returns 0, so vhost_tx_batch() takes the success path and never frees
the page; each rejected frame in a batch leaks one page-frag chunk.
Free the page on both error paths, before the skb is built. This is the
tap counterpart of the same leak in tun_xdp_one(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix object leak when drm_gem_handle_create() fails
virtio_gpu_gem_create() owns the reference taken by
virtio_gpu_object_create(). On the drm_gem_handle_create() error path it
calls drm_gem_object_release() instead of dropping that reference.
drm_gem_object_release() is the inverse of drm_gem_object_init() and does
not touch the reference count or call obj->funcs->free(), so it is only
correct as the last step of a destructor, as in
virtio_gpu_cleanup_object(). Using it here leaves the bo at refcount 1
with no remaining reference, so virtio_gpu_free_object() never runs and
the shmem pages, sg table and virtio_gpu_object are leaked. Since
virtio_gpu_object_create() has already set bo->created,
VIRTIO_GPU_CMD_RESOURCE_UNREF is not queued either, leaking the host-side
resource and the resource id.
drm_gem_handle_create_tail() drops the handle reference on all of its
internal error paths, so the caller only has to drop its own. Use
drm_gem_object_put(), matching the success path below. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: free page on build_skb failure in tun_xdp_one()
When build_skb() fails in tun_xdp_one(), the function sets ret to
-ENOMEM and jumps to the out label, which returns without freeing the
page that vhost_net_build_xdp() allocated for the frame. As with the
short-frame rejection path, tun_sendmsg() discards the per-buffer error
and still returns total_len, so vhost_tx_batch() takes the success path
and never frees the page. Each build_skb() failure in a batch leaks one
page-frag chunk.
Free the page before taking the error path, matching the put_page() the
other error exits of tun_xdp_one() already perform. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create()
Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made
xe_svm_init() unconditional in xe_vm_create() and extended it to also
initialize a "simple" gpusvm state for non-fault-mode VMs. The matching
xe_svm_fini() call in xe_vm_close_and_put() was updated to run
unconditionally, but the error unwind path in xe_vm_create() was not.
On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has
already succeeded but xe_svm_fini() is only called when
XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves
vm->svm.gpusvm partially initialized and leaks the resources allocated
by drm_gpusvm_init().
For fault-mode VMs, xe_svm_init() additionally acquires the pagemap
owner via drm_pagemap_acquire_owner() and the pagemaps via
xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(),
not xe_svm_fini(). On the same error path, xe_svm_close() is not
called either, so fault-mode VMs leak the pagemap owner and pagemaps.
Fix both leaks:
- Call xe_svm_fini() unconditionally on the err_svm_fini path, matching
the unconditional xe_svm_init() call. Move the vm->size = 0
assignment out of the conditional so the xe_vm_is_closed() assert in
xe_svm_fini() (and xe_svm_close()) holds for both modes.
- Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching
the ordering used in xe_vm_close_and_put().
(cherry picked from commit ca2a3587d577ba764e0fe628fb676244fc33ddd4) |
