| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Prevent queue stop with deferred completions
When the driver receives a burst of packets, it can mark a BD with the
NO_CMPL bit to defer completions. The expectation is that the last
packet in the ring will have this bit unset and the completion generated
by that packet will cleanup that packet and the ones preceding it. This
helps to reduce the number of completions fired.
The suppressed completions are controlled by the driver and the number
of packets with suppressed completions scales with the size of the ring.
SW USO packets, on the other hand, have an upper bound on the maximum
number of BDs which can be consumed which does not scale with the ring
size.
So, for small rings it is possible that: a burst of packets is handed to
the driver, the driver defers completions for all of the packets because
the number of free descriptors stays above the threshold in the driver.
Then, a USO packet arrives, but the number of BDs available is not
enough and the USO code exits early.
In this case, you end up in a state where the ring is full of packets
with their completions suppressed, which can cause the queue to stop and
never be restarted.
Assuming default CONFIG_MAX_SKB_FRAGS, this is only possible for small
rings (<= 457 descriptors, below the driver default value) when
a burst of packets fills the ring, followed by a large USO packet that
can't fit. For larger rings, the delta between the completion
suppression threshold and the BDs required for SW USO is large enough
that completions will fire and this case is unreachable.
This issue was pointed out by Sashiko and while it seems fairly unlikely
given that the queue size must be small to trigger this, it is indeed
possible.
Fix this by tracking the last BD which deferred completions and
centralizing the logic for deciding when to ring the doorbell. The NO_CMPL
bit is now cleared in bnxt_txr_db_kick(), so every doorbell site is
covered, including the SW USO early exit. This guarantees the ring always
ends in a BD which generates a completion to clean it and wake the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak dqacct if rhashtable insertion fails
LOLLM observes that xqcheck_mod_live_ino_dqtrx doesn't free the newly
allocated dqa object if rhashtable insertion fails. Fix this leak. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: autofs: fix memory leak in autofs_fill_super()
In autofs_fill_super(), we create a new inode using
autofs_new_ino(), however, if we fail to create root_inode,
(that is, root_inode failure path), we return -ENOMEM without
freeing the new inode(ino) that we created causing a memory leak.
Fix this by adding autofs_free_ino() to free the inode we created
in root_inode failure path before returning ENOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails
LOLLM observes that in xfs_btree_bload_prep_block,
xfs_btree_bload_drop_buf can hit an IO error if writing the delwri
buffer list to disk fails. In this case, we fail to release new_bp,
which means we lose a locked buffer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing kunmap in afs_dir_search_bucket()
Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:"
path. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: return compat ioctl results directly
The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but
then calls the native handler. Their different command sizes make native
dispatch return -ENOIOCTLCMD.
For GET_FD, this overwrites receive_fd()'s return value after the
descriptor is installed, leaking one fd per call. Return handled compat
results directly and use native dispatch only for other commands. |
| A command injection vulnerability exists in CLI of the affected HPE Networking Instant ON APs that could allow an unauthenticated adjacent attacker to perform command injection by sending specially crafted packets. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Command injection vulnerabilities exist in the affected interface of HPE Networking Instant ON that could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user could cause a memory leak in error paths leading to kernel memory exhaustion. A successful exploit of this vulnerability might lead to denial of service. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where a user could cause uncontrolled resource consumption by exhausting the DRM VMA offset address space. A successful exploit of this vulnerability might lead to denial of service. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where a user could cause uncontrolled kernel log generation by repeatedly invoking an interface that emits unrate-limited error messages. A successful exploit of this vulnerability might lead to denial of service. |
| The TFTP server accepts a DATA datagram of any size. The dispatcher rejects datagrams shorter than
four bytes (nxd_tftp_server.c:1037) and nothing anywhere checks an upper bound, in particular not
against the protocol maximum of 4 + NX_TFTP_FILE_TRANSFER_MAX. Two things follow from that one
missing check, both reachable before any authentication because TFTP has none.
The handler passes `nx_packet_length - 4` straight to FileX:
```c
/* addons/tftp/nxd_tftp_server.c:1863, 1889 */
status = nx_packet_copy(packet_ptr, &temp_ptr,
server_ptr -> nx_tftp_server_packet_pool_ptr, NX_WAIT_FOREVER);
...
fx_file_write(&(client_request_ptr -> nx_tftp_client_request_file),
packet_ptr -> nx_packet_prepend_ptr + 4,
packet_ptr -> nx_packet_length - 4);
```
`nx_packet_length` is the length of a chain, not of one contiguous buffer, so FileX copies past the
end of the first packet:
```
ERROR: AddressSanitizer: heap-buffer-overflow
READ of size 1280 at 0x621000001108 thread T5
#0 __interceptor_memcpy
#1 _fx_utility_memory_copy filex/common/src/fx_utility_memory_copy.c:78
0x621000001108 is 0 bytes to the right of 4104-byte region
```
Those bytes are written into the file the attacker is uploading, and a TFTP read request hands them
back, so this is a memory disclosure with a convenient retrieval channel.
The same datagram also wedges the server. `nx_packet_copy` at :1863 needs
ceil(nx_packet_length / pool_payload) packets and asks for them with NX_WAIT_FOREVER, so when the
attacker sizes the datagram beyond what the pool holds, the server thread suspends and never
returns. A liveness probe after one such datagram times out with the pool at 0 of 12 packets and
the server thread suspended, and no later client is served.
Reject `nx_packet_length > 4 + NX_TFTP_FILE_TRANSFER_MAX` in the DATA branch before either call,
and use a bounded wait rather than NX_WAIT_FOREVER for the copy. |
| Server-side memory exhaustion in Apache MINA SSHD 1.0.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5, component sshd-sftp, in the SFTP v6 check-file-name/check-file-handle extension. Apache MINA SSHD is a Java library for client-side and server-side SSH.
Using a very small "block size" (for instance 256, which is the minimum) on a huge file generates many (file size / block size) hashes. The resulting SFTP reply message was accumulated fully in memory server-side, which could, with a suitably large (possibly sparse) file exhaust the server-side memory, taking down the server.
Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue by imposing a maximum limit on the size of the reply. Many SFTP implementations have a general limit on the size of SFTP messages anyway; typically 256kB as in OpenSSH or also in Apache MINA SSHD. |
| Russh is a Rust SSH client and server library. Prior to 0.63.2, an authenticated remote peer can send SSH_MSG_KEXINIT without the required SSH_MSG_KEX_ECDH_INIT and then flood SSH_MSG_CHANNEL_OPEN messages while SessionKexState::InProgress prevents priority_receiver in russh/src/server/session.rs from being drained. The server continues processing network input and enqueues a ChannelOpenReply for each request on an unbounded channel, allowing one connection to grow memory until the process is terminated. This issue is fixed in version 0.63.2. |
| The CODESYS Gateway Client allocates memory based on a size field in a gateway response without enforcing an appropriate upper limit. An unauthenticated remote attacker controlling a malicious gateway can exploit this behavior to trigger excessive memory consumption, resulting in a denial-of-service condition thus leading to a total loss of availablity. |
| A flaw has been found in zosmaai pi-llm-wiki up to 0.11.7. Affected is an unknown function of the file mcp/index.ts of the component wiki_capture_source MCP tool. Executing a manipulation of the argument url can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. Upgrading to version 0.11.8 is able to address this issue. This patch is called 360867034e79175b45c8e04a98e4ca712bbaca35. Upgrading the affected component is advised. |
| Possible memory exhaustion in SFTP clients (DefaultSftpClient) in component sshd-sftp in Apache MINA SSHD versions 0.9.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5.
Apache
MINA SSHD is a Java library for client-side and server-side SSH. The sshd-sftp component provides support for SFTP.
The SFTP client implementation, when receiving a reply, did not check that this reply corresponded to a request sent earlier. Unsolicited replies would be stored but never consumed. A malicious server could keep sending unsolicited replies until available memory in the client was exhausted.
Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue. |
| Improper restriction of recursive entity references in DTDs ('XML entity expansion') vulnerability in Apache Sling XSS.
This issue affects Apache Sling XSS: before 2.4.12.
Users are recommended to upgrade to version 2.4.12, which fixes the issue. |
| Uncontrolled resource consumption in component ssd-scp in Apache MINA SSHD versions up to 2.19.0 or 3.0.0-M1 to 3.0.0-M5. Apache MINA SSHD is a Java library for client-side and server-side SSH.
Component sshd-scp of Apache MINA SSHD provides a Java implementation of SCP. The SCP command protocol is line-oriented with LF-terminated lines. The protocol handler in sshd-scp did not impose any limit on the length of such protocol lines. A malicious peer just sending a junk command containing a never-ending sequence of characters but never a LF would cause the receiver to allocate memory to store this whole junk command, exhausting memory and crashing the application with an OutOfMemoryError.
Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue by enforcing an upper limit on the length of SCP protocol lines. |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits, and Uncontrolled Recursion in the Java implementation of Apache PLC4X (PLC4J) allow a malicious or impersonated device to exhaust the memory or stack of the client application, causing a denial of service.
In the OPC UA driver these defects are reachable before authentication: the offending data is parsed while the secure channel and session are being established, before the server's identity has been bound to it. Configuring a trusted server therefore does not prevent exploitation by an attacker who can
impersonate it.
The individual defects are:
- Length-prefixed byte strings are allocated at the size claimed on the wire before the length is checked against the data actually received (0.10.0 through 0.13.1).
- Array fields in generated protocol parsers pre-allocate a list with the element count claimed on the wire, allowing a single count field to trigger a multi-gigabyte allocation. This parser is shared by all PLC4J drivers; the OPC UA driver is the verified pre-authentication path (0.10.0 through 0.13.1).
- The OPC UA driver accumulates message chunks without enforcing the negotiated maximum chunk count and message size (0.12.0 through 0.13.1).
- The OPC UA driver pre-allocates collections using element counts received from the server (0.10.0 through 0.13.1).
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Go implementation is covered by CVE-2026-102510 https://cveprocess.apache.org/cve5/CVE-2026-102510 .
This issue affects Apache PLC4X: from 0.10.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
