| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. |
| An issue in the Leptonica linked library (v1.79.0) allows attackers to cause an arithmetic exception leading to a Denial of Service (DoS) via a crafted JPEG file. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memcg: stop reclaim when a limit update is superseded
kernfs serializes file operations only per open file, so separate open
files can update the same memory.high or memory.max file concurrently.
Both handlers store the new limit before synchronous reclaim, but continue
to use the writer's local target in the reclaim loop. If another writer
raises or removes the limit, the first writer can continue reclaiming
toward a stale target.
For memory.max, this can leave the writer looping indefinitely once
reclaim retries are exhausted. The OOM path sees sufficient margin under
the current limit and returns true without killing, while the writer still
compares usage against its stale target and records another OOM event.
Check the current limit at the start of each reclaim iteration and stop if
it no longer matches the writer's target.
Reproducer:
Populate a cgroup with anonymous memory and disable swapping. Lower
memory.max from one open file, then restore it to "max" through another
open file after the new limit becomes visible.
Without the patch, the first writer remains blocked and repeatedly
increments the OOM event counter. With the patch, it returns normally.
This was not motivated by a reported production workload. We found it
through automated randomized testing for our cgroup observability work
and reduced it to the reproducer above. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Reset write verifier when async COPY writeback fails
Async COPY captures nn->writeverf at request time and reports it to
the client via CB_OFFLOAD after the worker kthread completes. When
the post-copy vfs_fsync_range() or filemap_check_wb_err() in
_nfsd_copy_file_range() reports an error, the worker correctly
leaves NFSD4_COPY_F_COMMITTED clear so that CB_OFFLOAD encodes
wr_stable_how as NFS_UNSTABLE, but the server's write verifier is
not rotated.
A client that receives NFS_UNSTABLE in CB_OFFLOAD follows up with
COMMIT to make the copied data durable. With the verifier
unchanged, COMMIT returns the same value the client just received
via CB_OFFLOAD, and the client concludes the copy is durable --
silently dropping the data whose writeback in fact failed. This
violates the UNSTABLE+COMMIT durability contract (RFC 7862 section
15.1, RFC 8881 section 18.32) and matches the bug just fixed in
nfsd_vfs_write() and nfsd_commit().
Rotate nn->writeverf at the writeback-failure site. The async COPY
worker has no svc_rqst, so commit_reset_write_verifier() is not
available here; calling nfsd_reset_write_verifier() directly
mirrors the trace-less reset already used by
nfsd_file_check_write_error() for the same purpose. Filter out
-EAGAIN and -ESTALE, matching commit_reset_write_verifier(), since
neither indicates a durable-storage failure. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: sample writeback error cursor before async COPY loop
_nfsd_copy_file_range() samples dst->f_wb_err into "since"
after the copy loop, then uses it to detect writeback errors
via filemap_check_wb_err() once vfs_fsync_range() returns.
Because the nfsd_file cache reuses a single struct file
across requests targeting the same inode, a concurrent
COMMIT or stable WRITE on dst advances dst->f_wb_err to the
current mapping->wb_err via file_check_and_advance_wb_err()
during its own vfs_fsync_range(). If that advancement lands
between the writeback error appearing in mapping->wb_err
and the COPY worker sampling "since", the worker captures
the already-advanced cursor, errseq_check() sees cur ==
since and returns zero, and NFSD4_COPY_F_COMMITTED is set
even though writeback failed. CB_OFFLOAD then encodes
wr_stable_how = FILE_SYNC4, the client treats the copied
data as durable, and the failure becomes silent data loss.
Sample since once at the start of the function. The cursor
then reflects state in effect before this COPY issues any
writes, and filemap_check_wb_err() detects any error that
occurs during the copy regardless of which thread first
observes it. This matches the pattern used by
nfsd_vfs_write() and nfsd4_clone_file_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: Fix stale object mask after concurrent mark updates
When a mark gets a new event bit, fanotify and inotify may avoid
recalculating the object mask if the cached aggregate already contains that
bit. This is racy with a recalculation triggered by a concurrent update to
another mark on the same connector.
The concurrent scan can read the mark before the new bit is added, while
the updater reads the old aggregate before that scan publishes its result.
The updater then skips recalculation and the scan publishes a mask without
the bit, leaving the object mask stale after both updates complete.
This can be reproduced with two fanotify groups watching the same inode:
one thread removes FAN_MODIFY from one existing mark while another thread
adds FAN_MODIFY to the other mark. After both fanotify_mark() calls return,
writes can fail to produce FAN_MODIFY for the group whose mark now contains
the bit. This was reproduced on an unmodified v6.12.95 kernel. The
equivalent inotify interleaving loses IN_MODIFY events.
For normal fanotify additions, recalculate whenever the raw mark mask
changes. The normal mask is not cleared asynchronously, so an unchanged
addition cannot introduce missing interest. Always recalculate ignore-mask
updates because FS_MODIFY handling may clear the ignore mask without taking
mark->lock, making snapshot comparisons unreliable.
Always recalculate after updating an existing inotify watch. Its replace
path temporarily sets mark->mask to zero, so a concurrent scan can observe
zero even when the old and final masks are equal. Assigning the replacement
mask directly would avoid the transient zero, but existing-watch updates
are infrequent, so unconditional recalculation is simpler. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Lock the handler in ucma_set_ib_path()
ucma_set_ib_path() calls ucma_event_handler() straight from the write()
path, without the handler lock that keeps ctx->file stable while a uevent
is queued. The handler re-reads ctx->file for every dereference:
mutex_lock(&ctx->file->mut); /* file A */
list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */
mutex_unlock(&ctx->file->mut); /* file B */
wake_up_interruptible(&ctx->file->poll_wait); /* file B */
A concurrent ucma_migrate_id() reassigns ctx->file while the SET_OPTION
caller sleeps in mutex_lock(), so the list_add_tail() lands on file B's
event_list while only file A's mutex is held, racing every other user of
that list:
BUG: KASAN: slab-use-after-free in __list_add_valid_or_report+0x1aa/0x1c0
Read of size 8 at addr ffff888153c6a418 by task poc_corr/486
Call Trace:
__list_add_valid_or_report+0x1aa/0x1c0
ucma_event_handler+0x1be/0xc00
ucma_set_ib_path+0x45e/0x710
ucma_set_option+0x32e/0x590
ucma_write+0x1f9/0x330
Allocated by task 505:
ucma_write_cm_event+0x1a1/0x660
Freed by task 505:
kfree+0x1da/0x4c0
ucma_get_event+0x5d5/0x7e0
The freed object is a ucma_event that another thread dequeued from file B's
list under file B's mutex. File A's mut is left held on top of that,
wedging its next writer in uninterruptible sleep.
This path needs a bound and address-resolved cm_id, so it requires an RDMA
device to be present.
Take the handler lock around the call. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ucs1002: fix use-after-free on remove
ucs1002 has no remove callback, so unbind runs entirely through devm.
The alert IRQ handler queues the health_poll delayed work, and the work
reschedules itself while the chip reports a bad-health condition. devm
frees the alert IRQ, which only synchronizes the handler; it does not
cancel the delayed work, which can then run after devm frees the driver
data and dereference it.
Register health_poll with devm_delayed_work_autocancel() before the
alert IRQ is requested. devm then frees the IRQ before cancelling the
work, so the handler can no longer queue it and the work is cancelled
before the driver data is freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
iso_conn_ready() looks up the BIS listener socket with iso_get_sock(),
which takes a reference, and then, without re-checking its state,
creates a child socket from it:
parent = iso_get_sock(hdev, ...);
if (!parent)
return;
lock_sock(parent);
sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...);
...
iso_chan_add(conn, sk, parent);
...
release_sock(parent);
sock_put(parent);
If the listener socket is closed concurrently, between iso_get_sock()
and lock_sock(), the reference taken by iso_get_sock() may be the last
one: the close path drops the link-list reference, and once
iso_conn_ready() drops its own reference at the end of the function the
socket is freed. The child socket, however, is already linked to the
freed parent, and a later disconnect of the child runs iso_chan_del()
-> bt_accept_unlink(), which dereferences the dangling parent pointer
into the freed accept queue (a use-after-free). The same dangling
pointer is also dereferenced through parent->***() in
iso_chan_del().
Fix it the same way the connected (non-BIS) path was fixed in commit
0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"):
after taking the socket lock, re-check that the parent is still a
listening, alive socket, and bail out otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_folio() to wait on writeback
Fix netfs_read_folio() to wait for an ongoing writeback to complete so that
it can trust the dirty flag and whatever is attached to folio->private
(folio->private may get cleaned up by the collector before it clears the
writeback flag). |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
The generic/642 test-case can reproduce the kernel crash:
[40243.605254] ------------[ cut here ]------------
[40243.605956] kernel BUG at fs/ceph/xattr.c:918!
[40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI
[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)
[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[40243.611820] Workqueue: ceph-msgr ceph_con_workfn
[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0
[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc
[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287
[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000
[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000
[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000
[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000
[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd
[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000
[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0
[40243.627408] Call Trace:
[40243.627839] <TASK>
[40243.628188] __prep_cap+0x3fd/0x4a0
[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0
[40243.629474] ceph_check_caps+0x46a/0xc80
[40243.630094] ? __lock_acquire+0x4a2/0x2650
[40243.630773] ? find_held_lock+0x31/0x90
[40243.631347] ? handle_cap_grant+0x79f/0x1060
[40243.632068] ? lock_release+0xd9/0x300
[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340
[40243.633429] ? lock_release+0xd9/0x300
[40243.634052] handle_cap_grant+0xcf6/0x1060
[40243.634745] ceph_handle_caps+0x122b/0x2110
[40243.635415] mds_dispatch+0x5bd/0x2160
[40243.636034] ? ceph_con_process_message+0x65/0x190
[40243.636828] ? lock_release+0xd9/0x300
[40243.637431] ceph_con_process_message+0x7a/0x190
[40243.638184] ? kfree+0x311/0x4f0
[40243.638749] ? kfree+0x311/0x4f0
[40243.639268] process_message+0x16/0x1a0
[40243.639915] ? sg_free_table+0x39/0x90
[40243.640572] ceph_con_v2_try_read+0xf58/0x2120
[40243.641255] ? lock_acquire+0xc8/0x300
[40243.641863] ceph_con_workfn+0x151/0x820
[40243.642493] process_one_work+0x22f/0x630
[40243.643093] ? process_one_work+0x254/0x630
[40243.643770] worker_thread+0x1e2/0x400
[40243.644332] ? __pfx_worker_thread+0x10/0x10
[40243.645020] kthread+0x109/0x140
[40243.645560] ? __pfx_kthread+0x10/0x10
[40243.646125] ret_from_fork+0x3f8/0x480
[40243.646752] ? __pfx_kthread+0x10/0x10
[40243.647316] ? __pfx_kthread+0x10/0x10
[40243.647919] ret_from_fork_asm+0x1a/0x30
[40243.648556] </TASK>
[40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore
[40243.654766] ---[ end trace 0000000000000000 ]---
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__bui
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: don't auto enable misc vector
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq.. |
| In the silabser.sys Windows 8 driver for CP210x devices, a local unprivileged user can use incorrect driver settings to cause a kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: cancel pending mlo_pm_work
If the device is reset, suspended or unregistered within that window,
the pending work can still run and access vif/bss data that may already
be freed, or send MCU commands while the firmware is not available.
Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown
and suspend paths:
- mt7925_mac_reset_work() (chip reset recovery)
- mt7925e_unregister_device() (PCIe unbind)
- mt7925_pci_suspend() (PCIe bus suspend)
- mt7925_suspend() (mac80211 suspend)
- mt7925u_suspend() (USB bus / runtime suspend)
This ensures the work is stopped before the device state becomes
invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Handle pick_task() releasing the rq lock
Core scheduling's pick_next_task() breaks when a ->pick_task()
implementation can release the rq lock. The selection state derived on entry
is only valid while the lock is held continuously. Once a pick can drop the
lock, an interleaving selection can invalidate all of it: the single-CPU
fast path can commit an uncookied pick although the core went cookied during
the release, and forceidle committed by the interleaving selection skews the
restarted pass's accounting.
Fix it by restarting the whole selection when a pick returns RETRY_TASK
after releasing the lock: a single restart point above the state derivation
replaces the per-loop restart labels, so a retry picks up state committed by
interleaving selections and accounts and resets forceidle like a fresh
selection would.
need_sync and fi_before latch across retries. Clock validity can't be
re-derived - there is no program-ordered way to tell whether the own and
core rq clocks are still updated after the lock was released, as other
lockers' pin cycles may or may not have invalidated them. When restarting,
clear core_clock_updated so that the sibling loop re-updates the core rq,
and update the own rq clock if invalidated. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Lock the handler in ucma_write_cm_event()
ctx->file may only be changed under the handler lock and the xa_lock, which
is what stops uevents being queued for a ctx while ucma_migrate_id() moves
it to another file. The CM core takes that lock before invoking
ucma_event_handler(), but the write() paths that queue uevents themselves
do not.
ucma_write_cm_event() re-reads ctx->file for each of its four dereferences,
so ucma_migrate_id() can swap it mid-sequence:
mutex_lock(&ctx->file->mut); /* file A */
list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */
mutex_unlock(&ctx->file->mut); /* file B */
wake_up_interruptible(&ctx->file->poll_wait); /* file B */
The window is the mutex_lock() itself: the writer sleeps in it while the
migration reassigns ctx->file. The list_add_tail() then runs on file B's
event_list holding only file A's mutex:
list_add corruption. prev->next should be next (ffff888101320f30),
but was ffff88814a08c418. (prev=ffff88814a075c18).
kernel BUG at lib/list_debug.c:32!
Call Trace:
ucma_write_cm_event+0x36e/0x5e0
and file A's mut is left held forever, wedging its next writer in D state.
The uevent is also stranded on a list ucma_cleanup_ctx_events() will not
walk, so it outlives its context. /dev/infiniband/rdma_cm is 0666 and no
RDMA device is involved, so an unprivileged user reaches all of this.
Take the handler lock, as ucma_cleanup_mc_events() does; ctx->cm_id is
pinned by the ucma_get_ctx() reference. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return
SCX_RQ_BAL_KEEP tells the pick to keep running the previous task, a leftover
from when balancing and picking were separate operations. An rq-level flag
only works while dispatches and picks pair up one to one, which core
scheduling breaks: selections interleave through dispatch's lock drops and a
pick can consume a stale flag, keeping a task that has since been dequeued.
Fixing core scheduling support requires the decision to travel with the
dispatch that made it. Make scx_dispatch_sched() and balance_one() return an
explicit verdict instead and drop the flag's plumbing from the tools autogen
enum headers.
Also factor the pick-side invocation, its follow-up queueing and the
post-dispatch checks out of do_pick_task_scx() into dispatch_pick(). No
functional changes intended.
v2: Drop the SCX_RQ_BAL_KEEP plumbing from the tools autogen enum headers
as well (Andrea). |
