| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An integer underflow was addressed with improved input validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An attacker with control of a network file server may be able to cause unexpected system termination. |
| An integer overflow vulnerability in the license manager service could allow an unauthenticated attacker to crash the service. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: reject invalid and unexpected GRP_ACK_MSG to prevent bc_ackers underflow
Commit 48a5fe38772b ("tipc: fix bc_ackers underflow on duplicate
GRP_ACK_MSG") rejected duplicate/stale ACKs in tipc_group_proto_rcv()
by returning early when less_eq(acked, m->bc_acked).
However, that check remains incomplete in two ways:
1. When grp->bc_ackers is zero (e.g. on a quiet group, when replicast
ACKs were not requested, or after all expected members have already
acknowledged), an unexpected GRP_ACK_MSG with acked > m->bc_acked
passes less_eq() and unconditionally decrements grp->bc_ackers.
Because bc_ackers is a u16, this wraps to 65535, causing
tipc_group_bc_cong() to permanently report congestion and blocking
all future group broadcasts on the socket.
2. During an active broadcast round (grp->bc_ackers > 0), the sender
transmits packet S and advances grp->bc_snd_nxt to S + 1. Receivers
increment their expected counter to S + 1 upon consuming packet S,
so the only valid ACK value for the current round is strictly
acked == grp->bc_snd_nxt.
However, tipc_group_update_bc_members() initializes each member's
m->bc_acked to prev = grp->bc_snd_nxt - 1 (S - 1 before increment).
This leaves a 2-sequence gap (S - 1 to S + 1) in sequence space.
An incoming ACK is therefore neither rejected as duplicate nor
prevented from decrementing grp->bc_ackers if an unexpected or stale
value (such as S) is received. A member sending acked = S followed
by acked = S + 1 could decrement grp->bc_ackers twice in the same
round, prematurely clearing bc_ackers or underflowing it.
Fix this by:
- Dropping GRP_ACK_MSG immediately if grp->bc_ackers is zero.
- Requiring acked == grp->bc_snd_nxt and rejecting duplicates where
m->bc_acked == acked. Because replicast broadcast rounds are strictly
sequential, only grp->bc_snd_nxt can be acknowledged, and each member
can acknowledge at most once per round.
Note that a related pre-existing issue in tipc_group_delete_member()
(where grp->bc_ackers decrementing to zero upon member departure does
not restore *grp->open or trigger a socket wakeup) will be addressed
in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ISO15693 inventory length
The ISO15693 inventory helper removes a two-byte prefix without checking
that it exists, then accepts a one-byte remainder before reading data[1] as
the DSFID.
Require the prefix and at least two remaining bytes before copying the UID
data and reading the DSFID. |
| A Cross-Site WebSocket Hijacking vulnerability in Cloud Shell prior to 2026-07-22 on Google Cloud Platform allows an unauthenticated attacker to hijack an active Cloud Shell session and exfiltrate the user's OAuth access token using a cross-origin WebSocket request.
This vulnerability was patched on 22 July 2026, and no customer action is needed. |
| Mounting an attacker-controlled FAT image with fault tolerance enabled causes an out-of-bounds heap write during log replay. The write is attacker-positioned and attacker-valued, and on a common embedded memory layout it reaches the FX_MEDIA driver callback, giving control of the instruction pointer. |
| A HID report descriptor is a sequence of items, each declaring in its header how many data bytes follow. The USBX host walks that sequence by advancing over each header and parsing the data behind it.
The walk checked that an item fitted in the descriptor only **after** it had advanced past the header and parsed the payload, and the item analysis it relied on never measured the declared sizes against the bytes actually received. A HID peripheral returning a short report descriptor therefore drove a heap out-of-bounds read during ordinary enumeration. |
| A VideoStreaming interface reports the size of its whole class-specific descriptor block in the `wTotalLength` field of its input header. The USBX host recorded that figure and used it as the budget for walking the format, frame and frame-interval descriptors, without holding it against the configuration descriptor actually received.
A device that reports a `wTotalLength` larger than the descriptors it supplies therefore had its own claim believed. Once the real bytes ran out the walk kept going, dereferencing the cursor past the end of the configuration buffer, in the host's context, whenever the application queried format or frame data. |
| A malicious USB MTP/PTP device can cause the USBX host to read past a heap buffer during ordinary object enumeration, leaking adjacent heap contents to the application or faulting on an unmapped page. |
| A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes.
The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied.
A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back. |
| The Cortex-A7 MMU Modules port validates a caller-supplied buffer by translating **one address** — the first byte. The common Module Manager hands its range check the module instance, the start address and the complete byte size; the Cortex-A7 implementation discarded the instance and the size and asked the MMU a single question about the start.
A memory-protected module therefore passed any range whose first byte was user-readable, however far the rest of it reached. Privileged dispatch code then read or wrote the whole range. Because every protected-module dispatcher that consumes a buffer or an extra-parameter array goes through this one macro, the defect is not in any individual service: it is in the primitive all of them rely on. |
| A ThreadX module reaches a kernel object's delete service through the Module Manager's dispatch layer, which asked one question about the pointer: does the object lie outside the module's own code and data. That is the policy for *using* an object, and using an object a module does not own is supported and intended — `txm_module_object_pointer_get_extended` searches the system's created objects by name and hands back objects the application created and objects other modules created, so that a module can send to a shared queue, take a shared semaphore or get a shared mutex.
Destroying one of those is not sharing it. A module could name any object it had a pointer to and have the privileged dispatcher delete it. |
| A Stack-based Buffer Overflow vulnerability in the kmd component of Juniper Networks Junos OS on MX Series allows an unauthenticated network attacker to execute code as root via specific IKE certificate-based packets.
This issue requires IKE to be enabled with an RSA-signature IKE policy to be vulnerable.
This issue affects Junos OS on MX Series:
* All versions before 21.2R3-S11;
* from 21.4 before 21.4R3-S12;
* from 22.2 before 22.2R3-S8;
* from 22.3 before 22.3R3-S5;
* from 22.4 before 22.4R3-S9; |
| The Module Manager's object lookup validated one byte of a memory-protected module's search name and then walked as much of it as the module declared, in privileged mode, with the kernel's preemption count raised. Both lookup dispatchers are affected: the recommended `txm_module_object_pointer_get_extended` is handed a length and does not use it to bound the buffer, and the deprecated `txm_module_object_pointer_get` supplies the largest value a `UINT` can hold, so it removes the bound rather than lacking one.
A module can make the walk unbounded without knowing anything about the memory it reaches, and where the walk reaches memory a privileged read cannot take, the resulting fault leaves the kernel unable to preempt for the rest of the system's life.
Vulnerable functions: `_txm_module_manager_txm_module_object_pointer_get_dispatch`, `_txm_module_manager_txm_module_object_pointer_get_extended_dispatch` (both in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`) and `_txm_module_manager_object_name_compare` (`common_modules/module_manager/src/txm_module_manager_util.c`). |
| The Module Manager's block-pool create dispatcher proved that two `ALIGN_TYPE` words of the extra-parameter array a memory-protected module supplies lay inside the module's data, and then used indices 0 through 3 of that array.
One of the two unproved words is read by the dispatcher's own buffer check, which takes index 1 as the pool start and index 2 as the length to range-check it over. So the out-of-bounds read is performed by the validation code itself, before the kernel service is reached, and the size the caller's pool start is then validated against is a word the manager has not proved the module owns. The other unproved word is read when the service's argument list is built.
Vulnerable function: `_txm_module_manager_tx_block_pool_create_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`. |
| A ThreadX module chooses `object_size` when it calls `txm_module_object_allocate`. The Module Manager adds its own 16-byte private header to that size and asked the object pool for the result **without checking the addition**. A size near the top of a `ULONG` wrapped, the pool served a block far smaller than the header, and the manager then wrote the header past the end of it and into the neighbouring byte-pool block. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 1.1.0 of db-connect and 4.33.0 of ApostropheCMS, an account with view-draft access can submit a projection exclusion path that traverses through a constructor prototype chain to a shared prototype member when a consumer uses a SQLite, PostgreSQL, or multipostgres adapter and has a matching document. Every editing role has view-draft access, while guestApiAccess broadens this prerequisite to any logged-in account. The unsetNestedField helper then deletes the shared runtime member, causing persistent process-wide integrity and availability effects; the default MongoDB adapter is not affected. This issue is fixed in db-connect 1.1.0 and ApostropheCMS 4.33.0. |
| Acrobat for Edge is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must visit a maliciously crafted URL or interact with a compromised web page. |
| When curl is built with GnuTLS, a malicious WebSocket server can make curl
send memory past its send buffer. This is due to an out of bounds read
following when `gnutls_record_send()` returns a number of bytes sent **greater
than the number of bytes it was given to send**. GnuTLS does that after a
blocked send. |
