| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: bound the peer rkey counts in SMC-Rv2 LLC messages
On a link whose device has max_recv_sge == 1 there is no shared v2 receive
buffer, and smc_llc_save_add_link_rkeys() takes the v2 extension from 44
bytes past the start of the queue entry's inline message:
ext = (struct smc_llc_msg_add_link_v2_ext *)(llc_msg + SMC_WR_TX_SIZE);
The entry is a 72-byte allocation and the extension starts at offset 68, so
ext->num_rkeys at offset 94 is already past it. This happens on every
SMC-Rv2 link addition, whatever the peer sends:
[ 2.490065] BUG: KASAN: slab-out-of-bounds in smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490431] Read of size 2 at addr ffff8880056406de by task smctest/106
[ 2.490709]
[ 2.490792] CPU: 0 UID: 0 PID: 106 Comm: smctest Not tainted 7.2.0-rc5-p1-g77a5d9d9c99f #32 PREEMPT(lazy)
[ 2.490795] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.490798] Call Trace:
[ 2.490803] <TASK>
[ 2.490805] dump_stack_lvl+0x53/0x70
[ 2.490810] print_report+0xd0/0x630
[ 2.490828] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.490832] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490834] kasan_report+0xce/0x100
[ 2.490836] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490837] smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490839] ? smcr_buf_map_lgr+0x1bf/0x2b0
[ 2.490844] smc_llc_cli_add_link+0xca7/0x1e80
[ 2.490848] ? smc_llc_wait+0x355/0x810
[ 2.490850] ? __pfx_smc_llc_wait+0x10/0x10
[ 2.490851] ? __pfx_smc_llc_cli_add_link+0x10/0x10
[ 2.490853] ? __pfx_autoremove_wake_function+0x10/0x10
[ 2.490863] __smc_connect+0x3f5c/0x4980
[ 2.490873] ? __pfx_kernel_connect+0x10/0x10
[ 2.490888] ? __pfx___smc_connect+0x10/0x10
[ 2.490891] ? release_sock+0x148/0x1d0
[ 2.490894] smc_connect+0x42c/0x580
[ 2.490896] __sys_connect+0xfc/0x130
[ 2.490898] ? __pfx___sys_connect+0x10/0x10
[ 2.490900] ? handle_mm_fault+0x1a1/0x430
[ 2.490908] __x64_sys_connect+0x6d/0xb0
[ 2.490909] ? fpregs_assert_state_consistent+0x56/0xe0
[ 2.490917] do_syscall_64+0xf9/0x540
[ 2.490921] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2.490924] RIP: 0033:0x421bb4
[ 2.490927] Code: ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d ad 34 09 00 00 74 13 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 55
[ 2.490929] RSP: 002b:00007ffd473b01a8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
[ 2.490935] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000421bb4
[ 2.490936] RDX: 0000000000000010 RSI: 00007ffd473b01d0 RDI: 0000000000000003
[ 2.490937] RBP: 0000000000003930 R08: 0000000000000004 R09: 0000000000000000
[ 2.490938] R10: 00007ffd473b0f98 R11: 0000000000000202 R12: 0000000000000006
[ 2.490939] R13: 00007ffd473b0f87 R14: 0000000000000003 R15: 00007ffd473b0f90
[ 2.490940] </TASK>
[ 2.490941]
[ 2.499545] Allocated by task 44:
[ 2.499693] kasan_save_stack+0x33/0x60
[ 2.499860] kasan_save_track+0x14/0x30
[ 2.500026] __kasan_kmalloc+0x8f/0xa0
[ 2.500190] __kmalloc_cache_noprof+0x158/0x370
[ 2.500393] smc_llc_enqueue+0x72/0x560
[ 2.500559] smc_wr_rx_tasklet_fn+0x474/0xa80
[ 2.500747] tasklet_action_common+0x20f/0x8a0
[ 2.500945] handle_softirqs+0x18e/0x590
[ 2.501115] do_softirq+0x3b/0x60
[ 2.501266] __local_bh_enable_ip+0x61/0x70
[ 2.501446] __alloc_skb+0x732/0x890
[ 2.501604] rxe_init_packet+0x16b/0x4f0
[ 2.501783] prepare_ack_packet+0xb8/0x830
[ 2.501962] rxe_receiver+0x495/0x96e0
[ 2.502125] do_work+0x144/0x470
[ 2.502269] process_one_work+0x633/0x1030
[ 2.502450] worker_thread+0x45b/0xd10
[ 2.50261
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids
rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID
from the 802.11 header and then uses it as an index into
sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID
value, so the result can be in the range 0..15.
rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and
MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the
aggregation state array. Keep the default RTL_AGG_STOP state for
out-of-range TIDs, matching rtl92cu_tx_fill_desc().
This issue was detected by our static analysis tool and confirmed by
manual audit. UBSAN validation for the same bug pattern reports an
array-index-out-of-bounds access with index 10 for type
'rtl_tid_data [9]'. |
| Issue summary: OpenSSL CMS decryption sizes the key-unwrap output buffer based
on querying the unwrapped key size, but the AES-WRAP-PAD unwrap primitive
can write and cleanse more bytes than that query reports, causing an 8-byte
out-of-bounds heap write.
Impact summary: An attacker who supplies a crafted CMS message can trigger a
deterministic 8-byte out-of-bounds heap write when the victim decrypts it
with CMS_decrypt(), corrupting the heap and typically resulting in a Denial
of Service.
CWE: CWE-787: Out-of-bounds Write
Description: The key-wrap OID is potentially attacker-controlled on the wire.
CMS unwrapping allows both id-aesNNN-wrap-pad and id-aesNNN-wrap ciphers.
An attacker can take a legitimate message and change a single OID byte to
select the padded variant while leaving the message otherwise valid. Since
the unwrap key is derived from the recipient's private operation (ECDH key
agreement or ML-KEM decapsulation), the RFC 5649 integrity check cannot
pass, and the decryption fails with integrity failure.
The write is a fixed-size (8-byte), fixed-value (zero) heap overflow
immediately past the allocation, requires no special configuration, and is
reachable from the public CMS_decrypt() function. The consequence is
a heap corruption leading to a Denial of Service. The fix in the CMS code
sizes the unwrap output buffer for the worst case so a failed unwrap cannot
write past the allocation.
FIPS impact: no
As the CMS code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate on-media seg_num against the cache device size
seg_num is read from the crc32c-only superblock, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls it. It sizes
cache->segments[] and is the value every later on-media segment id is
bounded against, yet it is never checked against the device. Because
cache_dev->mapping is the direct map of the pmem, CACHE_DEV_SEGMENT() for
a segment id past the device resolves to ordinary kernel memory beyond
the mapping; a new-cache init reaching such an id has cache_seg_init() ->
cache_dev_zero_range() memset() 12 KiB over that memory -- an
out-of-bounds write into the kernel heap at table load. A zero seg_num
makes the segment allocations ZERO_SIZE_PTR.
Reject a seg_num that is zero, larger than the device can hold, or larger
than PCACHE_CACHE_SEGS_MAX before it is used. |
| The MongoDB BI Connector ODBC Driver converts floating point column values into text without checking that the result fits within the destination buffer. When an application reads a sufficiently large floating point value as text, the driver may write beyond the end of that buffer and corrupt adjacent memory. A user who can store data in a collection read through the BI Connector could use this to crash the application performing the read. |
| PJSIP is a free and open source multimedia communication library written in C. Prior to commit 673b978, a remote out-of-bounds read and write can occur in the SDP negotiator when the remote payload-type map maintenance feature is enabled. assign_pt_and_update_map() in pjmedia/src/pjmedia/sdp_neg.c uses payload-type numbers taken from a remote SDP offer or answer to index fixed-size internal tables without sufficient bounds validation, so a crafted remote SDP can cause memory access outside those tables. The practical impact is memory corruption and denial of service; code execution is not demonstrated. This path is only reached when PJMEDIA_SDP_NEG_MAINTAIN_REMOTE_PT_MAP is enabled. The default is disabled, so default builds are not affected; the feature is an interoperability option that integrating products may enable. This issue has been patched via commit 673b978. |
| Ladybird before commit 2f9dc7e contains a dangling-reference memory-safety flaw in its WebAssembly ESM-integration module loader. When a JavaScript function is imported into a WebAssembly module via the ESM path, WebAssemblyModule.cpp passes a stack-local Wasm::FunctionType by reference to create_host_function, whose host callback captures and later reads that reference; once the ESM link-loop iteration ends the FunctionType is destroyed, leaving the callback with a dangling reference (the normal instantiate path uses a long-lived reference and is not affected). Stale result-type data lets the host callback return an empty result vector for a statically non-empty result, so the destination register retains an attacker-influenced value that is then consumed by the WASM-GC array.set handler, which bit-casts the reference low bits to an ArrayInstance pointer after only a null check, yielding an arbitrary write. A web page can chain this into code execution in the WebContent process. Verified reachable from HTML content without any instrumentation or source modification. |
| Out-of-bounds write in libsaviextractor.so prior to SMR Sep-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| Out-of-bounds write in libcodec2secevrcdec.so prior to SMR Sep-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| Acrobat Reader is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Out-of-bounds write in libmdnie.so prior to SMR Sep-2026 Release 1 allows local attackers to execute arbitrary code with system server privilege. |
| Improper input validation in removing style tag in libsubextractor.so prior to SMR Sep-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| Out-of-bounds write in Keymaster trustlet prior to SMR Sep-2026 Release 1 allows local privileged attackers to write out-of-bounds memory. |
| A memory-handling error in the BSON-to-JSON conversion helpers of the MongoDB C Driver can write a small number of bytes past the end of a heap buffer when a binary field is encoded and the output is cut short at a caller-configured length limit. A party who supplies the document content, with no privileges on the application that links the driver, may cause a small amount of data outside the intended buffer to be altered. |
| HMS Industrial Networks AB eCatcher all versions prior to 6.5.5 is vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute arbitrary code. |
| A buffer overflow vulnerability exists in the Palo Alto Networks GlobalProtectâ„¢ app that enables a man-in-the-middle (MitM) attacker or a rogue gateway to disrupt system processes and potentially execute arbitrary code with elevated privileges (SYSTEM privileges on Windows, and root privileges on macOS and Linux). |