| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default.
In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory.
A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration.
Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes.
This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0. |
| Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| IBM MQ 9.4.5.0 through 9.4.5.1 could allow an authenticated user to cause a denial of service by sending a specially crafted message that crashes consuming applications. |
| Pillow is a Python imaging library. From 5.4.0 until 13.0.0, Pillow performs quadratic copying while parsing GIF comments. GifImageFile._seek() repeatedly appends immutable bytes for comment sub-blocks and multiple comment extensions, and frame zero is parsed during Image.open(). An attacker can submit a small-dimension GIF containing many comment extensions to any application that opens the file. This can consume excessive CPU and deny service before the application can inspect the image. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. From 2.0.0 until 3.14.4, multipart request processing can retain an unbounded number of open file descriptors. An unauthenticated attacker can consequently exhaust file descriptors with specially crafted multipart requests when a handler uses Request.post(). This issue is fixed in version 3.14.4. |
| A malicious, compromised, or MITM-controlled Exchange server can return a single well-formed SOAP response containing an element with enough attributes to keep Thunderbird's main thread CPU-bound for seconds to hours. This vulnerability was fixed in Thunderbird 158 and Thunderbird 153.5. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow takes quadratic time to reserve PDF object identifiers when saving many frames with save_all enabled. PdfParser.next_object_id() repeatedly rebuilds and scans all previously reserved identifiers for every object. An attacker can supply a multi-frame image, including a small APNG with a large declared frame count, to an application that converts it to a multipage PDF. This can consume excessive CPU and deny service. This issue is fixed in version 13.0.0. |
| Grav API plugin (grav-plugin-api) 1.0.40 before 1.0.42 caches a full translation dictionary for every well-formed language code sent to the unauthenticated GET /api/v1/translations/{lang} endpoint, and 1.0.16 before 1.0.42 fails to check target and destination page rules in the sync and batch copy endpoints. Unauthenticated attackers can send small requests that each store about 560 KB to exhaust disk or APCu, while accounts with api.pages.write can overwrite translations or create pages that page-level rules deny. |
| Pillow is a Python imaging library. From 9.2.0 until 13.0.0, Pillow can retain a rejected GIF frame size after a decompression-bomb exception. In GifImageFile._seek, a crafted GIF can leave rejected dimensions stored after Image.DecompressionBombError; if an application catches that exception and continues processing the same image object, later seek or load operations allocate according to those dimensions and can exhaust memory, denying service. This issue is fixed in version 13.0.0. |
| IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM Diamondback Tape Library and IBM Storage TS4500 Library could allow an authenticated user to cause a denial of service using specially crafted SMTP requests that would consume excessive amounts of system resources. |
| A flaw was found in Undertow. A remote attacker could exploit this vulnerability by sending specially crafted WebSocket messages with permessage-deflate negotiated. This could lead to excessive memory consumption due to the PerMessageDeflateFunction.largerBuffer() method using exponential doubling, resulting in a Denial of Service (DoS) for the affected application. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the stream protocol stored the FrameMax value negotiated during the Tune handshake but did not compare it with an inbound frame's declared length before buffering the frame. With the stream plugin enabled, a remote client could therefore cause excessive memory pressure and denial of service by declaring an oversized frame. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the Web STOMP WebSocket handler enforced neither max_frame_size nor login_timeout before authentication, allowing an unauthenticated client to keep a connection alive with a slow stream of small frames and accumulate unbounded pre-authentication state. The rabbitmq_web_stomp plugin must be enabled, and no authentication is required to reach the vulnerable path. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: restore combined single-frag length gate
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, Max-Age processing can overflow and skip closing a connection. An attacker can consequently exhaust the connection pool temporarily until garbage collection resolves the connections. This issue is fixed in version 3.14.4. |
| Lychee is a free, open-source photo-management tool. Prior to 7.7.0, Lychee enables ImageMagick PDF support with Ghostscript but does not apply an effective pre-render limit to PDF page dimensions in ImagickHandler::loadPdf(). An authenticated user who can upload a small PDF with an oversized /MediaBox can cause Imagick::readImage() to consume substantial CPU before failing to produce an image. When QUEUE_CONNECTION selects synchronous processing the request can occupy a web worker, while the official asynchronous Docker configuration can clog the shared image-processing queue and delay other work. The advisory did not identify a Ghostscript sandbox escape. This issue is fixed in version 7.7.0. |
| A flaw was found in DPDK lib/vhost. Memory size is not adequately validated before mmap during vhost memory-region setup, which can lead to a host crash or memory corruption. |
| The Model Context Protocol Python SDK is the official Python SDK for Model Context Protocol servers and clients. In mcp versions before 1.29.1 and from 2.0.0a1 through 2.0.1, the Streamable HTTP session manager, SSE message endpoint, and OAuth authorization-server routes buffer complete HTTP request bodies without enforcing a maximum size. An unauthenticated remote client able to reach an affected endpoint can send a large declared or streamed request body that consumes multiple times the body size in process memory and can repeatedly exhaust memory or terminate the server. Stdio-only servers and deployments with an effective upstream request-size limit are not affected, and applications that use StreamableHTTPServerTransport directly remain responsible for enforcing their own limit. The standard SDK server applications and session managers are fixed in versions 1.29.1 and 2.1.0. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 20.3.32, 21.2.24, and 22.2.0, the @angular/router URL parser stores numeric matrix parameter names and numeric outlet names as properties on initially empty JavaScript objects during Node.js server-side rendering. V8 can interpret these URL-derived keys as array indices and allocate dense backing stores sized to high numeric values, so repeated small path segments cause disproportionate per-segment heap consumption. An unauthenticated attacker can send overlapping requests containing repeated numeric matrix parameters when SSR is enabled, the router directly parses the request URL, and upstream proxies allow semicolons and multiple path segments, eventually exhausting the Node.js old-space heap and terminating the SSR worker. Pure client-side Angular applications are not affected. This issue is fixed in versions 20.3.32, 21.2.24, and 22.2.0. |
