| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: sierra_ms: reject short SWoC info transfers
sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes
from the device via usb_control_msg(), but its callers only treat a
negative return value as failure. A device that answers the
vendor-specific GetSwocInfo request with a short IN transfer is
therefore accepted, leaving the tail of the freshly allocated
(kmalloc(), non-zeroing) swoc_info buffer uninitialized.
truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU
and swocInfo->LinuxVer from that buffer into the world-readable
(0444) "truinst" sysfs attribute. An emulated/malicious USB device
(VID 0x1199, PID 0x0fff) can exploit this to disclose up to 5 bytes
of stale kernel heap memory (kmalloc-64) to unprivileged userspace,
once per sysfs read, indefinitely. On kernels built without
init_on_alloc this leaks recently freed heap contents.
Only accept the transfer when the full structure was received.
sierra_ms_init() already retries failed queries, so well-behaved
devices are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: let stripe batch bm_seq comparison wrap-safe
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Increase kernel stack size to 32kb
For 64-bit Linux kernels, increase the default kernel stack size
(THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been
triggered recently when building the debian vtk9 package with gcc 17:
stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000)
Kernel panic - not syncing: low stack detected by irq handler - check messages
CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE
Tainted: [W]=WARN
Hardware name: 9000/800/rp3440
Workqueue: writeback wb_workfn (flush-259:0)
Backtrace:
[<000000004022f050>] show_stack+0x70/0x90
[<000000004022378c>] dump_stack_lvl+0x124/0x190
[<000000004022382c>] dump_stack+0x34/0x48
[<000000004020212c>] vpanic+0x204/0x648
[<00000000402025c4>] panic+0x54/0x58
[<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440
[<0000000040227070>] intr_return+0x0/0xc |
| In the Linux kernel, the following vulnerability has been resolved:
net: emac: move setting of netops to fix crash
fixes the following crash on driver initialization:
|BUG: Kernel NULL pointer dereference on read at 0x00000158
|Faulting instruction address: 0xc0566b40
|Oops: Kernel access of bad area, sig: 11 [#1]
|BE PAGE_SIZE=4K PowerPC 44x Platform
|Modules linked in:
|CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: GW 7.3.0-rc3+ #1
|Tainted: [W]=WARN
|Hardware name: MyBook Live APM821XX 0x12c41c83 PowerPC 44x Platform
|NIP: c0566b40 LR: c05648f8 CTR: c04c1e9c
|REGS: c1053a20 TRAP: 0300 Tainted: GW (7.3.0-rc3+)
|MSR: 0002b000 <CE,EE,FP,ME> CR: 24008808 XER: 00000000
|DEAR: 00000158 ESR: 00000000
|GPR00: c05648f8 c1053b10 c1063600 c1030000 c5ab3000 00000000 [...]
|GPR08: 00000002 00000000 00000000 c1053b40 84002808 00000000 [...]
|GPR16: cfffd210 00000002 c0beafcc cfffc960 00000000 c1030644 [...]
|GPR24: c0beafbc c1037000 00000000 0000000a 00000000 c1030000 [...]
|NIP [c0566b40] phy_link_topo_add_phy+0x2c/0x1d0
|LR [c05648f8] phy_attach_direct+0x1a4/0x368
|Call Trace:
|[c1053b10] [c0811e04] klist_put+0x54/0xb4 (unreliable)
|[c1053b40] [c05648f8] phy_attach_direct+0x1a4/0x368
|[c1053b70] [c0564ae8] phy_connect_direct+0x2c/0x60
|[c1053b90] [c056c7a8] of_phy_connect+0x50/0x74
|[c1053bc0] [c0572a88] emac_probe+0xd50/0x119c
|[c1053c90] [c04cb770] platform_probe+0x74/0xa4
|[c1053cb0] [c04c8f08] really_probe+0x120/0x2b0
|[c1053cd0] [c04c9254] __driver_probe_device+0x1bc/0x1fc
|[c1053d00] [c04c9334] driver_probe_device+0x38/0xa8
|[c1053d30] [c04c9560] __driver_attach+0xf4/0x10c
|[c1053d50] [c04c6af8] bus_for_each_dev+0x68/0xd0
|[c1053d90] [c04c7c34] bus_add_driver+0xcc/0x1ec
|[c1053dc0] [c04c9f6c] driver_register+0xcc/0x110
|[c1053de0] [c0aa3f40] emac_init+0x1c4/0x200
This bug showed up starting with v7.3-rc1. At the NIP in
phy_link_topo_add_phy() is a netdev_need_ops_lock() check.
This was added by the following
commit ded86da4bbb7 ("net: ethtool: relax ethnl_req_get_phydev() locking assertion")
The bug shows up because at the time of_phy_connect() was called, the
netdev_ops were *not yet* determined. My fix is to move the code that
sets netdev_ops+commac.ops+ethtool_ops further up as emac_init_config()
derives that by looking at the device-tree and sets the required
dev->phy_mode accordingly.
During review, the Sashiko bot's AI stated that the commac assignment
became a dead store. Great catch! To keep the original behavior as-is,
one mentioned option "set dev->commac.ops = &emac_commac_ops only in
the non-gige case?" sounded like a great plan. So the dev->commac.ops
assignment for the non-gige-case moves into the else block.
This patch was tested on a WD MyBook Live (RGMII). the device now works again. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in Windows Update allows an authorized attacker to disclose information locally. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in Windows DNS allows an authorized attacker to disclose information locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to bypass a security feature locally. |
| Heap-based buffer overflow in Windows System Information Console allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Audio Service allows an authorized attacker to elevate privileges locally. |
| Exposure of sensitive system information to an unauthorized control sphere in Windows Kernel allows an authorized attacker to disclose information locally. |
| Use after free in Windows Win32 Kernel Subsystem allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges with a physical attack. |
| Heap-based buffer overflow in Windows Imaging Component allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: remove the fsnotify marks of a mount namespace in process context
mnt_ns_release() drops the last passive reference of a mount namespace
and removes its fanotify marks via fsnotify_mntns_delete(). That takes
the mutex of every group with a mark on the namespace and the spinlock
of the connector. Fine from process context. But mnt_ns_tree_remove()
hands the reference the namespace was allocated with to call_rcu() and
so the marks are removed from the RCU softirq:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:623
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3
__mutex_lock+0x113/0x24b0
fsnotify_destroy_marks+0x11b/0x3d0
mnt_ns_release_rcu+0x57/0xa0
rcu_core+0x6b6/0x1e40
and lockdep complains about the connector lock being taken from softirq
context. A fanotify group with a FAN_MARK_MNTNS mark on the mount
namespace of another task is all that's needed. Root in a user
namespace can do that for a mount namespace it owns. The task exits and
the namespace is freed with the mark still on it.
Remove the marks in free_mnt_ns() before the namespace is handed to RCU.
That runs in process context once the last active reference is gone. A
mark is added through a file descriptor to the namespace which holds an
active reference so no mark can show up after that. |
