| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in SQL Server allows an authorized attacker to disclose information over a network. |
| A flaw was found in cifs-utils. This flaw allows an unprivileged local user to achieve privilege escalation. When a privileged service mounts a Common Internet File System (CIFS) share using a user-controlled credentials file, input values are not properly sanitized before being assembled into mount options. A local attacker can exploit this vulnerability to inject unauthorized mount options, allowing them to bypass permission checks and execute files with administrative (root) privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix XDR padding calculation in ff_encode_getdeviceinfo
nfsd4_ff_encode_getdeviceinfo() computes the da_addr_body reservation
as 16 + netid_len + addr_len, but the subsequent xdr_encode_opaque()
calls emit 8 + round_up(netid_len, 4) + round_up(addr_len, 4) bytes.
The mismatch means the declared da_addr_body length exceeds the actual
encoded data by 2-8 bytes on every flexfile GETDEVICEINFO reply,
leaking stale reply-page content to the client and mis-aligning the
subsequent version list decode.
Use xdr_align_size() for each string length to match what
xdr_encode_opaque() actually writes. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: noise: reject response consumption after intermediate initiation
Two threads begin processing the identical response message, received
twice. The first thread, A, runs. While it's running, the second one,
B, gets partway through, and during that slow calculation, or even while
blocking on down_write(), A completes and then also a handshake
initiation that's already been queued up runs in thread C, which itself
takes that same down_write(). The handshake initiation creation
succeeds, and sets the state back to waiting-for-response, and calls
up_write(), at which point thread B resumes, because either its finished
its calculations or was finally allowed to acquire down_write(). Thread
B then copies the state back to the peer, and begins a new session,
using that state, which is the same session as the one made in thread A.
Thread A Thread B Thread C
down_read()
sA = handshake->state
memcpy(cA, handshake->crypto)
up_read()
if (sA != 1)
goto fail
slow_crypto(cA)
down_read()
sB = handshake->state
memcpy(cB, handshake->crypto)
up_read()
if (sB != 1)
goto fail
slow_crypto(cB)
down_write()
if (sA != handshake->state)
goto fail
memcpy(handshake->crypto, cA)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
down_write()
slow_crypto(handshake->crypto)
handshake->state = 1
up_write()
down_write()
if (sB != handshake->state)
goto fail
memcpy(handshake->crypto, cB)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
This seems basically impossible to hit in a meaningful way in practice,
but ensure that it absolutely cannot happen by comparing the ephemeral
private key that's on the stack with the latest one that the peer's
handshake state has. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: RCU-delay the freeing of struct fsverity_info
__fsverity_get_info() calls rhashtable_lookup_fast(), which just uses
rcu_read_lock() and doesn't directly synchronize with
fsverity_remove_info().
For the same inode this isn't a problem: its fsverity_info is removed
only at inode eviction time or upon failure to enable verity, when the
inode no longer needs its fsverity_info and it will no longer be
accessed via that inode.
However, this is broken and can cause a use-after-free for concurrent
__fsverity_get_info() for *different* inodes. Those rely on following
fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only.
They also use fsverity_info::inode to do the key comparison.
Fix this by RCU-delaying the freeing of 'struct fsverity_info' after
it's been removed from the rhashtable. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak on error descriptor
When the error bit is set in the RX completion descriptor, the buf_state
and its attached buffer should be freed. In the case of AF_XDP ZC, the
XSK buffer was not freed, leading to a leak.
This issue was caught by LLM. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: protect clcsock lifetime in smc_getname
smc_getname() dereferences smc->clcsock without holding
clcsock_release_lock. Link-group termination can release the CLC socket
through smc_close_active_abort() while the SMC socket is still open,
for example after shutdown(SHUT_WR).
A getsockname() caller can load smc->clcsock, then the termination worker
can clear the pointer and call sock_release() before the caller accesses
clcsock->ops or invokes getname(). This causes a use-after-free; if the
worker clears the pointer before the load, it causes a NULL dereference.
The syscall's file reference keeps the SMC socket alive but does not
prevent asynchronous release of its CLC socket.
KASAN reported the following with test-only timing instrumentation:
BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0
Read of size 8 at addr ffff888109abb4e0 by task poc/103
Call Trace:
smc_getname+0x19e/0x1b0
do_getsockname+0xe5/0x170
__sys_getsockname+0x8c/0x100
Allocated by task 95:
sock_alloc_inode+0x1e/0x280
sock_alloc+0x3d/0x240
__sock_create+0x7e/0x430
smc_create+0x121/0x240
Freed by task 0:
kmem_cache_free+0xcc/0x340
rcu_core+0x50a/0x1850
Last potentially related work creation:
evict+0x446/0x6c0
smc_clcsock_release+0xa8/0xd0
smc_close_active_abort+0x26a/0x3a0
__smc_lgr_terminate.part.0+0x137/0x2e0
Hold clcsock_release_lock across the pointer check and the getname()
callback to serialize with smc_clcsock_release(). Return -EBADF if the
CLC socket has already been released, preserving the existing peer
state check and the callback's return value otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits()
When skb_copy_and_csum_bits() reaches unreadable frags it returns 0
after copying only the linear part, and the rest of the caller's buffer
is left as it was. The callers copy into a buffer that is about to go
out on the wire: an ICMP error quoting the offending packet, or a
driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer
is zeroed beforehand, so whatever was in memory there gets sent.
Zero the part of the buffer we didn't fill. The checksum usually
won't match the data any more, so the receiver will usually drop the
packet, but either way it no longer carries anything it shouldn't.
Only zero for a positive @len, a negative one from a broken caller must
not turn into a huge memset(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE
errata_probe_ghostwrite() only marks the CPU as vulnerable when it is
called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation
in ghostwrite_enable_mitigation() only takes effect if the vulnerable
state was recorded before the boot alternatives are patched.
The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY
is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a
kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the
early alternatives never run, so ghostwrite_state is never set to
VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector
remains enabled, and sysfs reports "Not affected" on a vulnerable
T-Head C9xx CPU.
Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the
vulnerability is detected in the early boot stage and the default
mitigation is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the
address used for the PA_LINK lookup from hci_sent_cmd_data(). The
returned pointer borrows storage from sent_cmd or req_skb, without
holding a reference to either skb.
The scan worker runs on req_workqueue while hci_cmd_work() runs on the
separate device workqueue. After the scan worker loads sent_cmd, the
command worker can free and replace it before hci_sent_cmd_data()
dereferences the skb. The command payload can also be freed between
returning from the helper and comparing the address. The connection
lookup's RCU critical section does not protect the command skb.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_sent_cmd_data+0x27c/0x2f0
hci_le_set_scan_param_sync+0x43a/0x850
hci_passive_scan_sync+0xb09/0x1460
hci_update_passive_scan_sync+0x47c/0x6e0
hci_le_pa_create_sync+0x200/0xa70
hci_cmd_sync_work+0x13c/0x290
Allocated by task 95:
skb_clone+0x13f/0x340
hci_cmd_work+0x2a9/0x7e0
Freed by task 95:
kmem_cache_free+0xba/0x3a0
hci_cmd_work+0x29c/0x7e0
Use hdev->lock to serialize the address snapshot with sent_cmd
replacement. Protect req_skb replacement and completion cleanup with
the same lock because the helper falls back to that skb. Copy the
address before releasing the lock and use the copy for the existing
RCU-protected connection lookup. Release the mutex before sending or
waiting for commands, preserving the lookup and completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: never expire a locked mount
Locked mounts are special. They protect the underlying files and
directories from being revealed. do_umount() refuses to unmount locked
mounts but shrink_submounts() doesn't.
A shrinkable mount can become locked once the owner of a user namespace
puts it beneath a locked mount with MOVE_MOUNT_BENEATH. The locked
property now moves to the mount at the bottom making it possible to
unmount the top mount.
So umount() of an unlocked ancestor now expires the bottom mount first
and the covered directory is revealed:
move_mount(c -> x/hidden, MOVE_MOUNT_BENEATH) = 0
the cover after the lock moved: umount2(x/hidden) = 0
the holder of the lock: umount2(x/hidden) = EINVAL
the root of the copy, busy: umount2(x) = EBUSY
reads x/hidden/secret: "covered-by-root"
So leave a locked mount alone as it dies together with its parent. A
plain umount() of an unlocked mount with a locked one below it is EBUSY
from now on. It's the same for any other locked child. A lazy umount
still takes the whole tree.
mark_mounts_for_expiry() never sees a locked mount. lock_mnt_tree()
leaves a mount on an expiry list alone and nothing else puts a locked
one on such a list. Add an assert for this. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: send the relay's General Query directly from the receive path
An skb queued in a qdisc can outlive the tunnel it references
through a raw pointer in skb->cb. For example, with igmp_qrv set
to 1 on the relay a tunnel lives for 135s, so a netem delay of
180s on the amt device outlives it; when the tunnel expires and is
freed, the subsequent dequeue triggers a use-after-free in
amt_dev_xmit().
BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20
Call Trace:
amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262]
dev_hard_start_xmit+0x22f/0x620
sch_direct_xmit+0x12e/0xac0
netem_dequeue+0x333/0xc50
net_tx_action+0x35c/0xa60
amt_send_igmp_gq() and amt_send_mld_gq() are only called from
amt_request_handler(), inside the rcu_read_lock_bh() section of
amt_rcv(). amt_request_handler() already has the tunnel the query is
for: it found or created it inside that section. Queuing the query with
dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the
Ethernet header and calls amt_send_membership_query() for that tunnel.
Make that call directly from the two senders instead, the same way
amt_send_advertisement() transmits from the receive path. The query
never waits in a qdisc, the tunnel is only dereferenced inside the
RCU section that found or created it, and nothing is stored in
skb->cb, so no lookup or refcount is needed. Remove the query branch
of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no
users left.
Behaviour changes:
- The relay's own General Queries no longer pass through the amt
device's egress path: its qdisc, tc egress (clsact/tcx), the
netfilter egress hook and packet taps. They are still visible as
UDP on the underlay.
- A query that is sent successfully is no longer counted as
tx_dropped. The old query branch left through the unlock label,
which counted every sent query as dropped.
- A query that reaches amt_dev_xmit() on a relay from elsewhere,
such as a userspace querier, is now dropped at the IGMP/MLD type
switch. Before, it trusted whatever skb->cb held, and a NULL
tunnel hit the WARN_ON(1). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: mark the rcu locked areas properly
When we bump the uref counter, there's no need to keep
the rcu lock because the referred hash table can't
disappear. Also, from the same reason in mtype_gc we
need the rcu lock and not a spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix skb UAF and leaks on llc_mac_hdr_init() failure
In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init()
fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks
the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu),
and double-frees skb when llc_conn_state_process() drops its reference.
In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is
leaked if llc_mac_hdr_init() returns an error.
Free nskb in all three error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: prevent collapsing skbs across boundary in rtx queue
tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on
tcp_write_queue_tail(sk) to prevent skbs queued after a switch to
device encryption from being collapsed into earlier skbs.
The fence is a no-op if all earlier data has already been transmitted
when the switch happens: sk->sk_write_queue is empty. The not yet
acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0.
On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or
tcp_shift_skb_data() can then merge an skb queued after the switch into
one queued before it.
Both users of the fence are affected:
- psp: devices only encrypt skbs with skb->decrypted set. The merged skb
keeps decrypted = 0 from the earlier skb, so merged data sent after
psp_sock_assoc_set_tx() is retransmitted in cleartext.
- tls device offload: the merged skb straddles the start marker set in
tls_set_device_offload(). The software fallback (fill_sg_in() returns
-EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an
skb and drop it. Every retransmit rebuilds the same skb, so the
connection stalls.
Fix this in two places, for defense in depth:
1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence()
when tcp_write_queue_tail(sk) is NULL.
2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as
tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both
collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this
condition. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: discard the rest of the packet on a stale-cookie error
When an association is in COOKIE-ECHOED state and the peer sends a
bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary
addresses, processing the ERROR chunk takes the non-fatal stale-cookie
retry path sctp_sf_do_5_2_6_stale(), which queues
SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive.
sctp_cmd_del_non_primary() removes every non-primary transport -
including the very transport this packet arrived on, which is still
referenced by the receive lookup and shared by all chunks of the
packet via chunk->transport.
sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from
the removed transport, but right afterwards the bundled DATA chunk
makes sctp_assoc_bh_rcv() re-register
asoc->peer.last_data_from = chunk->transport unconditionally, undoing
the redirection with the just-removed transport.
Once the packet is done, the receive reference is dropped and the
transport is RCU-freed, while the surviving association keeps the
dangling last_data_from. A later FWD-TSN (or the delayed SACK timer)
makes sctp_gen_sack() dereference it (->param_flags and friends), and
sctp_make_sack()/sctp_outq_select_transport() may write to the freed
object and link it into the live transport list. This is a
use-after-free triggerable by any malicious SCTP peer (or a local
unprivileged user acting as one) with no capabilities required:
BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660
Read of size 4 at addr ffff88800e1e356c by task poc/115
Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <-
sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv
Allocated: sctp_transport_new <- sctp_assoc_add_peer <-
sctp_process_init (INIT-ACK processing)
Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core
(call_rcu queued by sctp_transport_put at end of sctp_rcv)
The buggy address is located 364 bytes inside of freed 1024-byte
region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k
Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport
was removed") only covers the window between the receive lookup and
the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog);
here the transport is removed *while* the packet is being processed,
by an earlier chunk of the same packet, so the drop in sctp_inq_push()
does not reach this path. Verified with the bundled [ERROR(Stale
Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still
fires with that commit applied, and is gone with this patch on top.
Fix it by discarding the rest of the packet on this path, as suggested
by Xin. After the stale-cookie ERROR has sent the association back to
COOKIE-WAIT and removed the non-primary transports, the remaining
chunks of the packet can only run against the restarted handshake
while referencing the removed arrival transport through
chunk->transport: besides the last_data_from registration above,
sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also
copy that pointer into association-lifetime state that
sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit
them, in line with what sctp_inq_push() does for chunks whose
transport was removed before processing. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not let ipv6_find_hdr() return an offset past the packet end
ipv6_find_hdr() walks the extension header chain, skipping each header by
the length that header itself declares. ipv6_optlen() returns up to 2048,
and the skip is never checked against skb->len, so the offset stored in
*offset can point past the end of the packet.
openvswitch installs that offset as the transport header, and
update_ipv6_checksum() then reads and writes the transport checksum field
out of bounds:
BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470
Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629
CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348
Call Trace:
inet_proto_csum_replace16+0x445/0x470
set_ipv6_addr+0x3dd/0x460
do_execute_actions+0x6a3d/0x7c40
ovs_execute_actions+0xfd/0x480
ovs_packet_cmd_execute+0xc38/0xf20
genl_rcv_msg+0x59e/0x870
netlink_rcv_skb+0x18b/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x6bc/0xa20
The buggy address belongs to the object at ffff88810b754980
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 390 bytes inside of
freed 704-byte region [ffff88810b754980, ffff88810b754c40)
Other callers use that offset too, so bound it here rather than in one
caller.
Reject a header whose declared length does not fit in the packet.
ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this
adds no new failure mode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix use-after-free and multi-container gap in kfd_dev_mapping
kfd_dev_mapping caches the address_space of the first /dev/kfd opener
so that the GPU reset path can call unmap_mapping_range() to zap all
userspace mappings of doorbell and MMIO ranges. This design has two
bugs that both manifest under SRIOV with multiple containers:
1. Use-after-free / rwsem deadlock. The cached pointer refers to an
inode owned by the first opener's container. When that container
exits and its inode is released, kfd_dev_mapping becomes a dangling
pointer. A subsequent GPU reset dereferences it inside
unmap_mapping_range(), which takes i_mmap_rwsem on the freed inode,
causing a hard hang observable as an uninterruptible rwsem wait.
2. Multi-container gap. Only the first opener's address_space is cached;
VMAs created by later openers live in a different address_space and
are never reached by unmap_mapping_range(). After a GPU reset those
stale mappings keep doorbell and MMIO pages accessible to guest
userspace with no GPU behind them, risking PCIe transaction timeouts
and NMI panics.
Fix both bugs with the same approach used by DRM core (drm_drv.c):
create a private pseudo-filesystem at module init time and allocate one
anonymous inode from it. In kfd_open() redirect every opener's
file->f_mapping to that inode's address_space. The inode is
module-owned, lives exactly as long as the amdgpu module, and collects
VMAs from all openers in one address_space. A single
unmap_mapping_range() call in the reset path then correctly reaches
every container's mappings with no dangling pointer risk.
The hang manifests as an NMI backtrace on the GPU reset workqueue stuck
spinning in rwsem_down_read_slowpath() with a corrupted i_mmap_rwsem:
Workqueue: amdgpu-reset-dev xgpu_ai_mailbox_flr_work [amdgpu]
Call Trace:
<TASK>
kvm_wait+0x1f/0x40
__pv_queued_spin_lock_slowpath+0x31d/0x3a0
_raw_spin_lock_irq+0x51/0x80
rwsem_down_read_slowpath+0xb3/0x550
down_read+0x48/0xd0
unmap_mapping_range+0x71/0x140
kfd_dev_unmap_mapping_range+0x5b/0x140 [amdgpu]
amdgpu_amdkfd_clear_kfd_mapping+0xd8/0x190 [amdgpu]
amdgpu_device_gpu_recover+0x232/0x450 [amdgpu]
xgpu_ai_mailbox_flr_work+0xb5/0xc0 [amdgpu]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
(cherry picked from commit 1128b4a52de1572e87431de837fd9850cb99542c) |
