| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: Avoid overflowing userspace buffer on stats query
The ethtool -S command operates across three ioctl calls:
ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and
ETHTOOL_GSTATS for the values.
If the number of stats changes between these calls (e.g., due to device
reconfiguration), userspace's buffer allocation will be incorrect,
potentially leading to buffer overflow.
Drivers are generally expected to maintain stable stat counts, but some
drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making
this scenario possible.
Some drivers try to handle this internally:
- bnad_get_ethtool_stats() returns early in case stats.n_stats is not
equal to the driver's stats count.
- micrel/ksz884x also makes sure not to write anything beyond
stats.n_stats and overflow the buffer.
However, both use stats.n_stats which is already assigned with the value
returned from get_sset_count(), hence won't solve the issue described
here.
Change ethtool_get_strings(), ethtool_get_stats(),
ethtool_get_phy_stats() to not return anything in case of a mismatch
between userspace's size and get_sset_size(), to prevent buffer
overflow.
The returned n_stats value will be equal to zero, to reflect that
nothing has been returned.
This could result in one of two cases when using upstream ethtool,
depending on when the size change is detected:
1. When detected in ethtool_get_strings():
# ethtool -S eth2
no stats available
2. When detected in get stats, all stats will be reported as zero.
Both cases are presumably transient, and a subsequent ethtool call
should succeed.
Other than the overflow avoidance, these two cases are very evident (no
output/cleared stats), which is arguably better than presenting
incorrect/shifted stats.
I also considered returning an error instead of a "silent" response, but
that seems more destructive towards userspace apps.
Notes:
- This patch does not claim to fix the inherent race, it only makes sure
that we do not overflow the userspace buffer, and makes for a more
predictable behavior.
- RTNL lock is held during each ioctl, the race window exists between
the separate ioctl calls when the lock is released.
- Userspace ethtool always fills stats.n_stats, but it is likely that
these stats ioctls are implemented in other userspace applications
which might not fill it. The added code checks that it's not zero,
to prevent any regressions. |
| Insufficient Granularity of Access Control vulnerability in Apache Camel Platform HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The component decided whether an endpoint ran in proxy mode by testing whether its configured path started with the string proxy, rather than by matching the path exactly. Any endpoint whose path merely begins with those characters - proxyStatus, proxy-config, proxying and so on - therefore became a proxy endpoint without the route author asking for it. A proxy endpoint forwards requests onward, so an endpoint that was intended to serve its own content instead relays traffic on behalf of whoever calls it, which is both a request forgery primitive and an exposure of whatever the forwarding path can reach.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Proxy mode is now selected by an exact path match rather than by prefix. For deployments that cannot upgrade immediately, rename any endpoint path that begins with proxy but is not intended to be a proxy. |
| IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to a heap buffer overflow when processing MQPUT or MQPUT1 operations with malformed message handle properties. |
| snac2 before 2.93 contains a heap-based buffer overflow vulnerability in _xs_json_load_lexer() that allows unauthenticated remote attackers to corrupt heap memory by sending JSON strings containing a \u0000 escape. Attackers can send a single crafted application/activity+json POST to activitypub_post_handler(), which parses it before signature checks, overflowing heap allocations and crashing the server. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Heap-based buffer overflow in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Remote Access Point-to-Point Protocol (PPP) EAP-TLS allows an unauthorized attacker to execute code over a network. |
| bincookie is a header-only binarycookies parser. Prior to 0.1.9, bincookie_init_file() in bincookie.h allocates a buffer using the actual .binarycookies file length but trusts the file-controlled num_pages field as the loop bound for byte-swapping page_sizes entries. A crafted file can make the loop read and write beyond the heap allocation, and related unvalidated page sizes and cookie_offsets can drive additional out-of-bounds accesses in page and cookie iteration. Applications that parse an attacker-supplied binarycookies file may crash or suffer heap corruption that can potentially enable code execution. This issue is fixed in version 0.1.9. |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: keep room for the mac header in dst_dev_overhead()
The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as
the length they are about to push plus dst_dev_overhead(), then push the
new headers and rebuild the mac header below them with
skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom,
but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device,
16 bytes for plain Ethernet.
Where the mac header is longer than that, as it is on ingress through a
VLAN device with reorder_hdr off, the rebuild runs out of room:
skb_set_mac_header(skb, -skb->mac_len) computes a negative offset,
stores it unchecked in the u16 skb->mac_header, and the memmove that
follows writes skb->mac_len bytes about 64 KB past skb->head.
Forwarding plain ping6 traffic through such a device reproduces it on
all five seg6 encapsulation modes and on the rpl and ioam6 inline paths;
skb->mac_header comes back as 65534 on a 704-byte head.
Return the larger of the two. The helper already returns skb->mac_len
when it has no dst, so this only makes the other branch agree, and it
covers every caller rather than each call site in turn. |
| Time-of-check time-of-use (toctou) race condition in Reliable Multicast Transport Driver (RMCAST) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix slab-out-of-bounds when handling team device events
The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event()
functions check for LAG masters (which includes both bonding and team
devices) but only call bonding-specific APIs. When processing team device
events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on
team_port structures causes KASAN to detect an out-of-bounds memory access
since team_port is smaller than bond slave.
Fix this by wrapping the bond-specific API calls with a check for bonding
devices. This allows the function to still process LAG events for both
bonding and teams but only calls bond-specific functions when dealing with
actual bonding devices.
For mlx5_handle_changeinfodata_event(), keep the explicit bond check as
mlx5 doesn't handle state information for team ports anyway.
Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6:
- Bonding: PASS (no regressions)
- Team device: PASS (no KASAN errors) |
| Heap-based buffer overflow in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Hyper-V allows an authorized attacker to disclose information over a network. |
| Heap-based buffer overflow in Windows Error Reporting allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in DNS Server allows an authorized attacker to disclose information over a network. |
| Heap-based buffer overflow in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and the root directive or access log format references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Heap-based buffer overflow in Windows NTFS allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
