| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST
In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and
.len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the
maximum payload length and permits shorter payloads (e.g., 0 bytes).
When seg6_genl_set_tunsrc() copies sizeof(struct in6_addr) bytes via
kmemdup(val, sizeof(*val), GFP_KERNEL), a short SEG6_ATTR_DST attribute
triggers a 16-byte out-of-bounds read past skb->tail into uninitialized
skb->head memory, which is stored in sdata->tun_src and leaked back to
userspace via SEG6_CMD_GET_TUNSRC.
Switch SEG6_ATTR_DST in seg6_genl_policy to
NLA_POLICY_EXACT_LEN(sizeof(struct in6_addr)) so that generic netlink
validation rejects any attribute whose length is not exactly
sizeof(struct in6_addr) with -ERANGE.
Tested in QEMU against Linux 7.3.0-rc3 by sending a SEG6_CMD_SET_TUNSRC
Generic Netlink message with a 0-byte SEG6_ATTR_DST attribute followed
by SEG6_CMD_GET_TUNSRC. On the unfixed kernel, SEG6_CMD_SET_TUNSRC
succeeds (err = 0) and SEG6_CMD_GET_TUNSRC leaks 16 bytes of
uninitialized kernel heap memory (tun_src =
836a61ecc4d25a1042a8d60411cfb378); with this patch applied,
SEG6_CMD_SET_TUNSRC is rejected by netlink policy validation with
-ERANGE (-34) and tun_src remains zeroed. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| Heap-based buffer overflow in HID class driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely. |
| Heap-based buffer overflow in Windows Text Shaping allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: restore combined single-frag length gate
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6. |
| Buffer Copy without Checking Size of Input in certain ASUS router models allows an adjacent authenticated user to corrupt device operations and cause a denial of service via an HTTP request with input exceeding the expected length.
Refer to the ' Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: reject data replies with an out-of-range payload size
recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an
outstanding read request. The peer-supplied payload length reaches it as
the signed int data_size, and two peer-controlled inputs can make it
negative. With a negotiated data-integrity-alg the digest length is
subtracted first, so a reply whose payload is smaller than the digest
underflows data_size. With no integrity algorithm (the default) data_size
is assigned from the unsigned h95/h100 wire length and drbdd() never
bounds it for a payload-carrying command, so a length above INT_MAX casts
it negative; this path needs no non-default feature. The bio receive loop
then computes expect = min_t(int, data_size, bv_len), which is negative,
and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX
into the first mapped page.
The sibling receive path read_in_block() is not affected: it uses an
unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving.
Reject a data reply whose size is negative after the optional digest
subtraction, covering both triggers.
Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen
bytes past a bio page in the receiver, corrupting kernel memory. A node
that reads from its peer (a diskless node, or read-balancing to the peer)
is exposed in the default configuration; data-integrity-alg is not
required. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nfcmrvl: validate helper command length before pull
The firmware download receive path removes the NCI data header and
reads the helper command before validating the remaining packet length.
A short frame can therefore reach the data access before the malformed
packet is rejected.
Validate the complete helper command length before stripping the NCI
data header. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xps: reject an out of range traffic class
Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and
dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc()
lowers dev->num_tc without touching either array.
netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and
netdev_get_prio_tc_map() returns the entry as it stands, so a leftover
entry is handed out as a traffic class >= dev->num_tc. Taking that
class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a
negative one and indexes an XPS map sized for dev->num_tc classes:
tci = j * num_tc + tc;
RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map);
attr_map[] holds nr_ids * num_tc entries and j runs over the ids named
in the mask, so a class that is not below num_tc pushes tci past the end
of the map for the last ids and the store overruns it.
Any caller that lowers num_tc leaves such entries behind, and
mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than
netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7]
still describe txq 1..7. The splat is from an XPS write to txq 2 on a
veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and
j == 6 stores one past the end of the 88-byte map:
BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954)
Write of size 8 at addr ffff88813016bc58 by task xps_oob/634
__netif_set_xps_queue (net/core/dev.c:2954)
xps_rxqs_store (net/core/net-sysfs.c:1880)
netdev_queue_attr_store (net/core/net-sysfs.c:1390)
Allocated by task 634:
__kmalloc_noprof (mm/slub.c:5439)
__netif_set_xps_queue (net/core/dev.c:2937)
The buggy address is located 0 bytes to the right of
allocated 88-byte region [ffff88813016bc00, ffff88813016bc58)
Reject a class the map has no room for. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
