Export limit exceeded: 414190 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98546 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/boot: Disable trapping of PMZR_EL0 writes to EL2 __init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2. PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a write from EL0 reaches the trap and takes the host down without a panic message. Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9 bits. | ||||
| CVE-2026-98547 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: fix integer overflow in prb_calc_retire_blk_tmo() prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic: mbits = (blk_size_in_bytes * 8) / (1024 * 1024); If I'm reading the validation right, tp_block_size is user controlled and packet_set_ring() only rejects values that are <= 0 as int or not page aligned, so a 256MiB block goes right through (and alloc_one_pg_vec_page() even has a vzalloc fallback for it). 0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps (div == 1) the function ends up returning -2047. The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1, so the trigger set is [256,512), [768,1024), [1280,1536) and [1792,2048) MiB. Other sizes wrap to non-negative values and faster links divide the unsigned value back below 2^31, which is why this doesn't blow up for everyone. What makes it fatal is what happens next in init_prb_bdqc(): p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...)); hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime, HRTIMER_MODE_REL_SOFT); A negative relative timeout expires immediately. The callback unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns the negative interval into hrtimer_resolution: if (interval < hrtimer_resolution) interval = hrtimer_resolution; So the SOFT timer re-fires at the maximum rate forever, holding sk_receive_queue.lock each pass. One CPU spins in softirq until the socket is closed. Repeat with more rings and the machine is gone. The overflow itself is ancient - it was introduced together with TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation."). Its effect prior to f7460d2989fa ("net: af_packet: Use hrtimer to do the retire operation", v6.18) was not as clear-cut, though: the return value was stored into an unsigned short retire_blk_tov, so a negative result was truncated, and a 0-jiffy delay loop could be programmed as well. Neither is nearly as detrimental as the immediate maximum-rate spin the hrtimer conversion turned it into. (Unrelated to CVE-2019-20812 - that one was the ethtool failure path returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.) Reproducer, needs CAP_NET_RAW (a --network host container has it by default) and a 1 Gbps NIC (QEMU e1000 works): int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); bind(fd, ...); int v = TPACKET_V3; setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v)); struct tpacket_req3 req = { .tp_block_size = 0x10000000, .tp_block_nr = 1, .tp_frame_size = 2048, .tp_frame_nr = 0x10000000 / 2048, .tp_retire_blk_tov = 0, }; setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req)); Compute in 64 bits instead. The operands are already bounded by the existing validation, so nothing else changes. If you'd prefer a different fix, just say so and I'll respin. | ||||
| CVE-2026-98566 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: clamp freelist reconstruction requests The firmware reconstruction count controls accesses to the request's fixed freelist ID array and the copy into the fixed response array. Neither access currently bounds the count to those protocol arrays. Clamp the count to the request capacity, which is shared by the response layout, and use that count consistently for reconstruction and response publication. Keep the firmware recovery exchange instead of dropping an oversized request without a response, as discussed with the firmware maintainer. The issue was found by our static-analysis tool. | ||||
| CVE-2026-98592 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: clear TX descriptor on fragment mapping failure emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for every slot beyond old_head as soon as that slot's memset()'d local copy is committed with "*tx_desc_addr = tx_desc", i.e. before the buffers for that slot have necessarily all been mapped successfully. If emac_tx_map_frag() then fails on a later fragment, the err_free_skb path calls emac_free_tx_buf() to unmap and drop the skb, but leaves the already-written descriptor memory untouched, and tx_ring->head is never advanced past old_head (the "tx_ring->head = head" store is skipped by the goto). So a slot between old_head and the rolled-back head can be left with TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that emac_free_tx_buf() just tore down, while software considers that slot free again. The next successful emac_tx_mem_map() call only rebuilds old_head itself; if the DMA engine auto-advances into the following descriptor once it finishes old_head's packet, it will fetch that stale, already-unmapped address. emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing the descriptor as a pair when reclaiming completed descriptors; do the same in the mapping failure path. | ||||
| CVE-2026-98702 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read. | ||||
| CVE-2026-98801 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: restrict SO_RESERVE_MEM to TCP sockets and cap max value Commit 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") and commit d00c8ee31729 ("net: fix possible NULL deref in sock_reserve_memory") only checked sk_has_account(sk), which is true for both TCP and UDP sockets. However, SO_RESERVE_MEM and sk_unused_reserved_mem() are currently only supported by TCP: - On UDP sockets, sk->sk_forward_alloc is protected by sk->sk_receive_queue.lock, whereas sock_reserve_memory() and sock_release_reserved_memory() only acquire lock_sock(sk). Concurrent UDP packet reception/release and setsockopt(SO_RESERVE_MEM) corrupt sk_forward_alloc and memcg accounting. - udp_rmem_release() reclaims excess sk_forward_alloc without accounting for sk_unused_reserved_mem(sk). Restrict sock_reserve_memory() to TCP sockets (sk_is_tcp(sk)) for now. Supporting SO_RESERVE_MEM for UDP (acquiring sk_receive_queue.lock and honoring sk_unused_reserved_mem() in udp_rmem_release()) can be done in a future net-next series if needed. In addition, reject val > SZ_1G with -EINVAL in sk_setsockopt(SO_RESERVE_MEM). Without an upper bound, values near INT_MAX cause sk_mem_pages(delta) and (pages << PAGE_SHIFT) to overflow 32-bit signed int, corrupting sk->sk_forward_alloc and sk->sk_reserved_mem. Using a page-aligned cap (SZ_1G) ensures that the page-rounded sk->sk_reserved_mem reported by getsockopt(SO_RESERVE_MEM) can always be passed back to setsockopt(SO_RESERVE_MEM). | ||||
| CVE-2026-98569 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ip_gre: Reject enabling collect metadata through changelink ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP or ERSPAN device. Unlike newlink, changelink does not enforce metadata tunnel uniqueness. Converting a non-metadata device can therefore replace the metadata receive entry for another device of the same type in the same netns. Deleting either device then clears the shared entry, breaking metadata receive lookup for the surviving device. If parameter validation fails after collect_md is set, deleting the modified device can also clear an entry it never owned. Reject enabling metadata mode in both changelink callbacks before any encapsulation or tunnel parameters are modified. Allow requests that repeat the metadata attribute on an existing metadata device. | ||||
| CVE-2026-98573 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative. | ||||
| CVE-2026-98576 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix slab-out-of-bounds reads when logging service names nfc_llcp_wks_sap() and nfc_llcp_build_sdreq_tlv() pass non-null- terminated strings to pr_debug() using the %s format specifier. The buffers are allocated via kmemdup() or come from netlink attributes and are not guaranteed to be null-terminated, causing __dynamic_pr_debug() to read beyond the allocated region: KASAN: slab-out-of-bounds Read in __dynamic_pr_debug Fix both call sites by using %.*s with the explicit length to limit the output to the actual length of the string. | ||||
| CVE-2026-98591 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bounds check for skb-backed dynptrs The skb_pointer_if_linear() function checks whether a memory region of length len starting at offset off into the skb is in the linear area, and returns a pointer to the region if so. The check currently subtracts between skb_headlen and offset of the check, and since skb_headlen is unsigned the subtraction can underflow. This causes the bounds check to spuriously pass and generate an arbitrary pointer of the form *(skb->data + off). The only user of this helper is currently skb-backed BPF dynptr code. Returning the wrong pointer leads to the dynptr erroneously being backed with invalid memory. Ensure the subtraction cannot underflow, and fail the check if it would. Use u64 arithmetic to also prevent overflow when calculating (skb_headlen(skb) - off) since off is unsigned. | ||||
| CVE-2026-98600 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame() While rfcomm_recv_frame() verifies that skb->len is at least sizeof(*hdr) + 1 (4 bytes: 3-byte header + 1-byte FCS), an RFCOMM frame with an extended 2-byte length field (!__test_ea(hdr->len)) has a 4-byte header plus a 1-byte FCS (5 bytes minimum, sizeof(*hdr) + 2). When a 4-byte RFCOMM frame with EA == 0 arrives: 1. The initial skb->len < sizeof(*hdr) + 1 check passes (4 < 4 is false). 2. Trimming the FCS byte decrements skb->len to 3. 3. If __check_fcs() succeeds, skb_pull(skb, 4) fails (4 > 3) and returns NULL without advancing skb->data. 4. Because the return value of skb_pull() is ignored, the un-pulled 3-byte struct rfcomm_hdr remains at skb->data and is either queued as application payload via rfcomm_recv_data() or parsed as a multiplexer control command via rfcomm_recv_mcc() on DLCI 0. Fix this by extending the length check in rfcomm_recv_frame() to also require skb->len >= sizeof(*hdr) + 2 when !__test_ea(hdr->len). | ||||
| CVE-2026-98603 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: replace bind when clearing stale local source The UDP output fallback clears bind->local in place when the remembered source address is no longer usable. The bind is RCU-published and read locklessly by concurrent TX, so an IPv6 reader can observe a torn address. Retry the route lookup with source address autoselection without modifying the bind. After a successful lookup, revalidate the bind and route key under peer->lock, reset the dst cache, and best-effort publish a replacement bind with a wildcard local address. Do not cache the resolved dst when clearing the local source. Replacing the source invalidates all per-CPU cache entries, while dst_cache_set_ip4 and dst_cache_set_ip6 update only the current CPU slot. The current packet can still use the resolved route; if bind allocation fails, a later cache miss retries the repair. | ||||
| CVE-2026-35562 | 4 Amazon, Apple, Linux and 1 more | 5 Amazon Athena Odbc Driver, Athena Odbc, Macos and 2 more | 2026-10-20 | 7.5 High |
| Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations. To remediate this issue, users should upgrade to version 2.1.0.0. | ||||
| CVE-2026-35560 | 4 Amazon, Apple, Linux and 1 more | 5 Amazon Athena Odbc Driver, Athena Odbc, Macos and 2 more | 2026-10-20 | 7.4 High |
| Improper certificate validation in the identity provider connection components in Amazon Athena ODBC driver before 2.1.0.0 might allow a man-in-the-middle threat actor to intercept authentication credentials due to insufficient default transport security when connecting to identity providers. This only applies to connections with external identity providers and does not apply to connections with Athena. To remediate this issue, users should upgrade to version 2.1.0.0. | ||||
| CVE-2026-35559 | 4 Amazon, Apple, Linux and 1 more | 5 Amazon Athena Odbc Driver, Athena Odbc, Macos and 2 more | 2026-10-20 | 6.5 Medium |
| Out-of-bounds write in the query processing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to crash the driver by using specially crafted data that is processed by the driver during query operations. To remediate this issue, users should upgrade to version 2.1.0.0. | ||||
| CVE-2026-35558 | 4 Amazon, Apple, Linux and 1 more | 5 Amazon Athena Odbc Driver, Athena Odbc, Macos and 2 more | 2026-10-20 | 7.8 High |
| Improper neutralization of special elements in the authentication components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to execute arbitrary code or redirect authentication flows by using specially crafted connection parameters that are processed by the driver during user-initiated authentication. To remediate this issue, users should upgrade to version 2.1.0.0. | ||||
| CVE-2026-5485 | 2 Amazon, Linux | 3 Amazon Athena Odbc Driver, Athena Odbc, Linux Kernel | 2026-10-20 | 7.8 High |
| OS command injection in the browser-based authentication component in Amazon Athena ODBC driver before 2.0.5.1 on Linux might allow a threat actor to execute arbitrary code by using specially crafted connection parameters that are loaded by the driver during a local user-initiated connection. To remediate this issue, users should upgrade to version 2.0.5.1 or later. | ||||
| CVE-2026-35561 | 4 Amazon, Apple, Linux and 1 more | 5 Amazon Athena Odbc Driver, Athena Odbc, Macos and 2 more | 2026-10-20 | 7.4 High |
| Insufficient authentication security controls in the browser-based authentication components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to intercept or hijack authentication sessions due to insufficient protections in the browser-based authentication flows. To remediate this issue, users should upgrade to version 2.1.0.0. | ||||
| CVE-2026-98158 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ppp_async: drop the errored frame instead of resetting its headroom ppp_receive_nonmp_frame() prepends a two-byte direction tag before running the pass/active BPF filters: *(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG); Nothing on the receive path guarantees those two bytes of headroom. The frame-error path in ppp_async's process_input_packet() resets a reused skb's headroom to zero while claiming to restore it to a freshly allocated state - but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD: err: if (skb) { /* make skb appear as freshly allocated */ skb_trim(skb, 0); skb_reserve(skb, - skb_headroom(skb)); } ap->rpkt still points at that skb, so the next frame is reassembled into it with no headroom at all. A peer that sends a bad-FCS frame followed by one beginning ff 03 then leaves a single byte of headroom by the time the filter tag is pushed, which lands one byte below skb->head: skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000 data:ffff888003c0ffff tail:0x30 end:0x640 dev:<NULL> kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x13e/0x230 Call Trace: skb_push+0xbd/0x100 ppp_receive_nonmp_frame+0x48a/0x1d10 ppp_input+0x4e9/0x2f80 ppp_async_process+0x2a/0xe0 tasklet_action_common+0x20f/0x8a0 handle_softirqs+0x18e/0x590 Kernel panic - not syncing: Fatal exception in interrupt Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb() gives the rest of the receive path. Besides the filter panic above, when CCP compression is enabled ppp_decompress_frame() hands skb->data - 2 to ->decompress()/->incomp(), which then reads out of bounds before skb->head for the same reason. Rather than restore the headroom, drop the errored frame - as ppp_synctty already does on its error path - and clear ap->rpkt so the next frame is reassembled into a fresh skb with proper headroom. This is simpler and fixes both the filter under-panic and the CCP out-of-bounds read. The original V1 of this patch made room in ppp_receive_nonmp_frame() with skb_cow_head(); Eric pointed out that fixing the root cause in the transport is the right approach. Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an interesting (remote) DoS: root configures PPP, the peer supplies two crashing frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a second, and returns cleanly with this applied. | ||||
| CVE-2026-98157 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU. | ||||