| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2. |
| Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, index.js retains every distinct `(queries, context)` result in cache and every parseQueries() AST in parseCache without a size cap, TTL, or eviction, allowing an attacker who can influence repeated browserslist() query values, including valid since `<year>-<month>-<day>` queries, to bypass the caller-controlled BROWSERSLIST_DISABLE_CACHE mitigation and cause linear memory growth followed by an out-of-memory process crash. This issue is fixed in version 4.28.7. |
| An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: sca3000: Fix a resource leak in sca3000_probe()
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: do not forget to endio for partial discard requests
As reported by Qu Wenruo and Avinesh Kumar, the following
getconf PAGESIZE
65536
blkdiscard -p 4k /dev/zram0
takes literally forever to complete. zram doesn't support partial
discards and just returns immediately w/o doing any discard work in such
cases. The problem is that we forget to endio on our way out, so
blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to
end_bio label, which does bio_endio(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp i3c: clean up notifier and buses if driver register fails
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| Gitea SSH Key Parser Denial of Service |
| fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. From 5.9.3 until 5.10.1, src/xmlparser/OrderedObjParser.js processes multiple DOCTYPE declarations within a single XML document and passes each declaration's entities through addInputEntities(). addInputEntities() resets maxTotalExpansions and maxExpandedLength every time it is called, allowing additional DOCTYPE declarations to repeatedly reset the configured entity-expansion limits during one parse operation. A crafted XML document can then cause excessive CPU use, event-loop blocking, memory exhaustion, and process termination. This issue is fixed in version 5.10.1. |
| Denial of Service via Unbounded io.ReadAll in NPM Package Tag Endpoint |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: disallow unicast fragment in fragment
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process. |
| Issue summary: When an OpenSSL QUIC server (Listener SSL object) processes
valid QUIC Initial packets for unknown destination connection IDs, it
can allocate and queue new incoming channels without enforcing any limit.
Impact summary: A remote peer that can make many Initial packets reach the
server listener faster than the application accepts connections, can cause the
memory allocated to store the per-channel state to grow without any limits,
potentially making the QUIC listener unavailable and causing Denial of Service.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The function that handles inbound QUIC packets uses
Connection-Id from the packet header to find an existing connection
(QUIC channel). If no existing connection is found and the packet
type is INITIAL, the function treats the packet as a new connection. It
allocates a new channel object and inserts it into a queue where it
waits to be accepted by the local application with SSL_accept(3ossl).
The memory occupied by these initial channel objects may grow
without bounds if the application is not able to call SSL_accept()
frequently enough to serve these inbound connection requests.
The issue is present since OpenSSL 3.5 when the QUIC server implementation
was added.
The fix introduces a limit for pending connections. The default limit is set
to 256 pending connections (waiting to be accepted by the local application).
Applications may change the default by calling SSL_set_value_uint(3ossl).
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions prior to 1.7.18, the account-data trie syncers are vulnerable to a resource-exhaustion flaw that leaks bounded throttler slots on error paths. In syncDataTrie() (in both userAccountsSyncer.go and kappAccountsSyncer.go), StartProcessing() reserves a slot from the NumGoRoutinesThrottler, but the corresponding EndProcessing() is only called on the success path and on the duplicate-root early return. As a result, any error from trie.NewTrie(), trie.NewTrieSyncer(), or trieSyncer.StartSyncing() (including the network-dependent timeout path) permanently consumes one slot for the lifetime of the throttler. An attacker who can repeatedly cause trie-node sync failures or timeouts during bootstrap can exhaust the bounded throttler, after which further account-data trie syncs stop making progress and SyncAccounts() returns a timeout. Because epoch bootstrap in syncUserAccountsState() and syncKappAccountsState() aborts on any such error, this causes bootstrap to fail, a core availability issue affecting fresh, restarting, or resyncing nodes and validators. This issue is fixed in version 1.7.18. |
| etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.5.33, 3.6.14, and 3.7.1, a network attacker who can reach an etcd TLS listener can open many TCP connections and never send a ClientHello. In client/pkg/transport/listener_tls.go, each connection handled by tlsListener.acceptLoop spawns a goroutine that blocks indefinitely inside tls.Conn.Handshake() and remains tracked in the pending map. Unbounded goroutine and map growth can exhaust memory in the etcd process, causing loss of availability for the cluster and, when etcd backs Kubernetes, the control plane. This issue is fixed in versions 3.5.33, 3.6.14, and 3.7.1. |
| Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Prior to 0.23.18 and 1.0.0-M42, http4s-blaze-server aggregates fragments of an incoming WebSocket message with no limit on total size or fragment count. A client that completes a WebSocket handshake can send an unterminated fragmented message and drive unbounded heap growth in the server JVM, resulting in denial of service through OutOfMemoryError. Any http4s application serving WebSocket routes over BlazeServerBuilder is affected, no non-default configuration is required, and maxWebSocketBufferSize does not bound the aggregate because it bounds only individual frames. A single connection sending continuation frames that never set FIN forces the server to buffer every fragment until the heap is exhausted, terminating the JVM with OutOfMemoryError on the blaze selector thread. Small fragments amplify the cost through per-frame object overhead, so a modest volume of wire bytes is sufficient. This issue is fixed in versions 0.23.18 and 1.0.0-M42. |
| HttpClient based on the classic i/o model fails to correctly release the underlying connection back to the connection manager if it encounters an invalid or unsupported `Content-Encoding` header value in the response message. Please note this defect does not affect HttpClient based on the async i/o model.
This issue affects Apache HttpComponents Client: from 5.0-alpha1 through 5.6.2. |
| Improper neutralization of special elements used in a command ('command injection') in Azure Monitor Agent allows an authorized attacker to elevate privileges over a network. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to improper validation of input size. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.7, the Notepad++ Windows 11 x64 and ARM64 installer passes the attacker-influenced installation directory `$INSTDIR` from PowerEditor/installer/nppSetup.nsi into a PowerShell `-Command` string used by RegisterMSIX to invoke Add-AppxPackage, allowing PowerShell subexpression syntax such as `$()` in the installation path to execute commands in the installer's security context when the context menu component is selected. This issue is fixed in version 8.9.7. |
| Rekor is a software supply chain transparency log. Starting in version 0.3.0 and prior to version 1.5.2, the `Package.Unmarshal()` function in `pkg/types/alpine/apk.go` decompresses the signature and control gzip members of an APK file into in-memory buffers without bounding the total decompressed size. The existing `max_apk_metadata_size` check (default 1MB) is only applied to individual tar entry header sizes after decompression completes, so it does not prevent a decompression bomb from consuming unbounded heap memory. An attacker can craft a gzip stream that compresses at a ~1000:1 ratio (e.g., 2MB compressed zeros → 2GB decompressed). When submitted as spec.package.content in an Alpine `ProposedEntry`, the server decompresses the full payload into memory during request processing, triggering a fatal Go runtime out-of-memory error or OS OOM-kill that cannot be caught by the server's recover() middleware. This is reachable via two unauthenticated endpoints, `POST /api/v1/log/entries (createLogEntry)` and `POST /api/v1/log/entries/retrieve (searchLogQuery)`. Both invoke `V001Entry.Canonicalize()` → `fetchExternalEntities()` → `apk.Unmarshal(packageData)`, which performs the unbounded decompression. Version 1.5.2 patches the issue. There is no effective workaround. Setting `max_request_body_size` reduces but does not eliminate exposure due to the ~1000:1 compression ratio (a 1MB body limit still allows ~1GB heap allocation). Setting `max_apk_metadata_size` has no effect on this vulnerability since the check is applied after decompression. |
