| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
The user of k3_udma_glue_reset_rx_chn() e.g. ti_am65_cpsw_nuss can
run on multiple platforms having different DMA architectures.
On some platforms there can be one FDQ for all flows in the RX channel
while for others there is a separate FDQ for each flow in the RX channel.
So far we have been relying on the skip_fdq argument of
k3_udma_glue_reset_rx_chn().
Instead of relying on the user to provide this information, infer it
based on DMA architecture during k3_udma_glue_request_rx_chn() and save it
in an internal flag 'single_fdq'. Use that flag at
k3_udma_glue_reset_rx_chn() to deicide if the FDQ needs
to be cleared for every flow or just for flow 0.
Fixes the below issue on ti_am65_cpsw_nuss driver on AM62-SK.
> ip link set eth1 down
> ip link set eth0 down
> ethtool -L eth0 rx 8
> ip link set eth0 up
> modprobe -r ti_am65_cpsw_nuss
[ 103.045726] ------------[ cut here ]------------
[ 103.050505] k3_knav_desc_pool size 512000 != avail 64000
[ 103.050703] WARNING: CPU: 1 PID: 450 at drivers/net/ethernet/ti/k3-cppi-desc-pool.c:33 k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.068810] Modules linked in: ti_am65_cpsw_nuss(-) k3_cppi_desc_pool snd_soc_hdmi_codec crct10dif_ce snd_soc_simple_card snd_soc_simple_card_utils display_connector rtc_ti_k3 k3_j72xx_bandgap tidss drm_client_lib snd_soc_davinci_mcas
p drm_dma_helper tps6598x phylink snd_soc_ti_udma rti_wdt drm_display_helper snd_soc_tlv320aic3x_i2c typec at24 phy_gmii_sel snd_soc_ti_edma snd_soc_tlv320aic3x sii902x snd_soc_ti_sdma sa2ul omap_mailbox drm_kms_helper authenc cfg80211 r
fkill fuse drm drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [last unloaded: k3_cppi_desc_pool]
[ 103.119950] CPU: 1 UID: 0 PID: 450 Comm: modprobe Not tainted 6.13.0-rc7-00001-g9c5e3435fa66 #1011
[ 103.119968] Hardware name: Texas Instruments AM625 SK (DT)
[ 103.119974] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 103.119983] pc : k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.148007] lr : k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.154709] sp : ffff8000826ebbc0
[ 103.158015] x29: ffff8000826ebbc0 x28: ffff0000090b6300 x27: 0000000000000000
[ 103.165145] x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000019df6b0
[ 103.172271] x23: ffff0000019df6b8 x22: ffff0000019df410 x21: ffff8000826ebc88
[ 103.179397] x20: 000000000007d000 x19: ffff00000a3b3000 x18: 0000000000000000
[ 103.186522] x17: 0000000000000000 x16: 0000000000000000 x15: 000001e8c35e1cde
[ 103.193647] x14: 0000000000000396 x13: 000000000000035c x12: 0000000000000000
[ 103.200772] x11: 000000000000003a x10: 00000000000009c0 x9 : ffff8000826eba20
[ 103.207897] x8 : ffff0000090b6d20 x7 : ffff00007728c180 x6 : ffff00007728c100
[ 103.215022] x5 : 0000000000000001 x4 : ffff000000508a50 x3 : ffff7ffff6146000
[ 103.222147] x2 : 0000000000000000 x1 : e300b4173ee6b200 x0 : 0000000000000000
[ 103.229274] Call trace:
[ 103.231714] k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool] (P)
[ 103.238408] am65_cpsw_nuss_free_rx_chns+0x28/0x4c [ti_am65_cpsw_nuss]
[ 103.244942] devm_action_release+0x14/0x20
[ 103.249040] release_nodes+0x3c/0x68
[ 103.252610] devres_release_all+0x8c/0xdc
[ 103.256614] device_unbind_cleanup+0x18/0x60
[ 103.260876] device_release_driver_internal+0xf8/0x178
[ 103.266004] driver_detach+0x50/0x9c
[ 103.269571] bus_remove_driver+0x6c/0xbc
[ 103.273485] driver_unregister+0x30/0x60
[ 103.277401] platform_driver_unregister+0x14/0x20
[ 103.282096] am65_cpsw_nuss_driver_exit+0x18/0xff4 [ti_am65_cpsw_nuss]
[ 103.288620] __arm64_sys_delete_module+0x17c/0x25c
[ 103.293404] invoke_syscall+0x44/0x100
[ 103.297149] el0_svc_common.constprop.0+0xc0/0xe0
[ 103.301845] do_el0_svc+0x1c/0x28
[ 103.305155] el0_svc+0x28/0x98
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
The H616 manual does not state that the GPU PLL supports
dynamic frequency configuration, so we must take extra care when changing
the frequency. Currently any attempt to do device DVFS on the GPU lead
to panfrost various ooops, and GPU hangs.
The manual describes the algorithm for changing the PLL
frequency, which the CPU PLL notifier code already support, so we reuse
that to reparent the GPU clock to GPU1 clock during frequency
changes. |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: avoid sleepable page allocation from atomic context
apply_to_pte_range() enters the lazy MMU mode and then invokes
kasan_populate_vmalloc_pte() callback on each page table walk iteration.
However, the callback can go into sleep when trying to allocate a single
page, e.g. if an architecutre disables preemption on lazy MMU mode enter.
On s390 if make arch_enter_lazy_mmu_mode() -> preempt_enable() and
arch_leave_lazy_mmu_mode() -> preempt_disable(), such crash occurs:
[ 0.663336] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:321
[ 0.663348] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd
[ 0.663358] preempt_count: 1, expected: 0
[ 0.663366] RCU nest depth: 0, expected: 0
[ 0.663375] no locks held by kthreadd/2.
[ 0.663383] Preemption disabled at:
[ 0.663386] [<0002f3284cbb4eda>] apply_to_pte_range+0xfa/0x4a0
[ 0.663405] CPU: 0 UID: 0 PID: 2 Comm: kthreadd Not tainted 6.15.0-rc5-gcc-kasan-00043-gd76bb1ebb558-dirty #162 PREEMPT
[ 0.663408] Hardware name: IBM 3931 A01 701 (KVM/Linux)
[ 0.663409] Call Trace:
[ 0.663410] [<0002f3284c385f58>] dump_stack_lvl+0xe8/0x140
[ 0.663413] [<0002f3284c507b9e>] __might_resched+0x66e/0x700
[ 0.663415] [<0002f3284cc4f6c0>] __alloc_frozen_pages_noprof+0x370/0x4b0
[ 0.663419] [<0002f3284ccc73c0>] alloc_pages_mpol+0x1a0/0x4a0
[ 0.663421] [<0002f3284ccc8518>] alloc_frozen_pages_noprof+0x88/0xc0
[ 0.663424] [<0002f3284ccc8572>] alloc_pages_noprof+0x22/0x120
[ 0.663427] [<0002f3284cc341ac>] get_free_pages_noprof+0x2c/0xc0
[ 0.663429] [<0002f3284cceba70>] kasan_populate_vmalloc_pte+0x50/0x120
[ 0.663433] [<0002f3284cbb4ef8>] apply_to_pte_range+0x118/0x4a0
[ 0.663435] [<0002f3284cbc7c14>] apply_to_pmd_range+0x194/0x3e0
[ 0.663437] [<0002f3284cbc99be>] __apply_to_page_range+0x2fe/0x7a0
[ 0.663440] [<0002f3284cbc9e88>] apply_to_page_range+0x28/0x40
[ 0.663442] [<0002f3284ccebf12>] kasan_populate_vmalloc+0x82/0xa0
[ 0.663445] [<0002f3284cc1578c>] alloc_vmap_area+0x34c/0xc10
[ 0.663448] [<0002f3284cc1c2a6>] __get_vm_area_node+0x186/0x2a0
[ 0.663451] [<0002f3284cc1e696>] __vmalloc_node_range_noprof+0x116/0x310
[ 0.663454] [<0002f3284cc1d950>] __vmalloc_node_noprof+0xd0/0x110
[ 0.663457] [<0002f3284c454b88>] alloc_thread_stack_node+0xf8/0x330
[ 0.663460] [<0002f3284c458d56>] dup_task_struct+0x66/0x4d0
[ 0.663463] [<0002f3284c45be90>] copy_process+0x280/0x4b90
[ 0.663465] [<0002f3284c460940>] kernel_clone+0xd0/0x4b0
[ 0.663467] [<0002f3284c46115e>] kernel_thread+0xbe/0xe0
[ 0.663469] [<0002f3284c4e440e>] kthreadd+0x50e/0x7f0
[ 0.663472] [<0002f3284c38c04a>] __ret_from_fork+0x8a/0xf0
[ 0.663475] [<0002f3284ed57ff2>] ret_from_fork+0xa/0x38
Instead of allocating single pages per-PTE, bulk-allocate the shadow
memory prior to applying kasan_populate_vmalloc_pte() callback on a page
range. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: Don't access ifa_index when missing
In mctp_dump_addrinfo, ifa_index can be used to filter interfaces, but
only when the struct ifaddrmsg is provided. Otherwise it will be
comparing to uninitialised memory - reproducible in the syzkaller case from
dhcpd, or busybox "ip addr show".
The kernel MCTP implementation has always filtered by ifa_index, so
existing userspace programs expecting to dump MCTP addresses must
already be passing a valid ifa_index value (either 0 or a real index).
BUG: KMSAN: uninit-value in mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128
mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128
rtnl_dump_all+0x3ec/0x5b0 net/core/rtnetlink.c:4380
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6824
netlink_dump+0x97b/0x1690 net/netlink/af_netlink.c:2309 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
If dma-coherent property isn't set then descriptors are non-cacheable
and the iocc shareability bits should be disabled. Without this UFS can
end up in an incompatible configuration and suffer from random cache
related stability issues. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent rename with empty string
Client can send empty newname string to ksmbd server.
It will cause a kernel oops from d_alloc.
This patch return the error when attempting to rename
a file or directory with an empty new name string. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix UAF in __close_file_table_ids
A use-after-free is possible if one thread destroys the file
via __ksmbd_close_fd while another thread holds a reference to
it. The existing checks on fp->refcount are not sufficient to
prevent this.
The fix takes ft->lock around the section which removes the
file from the file table. This prevents two threads acquiring the
same file pointer via __close_file_table_ids, as well as the other
functions which retrieve a file from the IDR and which already use
this same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue
When the task management thread processes reply queues while the reset
thread resets them, the task management thread accesses an invalid queue ID
(0xFFFF), set by the reset thread, which points to unallocated memory,
causing a crash.
Add flag 'io_admin_reset_sync' to synchronize access between the reset,
I/O, and admin threads. Before a reset, the reset handler sets this flag to
block I/O and admin processing threads. If any thread bypasses the initial
check, the reset thread waits up to 10 seconds for processing to finish. If
the wait exceeds 10 seconds, the controller is marked as unrecoverable. |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix NULL dereferences in ef100_process_design_param()
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx->net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: harden block_group::bg_list against list_del() races
As far as I can tell, these calls of list_del_init() on bg_list cannot
run concurrently with btrfs_mark_bg_unused() or btrfs_mark_bg_to_reclaim(),
as they are in transaction error paths and situations where the block
group is readonly.
However, if there is any chance at all of racing with mark_bg_unused(),
or a different future user of bg_list, better to be safe than sorry.
Otherwise we risk the following interleaving (bg_list refcount in parens)
T1 (some random op) T2 (btrfs_mark_bg_unused)
!list_empty(&bg->bg_list); (1)
list_del_init(&bg->bg_list); (1)
list_move_tail (1)
btrfs_put_block_group (0)
btrfs_delete_unused_bgs
bg = list_first_entry
list_del_init(&bg->bg_list);
btrfs_put_block_group(bg); (-1)
Ultimately, this results in a broken ref count that hits zero one deref
early and the real final deref underflows the refcount, resulting in a WARNING. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: debugfs hang_hws skip GPU with MES
debugfs hang_hws is used by GPU reset test with HWS, for MES this crash
the kernel with NULL pointer access because dqm->packet_mgr is not setup
for MES path.
Skip GPU with MES for now, MES hang_hws debugfs interface will be
supported later. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl-qspi: use devm function instead of driver remove
Driver use devm APIs to manage clk/irq/resources and register the spi
controller, but the legacy remove function will be called first during
device detach and trigger kernel panic. Drop the remove function and use
devm_add_action_or_reset() for driver cleanup to ensure the release
sequence.
Trigger kernel panic on i.MX8MQ by
echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix kmemleak warning for percpu hashmap
Vlad Poenaru reported the following kmemleak issue:
unreferenced object 0x606fd7c44ac8 (size 32):
backtrace (crc 0):
pcpu_alloc_noprof+0x730/0xeb0
bpf_map_alloc_percpu+0x69/0xc0
prealloc_init+0x9d/0x1b0
htab_map_alloc+0x363/0x510
map_create+0x215/0x3a0
__sys_bpf+0x16b/0x3e0
__x64_sys_bpf+0x18/0x20
do_syscall_64+0x7b/0x150
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Further investigation shows the reason is due to not 8-byte aligned
store of percpu pointer in htab_elem_set_ptr():
*(void __percpu **)(l->key + key_size) = pptr;
Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size
is 4, that means pptr is stored in a location which is 4 byte aligned but
not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based
on 8 byte stride, so it won't detect above pptr, hence reporting the memory
leak.
In htab_map_alloc(), we already have
htab->elem_size = sizeof(struct htab_elem) +
round_up(htab->map.key_size, 8);
if (percpu)
htab->elem_size += sizeof(void *);
else
htab->elem_size += round_up(htab->map.value_size, 8);
So storing pptr with 8-byte alignment won't cause any problem and can fix
kmemleak too.
The issue can be reproduced with bpf selftest as well:
1. Enable CONFIG_DEBUG_KMEMLEAK config
2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c.
The purpose is to keep map available so kmemleak can be detected.
3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Keep write operations atomic
syzbot reported a NULL pointer dereference in __generic_file_write_iter. [1]
Before the write operation is completed, the user executes ioctl[2] to clear
the compress flag of the file, which causes the is_compressed() judgment to
return 0, further causing the program to enter the wrong process and call the
wrong ops ntfs_aops_cmpr, which triggers the null pointer dereference of
write_begin.
Use inode lock to synchronize ioctl and write to avoid this case.
[1]
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000006
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=000000011896d000
[0000000000000000] pgd=0800000118b44403, p4d=0800000118b44403, pud=0800000117517403, pmd=0000000000000000
Internal error: Oops: 0000000086000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 UID: 0 PID: 6427 Comm: syz-executor347 Not tainted 6.13.0-rc3-syzkaller-g573067a5a685 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : generic_perform_write+0x29c/0x868 mm/filemap.c:4055
sp : ffff80009d4978a0
x29: ffff80009d4979c0 x28: dfff800000000000 x27: ffff80009d497bc8
x26: 0000000000000000 x25: ffff80009d497960 x24: ffff80008ba71c68
x23: 0000000000000000 x22: ffff0000c655dac0 x21: 0000000000001000
x20: 000000000000000c x19: 1ffff00013a92f2c x18: ffff0000e183aa1c
x17: 0004060000000014 x16: ffff800083275834 x15: 0000000000000001
x14: 0000000000000000 x13: 0000000000000001 x12: ffff0000c655dac0
x11: 0000000000ff0100 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff80009d497980 x4 : ffff80009d497960 x3 : 0000000000001000
x2 : 0000000000000000 x1 : ffff0000e183a928 x0 : ffff0000d60b0fc0
Call trace:
0x0 (P)
__generic_file_write_iter+0xfc/0x204 mm/filemap.c:4156
ntfs_file_write_iter+0x54c/0x630 fs/ntfs3/file.c:1267
new_sync_write fs/read_write.c:586 [inline]
vfs_write+0x920/0xcf4 fs/read_write.c:679
ksys_write+0x15c/0x26c fs/read_write.c:731
__do_sys_write fs/read_write.c:742 [inline]
__se_sys_write fs/read_write.c:739 [inline]
__arm64_sys_write+0x7c/0x90 fs/read_write.c:739
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762
[2]
ioctl$FS_IOC_SETFLAGS(r0, 0x40086602, &(0x7f00000000c0)=0x20) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF in decryption with multichannel
After commit f7025d861694 ("smb: client: allocate crypto only for
primary server") and commit b0abcd65ec54 ("smb: client: fix UAF in
async decryption"), the channels started reusing AEAD TFM from primary
channel to perform synchronous decryption, but that can't done as
there could be multiple cifsd threads (one per channel) simultaneously
accessing it to perform decryption.
This fixes the following KASAN splat when running fstest generic/249
with 'vers=3.1.1,multichannel,max_channels=4,seal' against Windows
Server 2022:
BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xba/0x110
Read of size 8 at addr ffff8881046c18a0 by task cifsd/986
CPU: 3 UID: 0 PID: 986 Comm: cifsd Not tainted 6.15.0-rc1 #1
PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41
04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
print_report+0x156/0x528
? gf128mul_4k_lle+0xba/0x110
? __virt_addr_valid+0x145/0x300
? __phys_addr+0x46/0x90
? gf128mul_4k_lle+0xba/0x110
kasan_report+0xdf/0x1a0
? gf128mul_4k_lle+0xba/0x110
gf128mul_4k_lle+0xba/0x110
ghash_update+0x189/0x210
shash_ahash_update+0x295/0x370
? __pfx_shash_ahash_update+0x10/0x10
? __pfx_shash_ahash_update+0x10/0x10
? __pfx_extract_iter_to_sg+0x10/0x10
? ___kmalloc_large_node+0x10e/0x180
? __asan_memset+0x23/0x50
crypto_ahash_update+0x3c/0xc0
gcm_hash_assoc_remain_continue+0x93/0xc0
crypt_message+0xe09/0xec0 [cifs]
? __pfx_crypt_message+0x10/0x10 [cifs]
? _raw_spin_unlock+0x23/0x40
? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs]
decrypt_raw_data+0x229/0x380 [cifs]
? __pfx_decrypt_raw_data+0x10/0x10 [cifs]
? __pfx_cifs_read_iter_from_socket+0x10/0x10 [cifs]
smb3_receive_transform+0x837/0xc80 [cifs]
? __pfx_smb3_receive_transform+0x10/0x10 [cifs]
? __pfx___might_resched+0x10/0x10
? __pfx_smb3_is_transform_hdr+0x10/0x10 [cifs]
cifs_demultiplex_thread+0x692/0x1570 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? rcu_lockdep_current_cpu_online+0x62/0xb0
? find_held_lock+0x32/0x90
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xd/0xd0
? trace_irq_enable.constprop.0+0xa8/0xe0
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0x1fe/0x380
? kthread+0x10f/0x380
? __pfx_kthread+0x10/0x10
? local_clock_noinstr+0xd/0xd0
? ret_from_fork+0x1b/0x60
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
? rcu_is_watching+0x20/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix hang while freeing sigtrap event
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadloop in prepare_compress_overwrite()
Jan Prusakowski reported a kernel hang issue as below:
When running xfstests on linux-next kernel (6.14.0-rc3, 6.12) I
encountered a problem in generic/475 test where fsstress process
gets blocked in __f2fs_write_data_pages() and the test hangs.
The options I used are:
MKFS_OPTIONS -- -O compression -O extra_attr -O project_quota -O quota /dev/vdc
MOUNT_OPTIONS -- -o acl,user_xattr -o discard,compress_extension=* /dev/vdc /vdc
INFO: task kworker/u8:0:11 blocked for more than 122 seconds.
Not tainted 6.14.0-rc3-xfstests-lockdep #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:0 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208160 flags:0x00004000
Workqueue: writeback wb_workfn (flush-253:0)
Call Trace:
<TASK>
__schedule+0x309/0x8e0
schedule+0x3a/0x100
schedule_preempt_disabled+0x15/0x30
__mutex_lock+0x59a/0xdb0
__f2fs_write_data_pages+0x3ac/0x400
do_writepages+0xe8/0x290
__writeback_single_inode+0x5c/0x360
writeback_sb_inodes+0x22f/0x570
wb_writeback+0xb0/0x410
wb_do_writeback+0x47/0x2f0
wb_workfn+0x5a/0x1c0
process_one_work+0x223/0x5b0
worker_thread+0x1d5/0x3c0
kthread+0xfd/0x230
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
The root cause is: once generic/475 starts toload error table to dm
device, f2fs_prepare_compress_overwrite() will loop reading compressed
cluster pages due to IO error, meanwhile it has held .writepages lock,
it can block all other writeback tasks.
Let's fix this issue w/ below changes:
- add f2fs_handle_page_eio() in prepare_compress_overwrite() to
detect IO error.
- detect cp_error earler in f2fs_read_multi_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix block group refcount race in btrfs_create_pending_block_groups()
Block group creation is done in two phases, which results in a slightly
unintuitive property: a block group can be allocated/deallocated from
after btrfs_make_block_group() adds it to the space_info with
btrfs_add_bg_to_space_info(), but before creation is completely completed
in btrfs_create_pending_block_groups(). As a result, it is possible for a
block group to go unused and have 'btrfs_mark_bg_unused' called on it
concurrently with 'btrfs_create_pending_block_groups'. This causes a
number of issues, which were fixed with the block group flag
'BLOCK_GROUP_FLAG_NEW'.
However, this fix is not quite complete. Since it does not use the
unused_bg_lock, it is possible for the following race to occur:
btrfs_create_pending_block_groups btrfs_mark_bg_unused
if list_empty // false
list_del_init
clear_bit
else if (test_bit) // true
list_move_tail
And we get into the exact same broken ref count and invalid new_bgs
state for transaction cleanup that BLOCK_GROUP_FLAG_NEW was designed to
prevent.
The broken refcount aspect will result in a warning like:
[1272.943527] refcount_t: underflow; use-after-free.
[1272.943967] WARNING: CPU: 1 PID: 61 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
[1272.944731] Modules linked in: btrfs virtio_net xor zstd_compress raid6_pq null_blk [last unloaded: btrfs]
[1272.945550] CPU: 1 UID: 0 PID: 61 Comm: kworker/u32:1 Kdump: loaded Tainted: G W 6.14.0-rc5+ #108
[1272.946368] Tainted: [W]=WARN
[1272.946585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[1272.947273] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[1272.947788] RIP: 0010:refcount_warn_saturate+0xba/0x110
[1272.949532] RSP: 0018:ffffbf1200247df0 EFLAGS: 00010282
[1272.949901] RAX: 0000000000000000 RBX: ffffa14b00e3f800 RCX: 0000000000000000
[1272.950437] RDX: 0000000000000000 RSI: ffffbf1200247c78 RDI: 00000000ffffdfff
[1272.950986] RBP: ffffa14b00dc2860 R08: 00000000ffffdfff R09: ffffffff90526268
[1272.951512] R10: ffffffff904762c0 R11: 0000000063666572 R12: ffffa14b00dc28c0
[1272.952024] R13: 0000000000000000 R14: ffffa14b00dc2868 R15: 000001285dcd12c0
[1272.952850] FS: 0000000000000000(0000) GS:ffffa14d33c40000(0000) knlGS:0000000000000000
[1272.953458] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1272.953931] CR2: 00007f838cbda000 CR3: 000000010104e000 CR4: 00000000000006f0
[1272.954474] Call Trace:
[1272.954655] <TASK>
[1272.954812] ? refcount_warn_saturate+0xba/0x110
[1272.955173] ? __warn.cold+0x93/0xd7
[1272.955487] ? refcount_warn_saturate+0xba/0x110
[1272.955816] ? report_bug+0xe7/0x120
[1272.956103] ? handle_bug+0x53/0x90
[1272.956424] ? exc_invalid_op+0x13/0x60
[1272.956700] ? asm_exc_invalid_op+0x16/0x20
[1272.957011] ? refcount_warn_saturate+0xba/0x110
[1272.957399] btrfs_discard_cancel_work.cold+0x26/0x2b [btrfs]
[1272.957853] btrfs_put_block_group.cold+0x5d/0x8e [btrfs]
[1272.958289] btrfs_discard_workfn+0x194/0x380 [btrfs]
[1272.958729] process_one_work+0x130/0x290
[1272.959026] worker_thread+0x2ea/0x420
[1272.959335] ? __pfx_worker_thread+0x10/0x10
[1272.959644] kthread+0xd7/0x1c0
[1272.959872] ? __pfx_kthread+0x10/0x10
[1272.960172] ret_from_fork+0x30/0x50
[1272.960474] ? __pfx_kthread+0x10/0x10
[1272.960745] ret_from_fork_asm+0x1a/0x30
[1272.961035] </TASK>
[1272.961238] ---[ end trace 0000000000000000 ]---
Though we have seen them in the async discard workfn as well. It is
most likely to happen after a relocation finishes which cancels discard,
tears down the block group, etc.
Fix this fully by taking the lock arou
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Remove broken autobind
Binding AX25 socket by using the autobind feature leads to memory leaks
in ax25_connect() and also refcount leaks in ax25_release(). Memory
leak was detected with kmemleak:
================================================================
unreferenced object 0xffff8880253cd680 (size 96):
backtrace:
__kmalloc_node_track_caller_noprof (./include/linux/kmemleak.h:43)
kmemdup_noprof (mm/util.c:136)
ax25_rt_autobind (net/ax25/ax25_route.c:428)
ax25_connect (net/ax25/af_ax25.c:1282)
__sys_connect_file (net/socket.c:2045)
__sys_connect (net/socket.c:2064)
__x64_sys_connect (net/socket.c:2067)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
================================================================
When socket is bound, refcounts must be incremented the way it is done
in ax25_bind() and ax25_setsockopt() (SO_BINDTODEVICE). In case of
autobind, the refcounts are not incremented.
This bug leads to the following issue reported by Syzkaller:
================================================================
ax25_connect(): syz-executor318 uses autobind, please contact jreuter@yaina.de
------------[ cut here ]------------
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 5317 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Modules linked in:
CPU: 0 UID: 0 PID: 5317 Comm: syz-executor318 Not tainted 6.14.0-rc4-syzkaller-00278-gece144f151ac #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
...
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x6af/0x7e0 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4302 [inline]
netdev_put include/linux/netdevice.h:4319 [inline]
ax25_release+0x368/0x960 net/ax25/af_ax25.c:1080
__sock_release net/socket.c:647 [inline]
sock_close+0xbc/0x240 net/socket.c:1398
__fput+0x3e9/0x9f0 fs/file_table.c:464
__do_sys_close fs/open.c:1580 [inline]
__se_sys_close fs/open.c:1565 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1565
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Considering the issues above and the comments left in the code that say:
"check if we can remove this feature. It is broken."; "autobinding in this
may or may not work"; - it is better to completely remove this feature than
to fix it because it is broken and leads to various kinds of memory bugs.
Now calling connect() without first binding socket will result in an
error (-EINVAL). Userspace software that relies on the autobind feature
might get broken. However, this feature does not seem widely used with
this specific driver as it was not reliable at any point of time, and it
is already broken anyway. E.g. ax25-tools and ax25-apps packages for
popular distributions do not use the autobind feature for AF_AX25.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix r_count dec/increment mismatch
r_count is only increased when there is an oplock break wait,
so r_count inc/decrement are not paired. This can cause r_count
to become negative, which can lead to a problem where the ksmbd
thread does not terminate. |
