| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto()
Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before
using it to compute the header size, avoiding out-of-bounds access with
malformed IP headers.
While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP
constant when setting ctx->tun.proto and reference ctx->tun.hdr_size
when updating ctx->offset. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling
ams_event_to_channel() may return a pointer past the end of
dev->channels when no matching scan_index is found. This can lead
to invalid memory access in ams_handle_event().
Add a bounds check in ams_event_to_channel() and return NULL when
no channel is found. Also guard the caller to safely handle this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: add bounds check for USB channel index
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: hdac_hdmi: Validate written enum value
hdac_hdmi_set_pin_port_mux() uses the written enum value to index the
texts array before calling snd_soc_dapm_put_enum_double(), which validates
that the value is within the enum item range.
An out-of-range value can therefore make the driver read past the texts
array before the helper rejects the write. Move the lookup after the helper
has accepted the value. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix OOB read during CQ MR registration
Sashiko pointed out an unrelated bug during a previous patch:
https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com
This change fixes the bug by eliminating the cqmr->split field which
was not being set properly and instead just checks the CQ resize
feature flag directly.
The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE
is set, but it was not being set until CQ creation time, which is _after_
CQ memory registration (the only other place where it is referenced).
As a result, it would always be false during MR registration and would
therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2
HW and beyond:
cqmr->shadow = (dma_addr_t)arr[req->cq_pages];
The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal
to iwmr->page_cnt and therefore equal to the size of arr, which would cause
an OOB read by one. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix FDP fdpcidx bounds check
The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=,
incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Adjust size for copy_to_user()
The amount of data returned to user space should be limited by the buffer
size provided by the application. If the buffer is smaller than the data
size, return only the portion that fits instead of failing. |
| libvips is a fast image processing library with low memory needs. Prior to version 8.18.3, libvips built with libultrahdr support can incorrectly size an output buffer in libvips/foreign/uhdrsave.c within vips_foreign_save_uhdr_set_raw_hdr when a pipeline enlarges an incoming JPEG to a very large output before encoding a gain map through VipsForeignSaveUhdr. The undersized allocation can cause a heap buffer over-read that may disclose adjacent data or crash the process. This issue is fixed in version 8.18.3. |
| libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted image sequence with a 2x2 primary plane and a 256x256 auxiliary alpha plane can cause attacker-controlled heap corruption during a normal decode and re-encode workflow. Track_Visual::decode_next_image_sample() calls transfer_channel_from_image_as() without checking that the auxiliary alpha dimensions match the main frame. The resulting inconsistent image reaches heif_track_decode_next_image() and then heif_context_encode_image(). In unc_encoder::encode(), unc_encoder_component_interleave::encode_tile() sizes its buffer with compute_tile_data_size_bytes() using the primary dimensions but copies each component using its actual plane dimensions. The oversized alpha plane is therefore copied beyond the allocation, causing an out-of-bounds write; the inverse size mismatch can also produce an out-of-bounds read. This issue is fixed in version 1.23.1. |
| An out-of-bounds read vulnerability was found in swtpm's SWTPM_NVRAM_CheckHeader() function. The entry guard checks the buffer length against sizeof(bh), where bh is a pointer, instead of sizeof(*bh), the actual struct size. This allows an undersized buffer to pass validation, causing a 2-byte heap overread on 64-bit systems (6 bytes on 32-bit) when accessing the totlen field. This may cause daemon termination on some platforms and leaks heap data to the log. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: Validate length before parsing diagnostics TLV
btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.
Fix by validating the length before access. |
| Sony XAV-9500ES prh_l2_decode_packet Out-Of-Bounds Read Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability.
The specific flaw exists within the handling of Bluetooth L2CAP packets. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the device. Was ZDI-CAN-28990. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-67306. Reason: This candidate is a duplicate of CVE-2026-67306. Notes: All CVE users should reference CVE-2026-67306 instead of this candidate. |
| PyTorch torchvision through 0.28.0, fixed in commit 4e05dc2, contains an out-of-bounds heap read vulnerability in the GIF decoder's read_from_tensor callback that passes unclamped length to memcpy. Attackers can supply malicious or truncated GIF files to cause denial of service via segmentation fault or disclose adjacent heap memory contents. |
| libvips is a fast image processing library with low memory needs. Prior to version 8.18.3, the old-style Radiance RLE decoder in libvips/foreign/radiance.c can process a repeat marker at the beginning of a scanline in scanline_read_old and read q[-1] before any prior pixel exists. A crafted Radiance image loaded through VipsForeignLoadRad can therefore disclose four bytes of adjacent heap data, most likely other image data. This issue is fixed in version 8.18.3. |
| Capstone is a disassembly framework. In 6.0.0-Alpha9 and earlier, Capstone's arch/SH/SHDisassembler.c sh_disassemble() function computes an idx value from a raw 16-bit instruction without ensuring it is within the active mode-specific decode[] function-pointer table. An application using CS_ARCH_SH with CS_MODE_SH2A or CS_MODE_SH4A and CS_MODE_SHFPU can pass crafted bytecode through cs_disasm_iter() or cs_disasm(), causing the decode[idx] test to read outside the table and terminate the process with a segmentation fault. No code execution or information disclosure was demonstrated. This issue is fixed in version 6.0.0-Alpha10. |
| A flaw was found in the PCP (Performance Co-Pilot) `pmproxy` service. A remote attacker can exploit a vulnerability in the `pmLogLoadInDom()` function by sending a specially crafted request. This bypasses a critical bounds check, which can lead to the `pmproxy` service crashing, causing a Denial of Service (DoS). Additionally, this flaw may enable the leakage of sensitive information from the system's memory. |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent can read beyond a contiguous evbuffer region in event_tagging.c when decode_tag_internal requests at most five bytes from evbuffer_pullup but iterates using the full logical buffer length. A fragmented evbuffer containing a six-byte malformed tag can therefore advance past the pullup window and trigger an out-of-bounds read, which can crash a process that decodes attacker-controlled tagged RPC data. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. |
| A memory-corruption vulnerability exists in a kernel-mode component of BeyondTrust Endpoint Privilege Management (Windows deployments) prior to version 26.1.2. Insufficient validation of input processed by the component may result in memory being accessed outside its intended bounds. |
