| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_gre: make ipgre_header() robust
Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 |
| Initialization of a Resource with an Insecure Default vulnerability in Hallo Welt! GmbH BlueSpice (container image bluespice/wiki) allows privilege escalation. The default value of $mwsgTokenAuthenticatorServiceCIDR in the container's LocalSettings.php was intended to restrict internal service authentication to the container network, but evaluated to an empty string when the environment variable WIKI_SERVICE_TOKEN_AUTH_ALLOWED was not set. An empty value disables the IP restriction in the token authenticator component (mwstake/mediawiki-component-token-authenticator). As a result, any user with read access to the wiki (anonymous users on publicly readable wikis) could obtain an application token from the REST API and use it to get a session with sysop privileges as the internal service user.
This issue affects BlueSpice: from 5.2.3 before 5.2.7, and the 5.2.7 container images published before 2026-10-19 15:37 UTC. |
| `JweDirectDecryptorBlock.Decrypt` read a 64-bit plaintext length from the `_thales_aad` protected-header field and used it without any validation. A truncated field panics `binary.BigEndian.Uint64`, an oversized value drives an unbounded allocation, and a value larger than the decrypted block panics with a slice-bounds error. |
| gose parsed the JWS `crit` header into `JwsHeader.Crit` and then never read it. RFC 7515 §4.1.11 requires a recipient to reject a JWS whose listed critical extension parameters it does not understand. gose implements no header extensions, so every token carrying a non-empty `crit` should have been rejected — and none were. |
| A flaw was found in the iscsiuio component of open-iscsi. The DHCPv6 option parser calls strlen() on raw network data without ensuring a NUL terminator is present, causing it to read past the buffer into heap memory. This can result in a daemon crash, a 1-byte heap overwrite, or corruption of the iSCSI initiator name. An attacker on the same network segment can trigger this by sending a crafted DHCPv6 Advertise message. |
| Buffer Overflow vulnerability in WEINVEIW CO.,LTD EBPro v.6.10.01.510_20251022 allows a remote attacker to execute arbitrary code via the UtilityManagerEx.exe component |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: reject too-short SGL segments
The host controls an SGL segment's length. A nonzero length smaller than
one SGL descriptor makes nr_descs zero, so
nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside
the allocated buffer. If that byte contains a segment descriptor type,
the function also copies the preceding 16 bytes and returns a negative
descriptor count.
The read was reproduced in 3/3 KASAN boots with only the host transfer
mocked by a KUnit test:
BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment
Read of size 1 by task kunit_try_catch
Call Trace:
nvmet_pci_epf_get_sgl_segment
nvmet_pci_epf_short_sgl_test
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Reject segments that cannot hold one descriptor before allocating or
transferring their contents. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, the default RFC 7523 JWTBearerGrant.get_audiences() returns an empty list, causing JWTBearerGrant.verify_claims() to require only that an aud claim exists without matching the current authorization server. An attacker holding a legitimate assertion for another service can present it to a server that shares the signing key and uses the default grant, obtaining an access token across a trust boundary. Implementations that override get_audiences() with the server's valid audience identifiers are not affected. This issue is fixed in version 1.9.0. |
| OpenStack Ironic before 39.0.1 allows DELETE and GET via vendor_passthru, e.g., to delete accounts from the BMC's Redfish service. |
| Missing Origin Validation in WebSockets (CWE-1385) and Permissive Cross-domain Policy with Untrusted Domains (CWE-942) in the development web server (ADK Web) in Google Agent Development Kit (ADK) for Java (com.google.adk:google-adk-dev versions 0.1.0 before 1.13.0 and com.google.adk:google-adk-maven-plugin versions 0.3.0 before 1.13.0) allow a remote attacker to control a locally running agent and read its data via a malicious web page visited by a developer while the server is running. The /run_live WebSocket endpoint accepts connections from any origin by default (hardcoded via setAllowedOrigins("*") in versions 0.1.0 through 1.5.0, and defaulting to * via adk.web.cors.origins in versions 1.6.0 through 1.12.0), and since version 0.4.0 the REST API returns Access-Control-Allow-Origin: * by default. Because the server has no authentication and requests originate from the developer's browser (so binding to localhost does not prevent exploitation), a cross-origin page can send messages to the agent (triggering registered tools), stream agent responses, and list, read, create, or delete sessions and artifacts. In versions 1.6.0 through 1.12.0, users can mitigate the issue by setting the adk.web.cors.origins property to an explicit allowlist of trusted origins (such as http://localhost:8000). The vulnerability is fixed in version 1.13.0, which enforces a same-origin default for CORS and the /run_live WebSocket endpoint, and rejects DNS-rebinding requests over loopback. |
| No description provided |
| No description provided |
| No description provided |
| No description provided |
| No description provided |
| No description provided |
| No description provided |
| The MongoDB C# Driver compares TLS client certificates by issuer and serial number only when deciding whether two clients can share cached connections. In an application that creates clients from certificates supplied by different users, a user who provides a certificate copying another user's issuer and serial number, without that user's private key, can be given connections authenticated with the other user's certificate. Database operations can then run under the other user's identity, affecting the confidentiality and integrity of data that identity can access. |
| Crawl4AI 0.7.0 before 0.9.5 contains an inefficient regular expression complexity vulnerability in the Docker API server that allows authenticated API clients to supply unbounded regular expressions in /crawl request bodies. Attackers can submit catastrophic-backtracking patterns via RegexExtractionStrategy.custom, RegexChunking.patterns or JsonCss, JsonXPath and JsonLxml schema regex fields against a crafted page to freeze the entire server, including /health. |
