| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Django REST framework is a toolkit for building Web APIs. From 3.6.4 until 3.18.2, JSONParser.parse in rest_framework/parsers.py uses the client-supplied Content-Type charset value with codecs.getreader, which accepts byte-transform codecs such as bz2_codec rather than only text encodings. A remote unauthenticated client can therefore cause a compressed JSON request body to be expanded after Django has enforced DATA_UPLOAD_MAX_MEMORY_SIZE against only the wire bytes, allowing a very small request to consume substantial per-worker memory. The default parser set is sufficient, and any reachable endpoint that accepts a JSON body is affected. This issue is fixed in version 3.18.2. |
| Pillow is a Python imaging library. From 9.1.0 until 13.0.0, BmpRleDecoder.decode() in src/PIL/BmpImagePlugin.py permits crafted RLE BMP delta escapes and absolute-mode runs to append beyond the remaining dest_length without a per-branch cap. A delta can add roughly 255 image rows in one iteration, so a kilobyte-sized file with a large but permitted width can expand the data bytearray to hundreds of megabytes or more, causing memory-exhaustion denial of service. This issue is fixed in version 13.0.0. |
| Improper Handling of Highly Compressed Data (Data Amplification) in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust server memory and crash the Erlang VM via a crafted compressed SAMLResponse.
esaml_binding:decode_response/2 base64-decodes the attacker-supplied SAMLResponse, inflates it with zlib:unzip/1 with no bound on the output, then converts the result to a charlist with binary_to_list/1 before parsing. This runs on the SAML consume (ACS) and single-logout endpoints, which accept unauthenticated requests by design, and it runs before any signature check. A small deflate stream reaches a compression ratio near 1000 to 1, so a request body of tens of kilobytes inflates to hundreds of megabytes and then to several gigabytes of list heap, so a few requests exhaust memory and take the node down.
This issue affects esaml: from 0.1.0 onward. |
| Pillow is a Python imaging library. Prior to 13.0.0, MpoImageFile.seek() and DcxImageFile.seek() reparse later MPO or DCX frames and replace self._size without rerunning Image._decompression_bomb_check(). A crafted multi-frame image can use a tiny first frame to pass Image.open() and then declare an over-limit later frame. Normal frame iteration through seek(), load(), or ImageSequence.Iterator can decode that frame and commit hundreds of megabytes or more, causing memory-exhaustion denial of service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, SpiderImageFile.seek() in src/PIL/SpiderImagePlugin.py reparses a later SPIDER stack frame and replaces self._size without rerunning Image._decompression_bomb_check(). A tiny file can use a safe first frame to pass Image.open() and then declare very large dimensions in a later mode F frame. Loading that frame allocates approximately four bytes per attacker-declared pixel and can consume multiple gigabytes of memory. This issue is fixed in version 13.0.0. |
| Vulnerability in Oracle Java SE (component: Libraries). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| A flaw was found in libmodulemd. In builds with rpmio support enabled, compressed modulemd YAML is decompressed through a custom read handler that does not enforce a cumulative decompressed-size limit before parsing. An attacker who can supply a highly compressible compressed YAML file can cause excessive CPU and memory consumption, resulting in a denial of service. |
| adm-zip 0.6.0 contains a decompression bomb protection bypass that allows attackers to evade the maxOutputLength guard by targeting the asynchronous getDataAsync() path in methods/inflater.js. Attackers can craft ZIP entries with falsified small declared sizes and high-ratio DEFLATE payloads to exhaust memory in applications reading entries asynchronously. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, a crafted highly compressed MAT image can make the MAT decoder create temporary files larger than the configured security-policy limit, bypassing resource restrictions and consuming excessive disk space. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. |
| An unlimited gzip decompression routine in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows any remote client to cause a denial of service via memory exhaustion.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a gRPC endpoint does have a configurable per message maximum size in bytes, however the maximum size applies to the received bytes. When applied to a compressed message, this only applies to the compressed size and not the actual size of the uncompressed content. This can be used to force a gRPC endpoint to allocate more bytes than the value defined by the configuration, making the endpoint vulnerable to compression bomb attacks.
The impacted component is io.vertx:vertx-gprc-server. |
| CompressionUtils.inflate() decompressed attacker-controlled DEFLATE data with no output-size cap. A small (~KB) crafted payload could expand to gigabytes on the heap. Reachable via JWE decryption when zip=DEF (e.g. JoseSessionTokenProvider with RSA-OAEP key wrap) and via SAML redirect/POST binding token inflation — in both cases decompression happens before/independent of trust validation.
Fix: Added a configurable maximum inflated-size cap (default 10 MiB, org.apache.cxf.compression-max-inflated-size system property) to CompressionUtils.inflate(); aborts with DataFormatException once exceeded.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| OmniFaces is a utility library for Faces. In OmniFaces versions before 1.14.3, 2.7.33, 3.14.23, 4.7.12, and 5.4.2, CombinedResourceHandler accepts a structurally valid deflated and base64 encoded combined resource ID without verifying that the server issued it. A forged ID can cause unbounded decoded output, add unique reconstructed IDs to a process-lifetime cache, or combine resources other than stylesheets and scripts. Because jakarta.faces.RESOURCE_EXCLUDES is not applied by this custom resolution path, a forged ID can disclose Facelets source from the webapp resource tree or META-INF/resources. In a deployment configured with the wildcard CDN mapping, a forged ID that selects omnifaces.graphic can also cause a blind, deployment-dependent server-side fetch whose destination derives partly from the request Host header. The flaw does not provide arbitrary file read or establish arbitrary-scheme or arbitrary-destination SSRF. The shared authenticity failure permits memory exhaustion and limited resource disclosure. This issue is fixed in versions 1.14.3, 2.7.33, 3.14.23, 4.7.12, and 5.4.2. |
| Pillow is a Python imaging library. From 4.1.0 until 13.0.0, Pillow's MSP RLE decoder can expand a small file into an unbounded in-memory buffer. The decoder writes run-length output to BytesIO without limiting expansion to the declared image size. An attacker can supply a crafted MSP image to an application that loads its pixels. This can exhaust memory and deny service even when the declared pixel count passes the decompression-bomb check. This issue is fixed in version 13.0.0. |
| Fleet before 4.83.0 contains a denial of service vulnerability that allows unauthenticated attackers to exhaust server memory by sending gzip-compressed request bodies. Attackers can send small, highly compressed requests with Content-Encoding: gzip to unauthenticated endpoints that expand during decoding, crashing the entire Fleet instance. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The cowboy WebSocket options at line 117 set compress => true, enabling RFC 7692 permessage-deflate negotiation. The handler does not set max_frame_size, so cowboy's default of infinity applies. cowlib's cow_ws:parse_payload/9 calls zlib:inflate/2 on the compressed payload with no output-size limit. An attacker can negotiate permessage-deflate during the WebSocket upgrade and send a frame containing a zlib bomb (e.g. 50 KB → 5 GB). Decompression occurs in the connection process before websocket_handle/2 ever sees the MQTT bytes. An unauthenticated attacker can crash a RabbitMQ node running the Web-MQTT plugin by sending a single highly-compressed WebSocket frame (a few KB on the wire) that inflates to gigabytes in memory. The cowboy WebSocket handler decompresses the entire frame before the MQTT CONNECT packet is processed, so no credentials are required. Preconditions include rabbitmq_web_mqtt plugin enabled (not default, but common for browser clients) Network reachability to port 15675/15676 No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox
When tearing down the FW mailbox Rx ring, fbnic_mbx_reset_desc_ring()
writes AW_CFG with FLUSH set and everything else, BME included, cleared.
Clearing BME halts the device's writes to the host but leaves the staged
requests parked in the PUL write pipeline rather than draining them, so
on the write path FLUSH alone never terminates the outstanding requests
and the flush the firmware waits on never completes.
Add the FLUSH_MODE definition and set both bits so the staged writes
drain out of the pipeline on their own. BME stays cleared, so nothing
lands on the host; it is restored later in fbnic_mbx_init_desc_ring()
when the ring is rebuilt, once the outstanding writes are gone.
The read path is unaffected. AR_CFG has no equivalent mode bit and
AR_FLUSH terminates the outstanding reads by itself, so it is left as
is.
Both writes remain plain stores rather than read-modify-writes. That is
deliberate: the matching write in fbnic_mbx_init_desc_ring() restores
BME and the TLP attributes, and clears both flush bits as a side effect. |
| An Improper Handling of Highly Compressed Data vulnerability in the gRPC library used by na-grpcd of Juniper Networks Junos OS allows an authenticated network-based attacker to cause a denial of service via a compressed gRPC request. |
