Export limit exceeded: 25983 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25983 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98907 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: protect sb_write_pointer() with invalidate lock sb_write_pointer() reads the super block from the block device page cache using read_cache_page_gfp(). This has the same race with BLKBSZSET as the one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set block size"). Take the mapping invalidate lock around read_cache_page_gfp() to serialize the read against block size changes. | ||||
| CVE-2026-98906 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload. | ||||
| CVE-2026-98905 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Properly acquire queue buffers in CRIU restore When kfd_queue_acquire_buffers() was split off from set_queue_properties_from_user(), set_queue_properties_from_criu() was missed. Thus, set_queue_properties_from_criu() is not filling out the buffer fields of queue_properties, which can come up when subsequent code expects them to be non-null. Add the proper call to kfd_queue_acquire_buffers(), and also use the right cast types in set_queue_properties_from_criu() (which were missed at the same time) (cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) | ||||
| CVE-2026-98904 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Use devm_pm_runtime_enable() sashiko complained about early usage of the device while probe isn't completed. This can be mitigated by delaying the pm_runtime_enable() into the removal path instead doing it early. This ensures that in an error case the device is removed (and imx_mu_shutdown()) before pm_runtime_disable() so we don't have to do this manually. For the order to work, lets move devm_mbox_controller_register() until after the pm-runtime part. So the reverse order will be mbox-controller removal followed by disabling pm runtime. Use devm_pm_runtime_enable(), remove manual pm_runtime_disable() invocations and move the pm_runtime handling in probe before devm_mbox_controller_register(). | ||||
| CVE-2026-98903 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Add a channel shutdown field sashiko complained about possible teardown problem. The scenario CPU 0 CPU 1 imx_mu_isr() imx_mu_shutdown() imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx)); imx_mu_specific_rx() imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0); free_irq() The RX event remains enabled because in this short window the RX event was disabled in ->shutdown() while the interrupt was active and then enabled again by the ISR while ->shutdown waited in free_irq(). This race requires timing and if happens can be problematic on shared handlers if the "removed" channel triggers an interrupt. In this case the irq-core will shutdown the interrupt with the "nobody cared" message. Introduce imx_mu_con_priv::shutdown to signal that the channel is shutting down. This flag is set with the lock held (by imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which only enables the event if the channel has not been shutdown and serialises on the same lock. | ||||
| CVE-2026-98902 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: let stripe batch bm_seq comparison wrap-safe Once the 32-bit seq wraps, a newer bm_seq can look smaller than old, so .. covert to wrap-safe calculate way. | ||||
| CVE-2026-98901 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix lease break and ack state handling Do not skip valid lease states containing WRITE_CACHING when breaking level-II/read leases for writes and truncates. Handle lease break acknowledgments according to the SMB2 rule that the acknowledged state must be a subset of the server's break target. Apply the acknowledged state directly and keep the break pending on failed ACKs. | ||||
| CVE-2026-98900 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xen/gntalloc: validate grant count before allocation gntalloc_ioctl_alloc() allocates the grant-id array before checking whether the requested count fits within the global grant limit. Counts above that limit cannot succeed, so reject them before the user-controlled allocation reaches kcalloc(). Use a subtraction-based check while holding gref_mutex so adding the requested count cannot wrap. Also cast the count before advancing the per-file index so the page-size multiplication is performed in 64-bit arithmetic. | ||||
| CVE-2026-98899 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: mark the rcu locked areas properly When we bump the uref counter, there's no need to keep the rcu lock because the referred hash table can't disappear. Also, from the same reason in mtype_gc we need the rcu lock and not a spinlock. | ||||
| CVE-2026-98898 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized When DPM is turned off with the amdgpu.dpm=0 module parameter, the thermal work queue isn't initialized so we shouldn't schedule any work on it. (cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2) | ||||
| CVE-2026-98897 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: don't hold ci->m_lock while waiting for a lease break ack When a cifs.ko client caches a read-handle (RH) lease via deferred close and a conflicting open arrives, ksmbd breaks the lease and waits for the acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s). __smb_break_all_levII_oplock() runs that wait while holding ci->m_lock for read. cifs.ko reacts to a handle-lease break by closing the deferred handle rather than sending a lease break acknowledgment. That close path (close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and is exactly what would wake the waiter, but it blocks on the read lock held by the waiting thread. The break is then resolved only by the 35s timeout, so xfstests generic/001 takes ~78s with leases enabled versus ~4s with oplocks only. Collect the target opinfos (each pinned with a reference) while holding ci->m_lock, then break them after releasing it, matching how smb_grant_oplock() already breaks a conflicting lease using only a reference. The reference keeps the opinfo (and its conn and lease) alive across the unlocked window, and a close racing the break is handled by the existing OPLOCK_CLOSING state check. Apply the same fix to the parent lease break paths. | ||||
| CVE-2026-98896 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep the domain reference while processing hotplug We process hotplug events in a workqueue that may run after the domain has been removed by tb_domain_remove(). For example if user unloads the driver while at the same time plugging a device router we may have scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by taking the domain reference before scheduling the hotplug handler in tb_queue_hotplug(). | ||||
| CVE-2026-98895 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Handle destroying table that has a miss table If a table has a miss table that was created by 'mlx5hws_table_set_default_miss' API function, its miss_tbl keeps the table that points to it in a list. If such table is deleted, we need to also remove it from the miss_tbl list, otherwise the node in miss_tbl list will contain garbage. | ||||
| CVE-2026-98894 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: reset CPER ring on corrupt entry size When CPER ring overflow handling advances the read pointer, it trusts the parsed entry size from the current ring contents. Corrupt CPER data can produce an entry size that does not advance rptr after dword conversion and pointer masking. In that case the recovery loop keeps testing the same location while holding the CPER ring mutex. This can hang the worker that is writing the next CPER record. Detect a no-progress rptr update and reset the CPER ring to an empty state instead. This drops the corrupt contents and lets the writer leave the recovery path without spinning. | ||||
| CVE-2026-98893 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate SENSOR_UPDATE payload size SENSOR_UPDATE carries one or more sensor readings after the fixed notification header. The parser derives the expected reading count from the sensor description, but it did not verify that the received payload contains those entries before parsing them. Reject truncated update notifications before reading the variable array. | ||||
| CVE-2026-98892 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size BASE_ERROR_EVENT carries a variable number of message reports, with the count encoded in error_status. The notification parser used that count without checking whether the received payload contained all reported entries. Reject truncated payloads before copying the report array. | ||||
| CVE-2026-98891 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate deauth frame length before reason access ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking that the fixed field is actually present in the received frame. Validate the deauth frame length first and only then read the reason code. | ||||
| CVE-2026-98890 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: reject short monitor TX frames In monitor mode, lbs_hard_start_xmit() casts skb->data to a radiotap TX header, skips that header, and then copies the 802.11 destination address from offset 4 in the remaining frame. The generic length check only rejects zero-length and oversized skbs, so a short monitor frame can be read past the end of the skb data. Require enough bytes for the radiotap TX header and the destination address field before using the monitor-mode header layout. | ||||
| CVE-2026-98889 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix sched scan IE sizing Scheduled scan built the probe request before iwl_mvm_scan_fits(), so oversized IEs could be copied into the fixed preq buffer before length validation. Move iwl_mvm_build_scan_probe() after the fits check. Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len() so userspace limits account for driver-inserted DS/TPC bytes. | ||||
| CVE-2026-98888 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: kprobes: Allow reentering kprobes while single-stepping A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This can happen when tracing or perf code runs from the debug exception path while the first kprobe is preparing or executing its out-of-line single-step instruction. Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable, the same as a hit in KPROBE_REENTER. This is too strict. A hit in KPROBE_HIT_SS is still a one-level reentry and can be handled by saving the current kprobe state and setting up single-step for the new probe, just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE. The truly unrecoverable case is hitting another kprobe while already in KPROBE_REENTER, because the reentry save area has already been consumed. Move KPROBE_HIT_SS to the recoverable reentry cases and leave KPROBE_REENTER as the unrecoverable nested reentry case. This change also requires saving saved_irqflag in struct prev_kprobe. When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites kcb->saved_irqflag with the currently masked DAIF value, losing the outer kprobe's original DAIF state. Without this fix, when the outer kprobe's single-step finishes, kprobes_restore_local_irqflag() applies the wrong DAIF mask and leaves interrupts permanently disabled. Extend struct prev_kprobe with a saved_irqflag field and save/restore it alongside kp and status. This ensures the outer kprobe's original interrupt state is preserved across reentry. This mirrors the x86 fix in commit 6a5022a56ac3 ("kprobes/x86: Allow to handle reentered kprobe on single-stepping"). | ||||