Export limit exceeded: 417482 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417482 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31677 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - limit RX SG extraction by receive buffer budget Make af_alg_get_rsgl() limit each RX scatterlist extraction to the remaining receive buffer budget. af_alg_get_rsgl() currently uses af_alg_readable() only as a gate before extracting data into the RX scatterlist. Limit each extraction to the remaining af_alg_rcvbuf(sk) budget so that receive-side accounting matches the amount of data attached to the request. If skcipher cannot obtain enough RX space for at least one chunk while more data remains to be processed, reject the recvmsg call instead of rounding the request length down to zero. | ||||
| CVE-2026-31675 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_netem: fix out-of-bounds access in packet corruption In netem_enqueue(), the packet corruption logic uses get_random_u32_below(skb_headlen(skb)) to select an index for modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0. Passing 0 to get_random_u32_below() takes the variable-ceil slow path which returns an unconstrained 32-bit random integer. Using this unconstrained value as an offset into skb->data results in an out-of-bounds memory access. Fix this by verifying skb_headlen(skb) is non-zero before attempting to corrupt the linear data area. Fully non-linear packets will silently bypass the corruption logic. | ||||
| CVE-2026-31663 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: hold dev ref until after transport_finish NF_HOOK After async crypto completes, xfrm_input_resume() calls dev_put() immediately on re-entry before the skb reaches transport_finish. The skb->dev pointer is then used inside NF_HOOK and its okfn, which can race with device teardown. Remove the dev_put from the async resumption entry and instead drop the reference after the NF_HOOK call in transport_finish, using a saved device pointer since NF_HOOK may consume the skb. This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip the okfn. For non-transport exits (decaps, gro, drop) and secondary async return points, release the reference inline when async is set. | ||||
| CVE-2026-31655 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled Keep the NOC_HDCP clock always enabled to fix the potential hang caused by the NoC ADB400 port power down handshake. | ||||
| CVE-2026-31606 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: don't call cdev_init while cdev in use When calling unbind, then bind again, cdev_init reinitialized the cdev, even though there may still be references to it. That's the case when the /dev/hidg* device is still opened. This obviously unsafe behavior like oopes. This fixes this by using cdev_alloc to put the cdev on the heap. That way, we can simply allocate a new one in hidg_bind. | ||||
| CVE-2026-31592 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock Take and hold kvm->lock for before checking sev_guest() in sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to a not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83 Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00 RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256 RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000 RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000 R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000 R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000 FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0 Call Trace: <TASK> kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371 kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363 __se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f34e9f7e9a9 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9 RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007 RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8 </TASK> with a syzlang reproducer that looks like: syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async) syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async) r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0) r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0) ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async) ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async) ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async) r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0) openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async) ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async) r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2) close(r0) (async) openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async) ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async) ioctl$KVM_RUN(r5, 0xae80, 0x0) Opportunistically use guard() to avoid having to define a new error label and goto usage. | ||||
| CVE-2026-31573 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: Fix kernel panic due to __initconst misuse Fix a kernel panic when probing the driver as a module: Unable to handle kernel paging request at virtual address ffffd9c18eb05000 of_find_matching_node_and_match+0x5c/0x1a0 hantro_probe+0x2f4/0x7d0 [hantro_vpu] The imx8mq_vpu_shared_resources array is referenced by variant structures through their shared_devices field. When built as a module, __initconst causes this data to be freed after module init, but it's later accessed during probe, causing a page fault. The imx8mq_vpu_shared_resources is referenced from non-init code, so keeping __initconst or __initconst_or_module here is wrong. Drop the __initconst annotation and let it live in the normal .rodata section. A bug of __initconst called from regular non-init probe code leading to bugs during probe deferrals or during unbind-bind cycles. | ||||
| CVE-2026-31560 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-dw-dma: fix print error log when wait finish transaction If an error occurs, the device may not have a current message. In this case, the system will crash. In this case, it's better to use dev from the struct ctlr (struct spi_controller*). | ||||
| CVE-2026-31557 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq. | ||||
| CVE-2026-31531 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for single nexthops and small Equal-Cost Multi-Path groups, this fixed allocation fails for large nexthop groups like 512 nexthops. This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: <TASK> rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Fix this by allocating the size dynamically using nh_nlmsg_size() and using nlmsg_new(), this is consistent with nexthop_notify() behavior. In addition, adjust nh_nlmsg_size_grp() so it calculates the size needed based on flags passed. While at it, also add the size of NHA_FDB for nexthop group size calculation as it was missing too. This cannot be reproduced via iproute2 as the group size is currently limited and the command fails as follows: addattr_l ERROR: message exceeded bound of 1048 | ||||
| CVE-2026-31505 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 | ||||
| CVE-2026-31502 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: team: fix header_ops type confusion with non-Ethernet ports Similar to commit 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()") team has the same class of header_ops type confusion. For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops directly. When the team device later calls dev_hard_header() or dev_parse_header(), these callbacks can run with the team net_device instead of the real lower device, so netdev_priv(dev) is interpreted as the wrong private type and can crash. The syzbot report shows a crash in bond_header_create(), but the root cause is in team: the topology is gre -> bond -> team, and team calls the inherited header_ops with its own net_device instead of the lower device, so bond_header_create() receives a team device and interprets netdev_priv() as bonding private data, causing a type confusion crash. Fix this by introducing team header_ops wrappers for create/parse, selecting a team port under RCU, and calling the lower device callbacks with port->dev, so each callback always sees the correct net_device context. Also pass the selected lower device to the lower parse callback, so recursion is bounded in stacked non-Ethernet topologies and parse callbacks always run with the correct device context. | ||||
| CVE-2026-31486 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) Protect regulator operations with mutex The regulator operations pmbus_regulator_get_voltage(), pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage() access PMBus registers and shared data but were not protected by the update_lock mutex. This could lead to race conditions. However, adding mutex protection directly to these functions causes a deadlock because pmbus_regulator_notify() (which calls regulator_notifier_call_chain()) is often called with the mutex already held (e.g., from pmbus_fault_handler()). If a regulator callback then calls one of the now-protected voltage functions, it will attempt to acquire the same mutex. Rework pmbus_regulator_notify() to utilize a worker function to send notifications outside of the mutex protection. Events are stored as atomics in a per-page bitmask and processed by the worker. Initialize the worker and its associated data during regulator registration, and ensure it is cancelled on device removal using devm_add_action_or_reset(). While at it, remove the unnecessary include of linux/of.h. | ||||
| CVE-2026-31462 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent immediate PASID reuse case PASID resue could cause interrupt issue when process immediately runs into hw state left by previous process exited with the same PASID, it's possible that page faults are still pending in the IH ring buffer when the process exits and frees up its PASID. To prevent the case, it uses idr cyclic allocator same as kernel pid's. (cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) | ||||
| CVE-2026-31432 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix OOB write in QUERY_INFO for compound requests When a compound request such as READ + QUERY_INFO(Security) is received, and the first command (READ) consumes most of the response buffer, ksmbd could write beyond the allocated buffer while building a security descriptor. The root cause was that smb2_get_info_sec() checked buffer space using ppntsd_size from xattr, while build_sec_desc() often synthesized a significantly larger descriptor from POSIX ACLs. This patch introduces smb_acl_sec_desc_scratch_len() to accurately compute the final descriptor size beforehand, performs proper buffer checking with smb2_calc_max_out_buf_len(), and uses exact-sized allocation + iov pinning. | ||||
| CVE-2026-31419 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== | ||||
| CVE-2026-31410 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION Use sb->s_uuid for a proper volume identifier as the primary choice. For filesystems that do not provide a UUID, fall back to stfs.f_fsid obtained from vfs_statfs(). | ||||
| CVE-2026-23472 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN uart_write_room() and uart_write() behave inconsistently when xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were never properly initialized): - uart_write_room() returns kfifo_avail() which can be > 0 - uart_write() checks xmit_buf and returns 0 if NULL This inconsistency causes an infinite loop in drivers that rely on tty_write_room() to determine if they can write: while (tty_write_room(tty) > 0) { written = tty->ops->write(...); // written is always 0, loop never exits } For example, caif_serial's handle_tx() enters an infinite loop when used with PORT_UNKNOWN serial ports, causing system hangs. Fix by making uart_write_room() also check xmit_buf and return 0 if it's NULL, consistent with uart_write(). Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 | ||||
| CVE-2026-23465 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: log new dentries when logging parent dir of a conflicting inode If we log the parent directory of a conflicting inode, we are not logging the new dentries of the directory, so when we finish we have the parent directory's inode marked as logged but we did not log its new dentries. As a consequence if the parent directory is explicitly fsynced later and it does not have any new changes since we logged it, the fsync is a no-op and after a power failure the new dentries are missing. Example scenario: $ mkdir foo $ sync $rmdir foo $ mkdir dir1 $ mkdir dir2 # A file with the same name and parent as the directory we just deleted # and was persisted in a past transaction. So the deleted directory's # inode is a conflicting inode of this new file's inode. $ touch foo $ ln foo dir2/link # The fsync on dir2 will log the parent directory (".") because the # conflicting inode (deleted directory) does not exists anymore, but it # it does not log its new dentries (dir1). $ xfs_io -c "fsync" dir2 # This fsync on the parent directory is no-op, since the previous fsync # logged it (but without logging its new dentries). $ xfs_io -c "fsync" . <power failure> # After log replay dir1 is missing. Fix this by ensuring we log new dir dentries whenever we log the parent directory of a no longer existing conflicting inode. A test case for fstests will follow soon. | ||||
| CVE-2026-23419 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: Fix circular locking dependency in rds_tcp_tune syzbot reported a circular locking dependency in rds_tcp_tune() where sk_net_refcnt_upgrade() is called while holding the socket lock: ====================================================== WARNING: possible circular locking dependency detected ====================================================== kworker/u10:8/15040 is trying to acquire lock: ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_cache_noprof+0x4b/0x6f0 but task is already holding lock: ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: rds_tcp_tune+0xd7/0x930 The issue occurs because sk_net_refcnt_upgrade() performs memory allocation (via get_net_track() -> ref_tracker_alloc()) while the socket lock is held, creating a circular dependency with fs_reclaim. Fix this by moving sk_net_refcnt_upgrade() outside the socket lock critical section. This is safe because the fields modified by the sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not accessed by any concurrent code path at this point. v2: - Corrected fixes tag - check patch line wrap nits - ai commentary nits | ||||