Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98914 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: cap ATOM command table nesting depth Cap nesting at 32 levels with execute_depth and return -ELOOP when exceeded. | ||||
| CVE-2026-98918 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of a contpte block, the sub-page offset puts end just past the block boundary, so the round-up lands a whole block further and the walk clears PTE_AF in CONT_PTES entries beyond the sampled block. For the last block in a page table page, those entries are past the end of that page, so the walk writes into the page that follows. Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2 c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the DAMON test. What the overrun does depends on the page that happens to follow the page table, so there is no single signature. If that page is read-only, the write faults in the sampling path itself: Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000 FSC = 0x0f: level 3 permission fault CM = 0, WnR = 1, TnD = 0, TagAccess = 0 CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2 pc : contpte_test_and_clear_young_ptes+0x70/0xc0 lr : damon_ptep_mkold+0x1e8/0x1f8 Call trace: contpte_test_and_clear_young_ptes+0x70/0xc0 (P) damon_mkold_pmd_entry+0x150/0x170 walk_pmd_range+0x110/0x2b0 walk_pud_range+0x10c/0x208 walk_pgd_range+0x134/0x258 __walk_page_range+0x98/0x1b0 walk_page_range_vma_unsafe+0x90/0x148 walk_page_range_vma+0x28/0x40 damon_va_walk_page_range+0x114/0x2b8 damon_va_prepare_access_checks+0xec/0x1a8 kdamond_fn+0x534/0x770 kthread+0x128/0x138 ret_from_fork+0x10/0x20 Otherwise the page is writable, the PTE_AF clearing succeeds silently and the damage only surfaces later, in whatever happened to own the page, so the backtrace is unrelated to DAMON and differs between runs. Pass a page-aligned address to the ptep_test_and_clear_young() call in damon_ptep_mkold(), which is the only place DAMON can reach contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned address, and r->sampling_addr itself is left as is, so the sampling and region bookkeeping semantics are unchanged. | ||||
| CVE-2026-98928 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve() tests the bit while vcpu_has_sve() reads the flag. A host that sets the flag without the bit gets a vCPU with a NULL sve_state that the world switch loads the guest's SVE state from. Derive the flag from the bit, and drop the protected path's copy of the host's flag, which is dead code since protected VMs are not allowed SVE. | ||||
| CVE-2026-98982 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't let a pseudo dentry become the root of a mount d_alloc_pseudo() hands out dentries for pipes, sockets and other files that are never anyone's child or parent. They carry DCACHE_NORCU and dentry_free() frees them right away because no lockless path walk can ever reach them. That holds as long as such a dentry isn't the root of a mount. But bind mounting /proc/self/fd/<fd> of such a file does exactly that. Most callers of alloc_file_pseudo() put their files on kernel-internal mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It places the token file on the bpffs mount the caller handed it and that mount is in the caller's mount namespace so the clone goes through: mount --bind /proc/self/fd/<token> <file> open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount() __follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq and d_flags of the dentry and only then checks mount_lock. The dentry can be gone by then. The final mntput() of an unmounted parent unhooks a child that stayed attached to it under mount_lock alone. When the child's holder does the final put right after that the root is dput() and freed immediately while a walker that found the mount hashed still looks at it. Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing sensible can be done with a bind mount of a bpf token anyway. | ||||
| CVE-2026-98987 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: namespace: look at the topmost mount for a mount namespace file attach_recursive_mnt() preallocates a mountpoint for the root of the topmost mount of the source so that a mount that already sits at the destination can be put on top of the source or on top of one of its propagated copies. The copies are made without CL_COPY_MNT_NS_FILE so their chain of overmounts is shorter than the source's. It ends below the first bind mount of a mount namespace file. So while the loop walks up the chain of the source it remembers the mountpoint of that mount in "shorter" and the existing mount is put there for the copies. But the loop ends at the topmost mount without ever looking at it. If the topmost mount is the only mount namespace file in the chain "shorter" stays NULL and mnt_change_mountpoint() attaches the existing mount of the copy below the root of the mount namespace file. That's a dentry of nsfs. No path walk in the copy's mount namespace ever gets there. The mount is gone until its parent goes and the copy that took its place can't be unmounted synchronously because it has a child: S bind mount of a file N bind mount of a mount namespace file on top of S A shared mount, B a slave of A, Q mounted on B/file move_mount(S, A/file) cat B/file -> the content of S instead of Q umount B/file -> EBUSY Look at every mount of the chain including the topmost one. | ||||
| CVE-2026-42057 | 1 Vtk | 1 Vtk | 2026-10-29 | 7.5 High |
| An invalid pointer dereference vulnerability exists in the vtkPNGReader::vtkPNGReaderUpdate2 functionality of vtk 9.6. A specially crafted .png file can lead to a denial of service. An attacker can provide a malicious file to trigger this vulnerability. | ||||
| CVE-2026-118776 | 1 Digitalbazaar | 1 Forge | 2026-10-29 | 3.7 Low |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used decipher.finish(), CBC and ECB modes, PKCS#7 padding to process the relevant input or security decision. node-forge validated only the final byte of PKCS#7 padding during CBC and ECB decryption and accepted zero, oversized, or mismatched padding bytes. Malformed ciphertext could consequently be accepted and up to four plaintext blocks could be silently removed, causing an integrity failure in applications that treated successful decryption as proof of valid padding. This issue is fixed in version 1.4.1. | ||||
| CVE-2026-118777 | 1 Digitalbazaar | 1 Forge | 2026-10-29 | 4.8 Medium |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the forge.http client stored cookie names and paths from Set-Cookie response headers in ordinary JavaScript objects. A malicious server could use the cookie name __proto__ so that the attacker-controlled cookie path was written as a property on Object.prototype, or use inherited names such as constructor to modify Object. An empty cookie value could use the removal path to delete an inherited Object.prototype property. Applications using forge.http directly or through forge.xhr are affected; applications that do not use forge.http are unaffected. This issue is fixed in version 1.4.1. | ||||
| CVE-2026-118780 | 1 Digitalbazaar | 1 Forge | 2026-10-29 | 3.7 Low |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used pki.verifyCertificateChain(), pki.createCaStore(), duplicate subject names to process the relevant input or security decision. node-forge modified the CA store while trying certificates that shared a subject name during pki.verifyCertificateChain(). A failed chain verification could permanently remove trusted CA certificates from the store, causing later valid chains to fail and creating a persistent availability impact for applications that reused the store. This issue is fixed in version 1.4.1. | ||||
| CVE-2026-118781 | 1 Digitalbazaar | 1 Forge | 2026-10-29 | 2.9 Low |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used BigInteger.prototype.modInverse(), bnModInverse(), lib/jsbn.js, RSA public exponent e to process the relevant input or security decision. node-forge's bundled jsbn implementation entered an infinite loop when BigInteger.prototype.modInverse() received a negative value or modulus. An attacker who could control the RSA public exponent passed to key generation, or a direct modInverse() operand, could block the Node.js event loop at full CPU. Parsed DER, PEM, JWK, PKCS#12, X.509, and TLS values are unsigned and cannot trigger this issue. This issue is fixed in version 1.4.1. | ||||
| CVE-2026-118782 | 1 Digitalbazaar | 1 Forge | 2026-10-29 | 7.5 High |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge accepted a PKCS#12 MAC or PKCS#12 password-based encryption iteration count of zero or less. pki.pbe.generatePkcs12Key() then returned a constant key independent of the password and salt, allowing crafted PKCS#12 input processed by forge.pkcs12.pkcs12FromAsn1() to bypass password-based integrity checks. Predictable encryption keys and IVs also affected PKCS#12 PBE using pbeWithSHAAnd3-KeyTripleDES-CBC or pbewithSHAAnd40BitRC2-CBC, including shrouded key bags, encrypted SafeContents, and PKCS#8 ENCRYPTED PRIVATE KEY input processed independently by forge.pki.decryptPrivateKeyInfo(). PBES2/PBKDF2-encrypted content is unaffected. This issue is fixed in version 1.4.1. | ||||
| CVE-2026-119191 | 1 Digitalbazaar | 1 Forge | 2026-10-29 | 7.5 High |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used asn1.fromDer(), BIT STRING decoding, maxDepth to process the relevant input or security decision. node-forge decoded ASN.1 stored inside BIT STRING values without consistently applying the configured maxDepth limit and recursively retained copies at each nesting level. Crafted DER containing nested BIT STRINGs could cause excessive recursion, CPU use, and quadratic memory consumption during asn1.fromDer(). This issue is fixed in version 1.4.1. | ||||
| CVE-2026-119193 | 1 Sebastianbergmann | 1 Phpunit | 2026-10-29 | N/A |
| PHPUnit is a testing framework for PHP. From 13.4.0 until 13.4.4, the TestCase::coverageFilesDirectory() logic in src/Runner/Phpt/TestCase.php creates temporary files for PHPT code coverage in a predictable phpunit-phpt directory under sys_get_temp_dir() and reuses that directory without verifying its ownership or permissions. On multi-user systems with a shared temporary path, a local attacker who creates the directory before the developer runs PHPT tests with code coverage can replace the generated job file before the child process executes it with require, allowing arbitrary code execution with the developer's privileges while the test and coverage report appear successful. PHPUnit 12.5 and earlier, default macOS and Windows configurations with per-user temporary directories, and single-user environments where another user cannot create files in the temporary path are not affected. This issue is fixed in 13.4.4. | ||||
| CVE-2026-110074 | 1 Adobe | 2 Adobe Experience Manager, Experience Manager | 2026-10-29 | 5.4 Medium |
| Adobe Experience Manager is affected by a DOM-based Cross-Site Scripting (XSS) vulnerability. An attacker could exploit this issue by manipulating the DOM environment to execute malicious JavaScript within the context of the victim's browser. Exploitation of this issue requires user interaction in that a victim must visit a crafted webpage. Scope is changed. | ||||
| CVE-2026-90932 | 1 Laradashboard | 1 Lara Dashboard | 2026-10-29 | 7.2 High |
| LaraDashboard versions 0.9.2 through 1.2.2 contain a path traversal vulnerability in the core-upgrade backup handling. CoreUpgradeController and BackupService (e.g. BackupService::deleteBackup()) concatenate the user-supplied backup_file/filename value directly onto the backup directory path without normalisation, without applying basename(), and without verifying that the resolved path remains inside storage/app/core-backups; the corresponding form requests only validate the value as a bounded string. An authenticated user holding only the delegated settings.edit permission (not Superadmin) can supply ../ traversal sequences to delete arbitrary files reachable on the host filesystem, including outside the application tree, or to restore a ZIP archive from an arbitrary on-disk location, writing arbitrary files into the application directories and achieving remote code execution. Note: the advisory states the vulnerable concatenation was introduced in the v0.9.7 release line. Fixed in 1.3.0. | ||||
| CVE-2026-84807 | 1 Kimai | 1 Kimai | 2026-10-29 | 5.4 Medium |
| Kimai (kimai/kimai) before 2.65.0 contains a business logic / improper authorization vulnerability in the default team creation endpoints. An authenticated user with project permission-management privileges can create or use a customer, project, or activity whose name matches an existing team; because the endpoints POST /api/customers/{id}/team, POST /api/projects/{id}/team, and POST /api/activities/{id}/team reuse an existing team of the same name and add the current user as teamlead without verifying that the user is authorized to manage that team, the attacker gains unauthorized team-lead (administration) rights over the existing team. Fixed in 2.65.0. | ||||
| CVE-2026-82854 | 1 Nodemailer | 1 Nodemailer | 2026-10-29 | 9.8 Critical |
| Nodemailer before 8.0.4 is vulnerable to SMTP command injection through the unsanitized envelope.size parameter. When an application passes a custom envelope object with a size property containing CRLF characters to sendMail(), the value is concatenated into the SMTP MAIL FROM command (as SIZE=...) without sanitization, allowing injection of arbitrary SMTP commands such as RCPT TO to silently add attacker-controlled recipients. Exploitation requires the application to expose the envelope size to attacker-controlled input, as Nodemailer does not include size in the default auto-constructed envelope. | ||||
| CVE-2026-81694 | 1 Jahlives | 1 Openssl Encrypt | 2026-10-29 | 3.3 Low |
| openssl-encrypt (pip package, versions <= 1.4.8) fails to sanitize filenames read from untrusted drive data (outside the AES-GCM authenticated manifest) before printing them in the verify-usb command's output. An attacker can plant filenames containing terminal cursor-movement and erase-line control bytes that repaint a forged PASSED verdict on screen, masking actual tamper detection. Fixed in 1.4.9 by routing drive-derived names through sanitize_for_display(). | ||||
| CVE-2026-75913 | 1 Hmbown | 1 Codewhale | 2026-10-29 | 9.3 Critical |
| CodeWhale versions >= 0.3.27 and < 0.8.64 (published as deepseek-tui >= 0.3.27 and < 0.8.41 on npm and 0.3.27 through 0.8.41 on crates.io, and as codewhale / codewhale-tui >= 0.8.41 and < 0.8.64) contain an argument injection vulnerability in the git_show tool. The model-supplied rev parameter is passed unvalidated into the git show argv without an --end-of-options sentinel, so a value beginning with --output= is interpreted as a git flag. Because the tool is registered as auto-approved and advertised as read-only, an attacker (via a malicious repository combined with prompt injection) can cause an unprompted arbitrary file write at the privilege of the invoking user, targeting sensitive files such as ~/.ssh/authorized_keys, ~/.bashrc, or ~/.gitconfig. Fixed in codewhale / codewhale-tui 0.8.64 by adding rev validation; the deprecated deepseek-tui crate has no fixed release. | ||||
| CVE-2026-75857 | 1 Hmbown | 1 Codewhale | 2026-10-29 | 7 High |
| CodeWhale versions >= 0.3.10 and < 0.8.64 (published as deepseek-tui >= 0.3.10 and < 0.8.41 on npm and 0.3.10 through 0.8.41 on crates.io, and as codewhale / codewhale-tui >= 0.8.41 and < 0.8.64) contain a vulnerability in the exec_shell_interact (alias exec_interact) tool, whose approval_requirement returns ApprovalRequirement::Auto. This overrides the default Required approval for code-executing tools, so LLM-controlled stdin is written into an already-approved long-running interactive shell (e.g., a python3 -i REPL, mysql, ssh, or sudo -i session) without any approval prompt. An attacker who can inject instructions via untrusted content the agent ingests (a fetched page, MCP result, or repo file) can cause commands to run at the privilege level of that approved process. Fixed in codewhale / codewhale-tui 0.8.64; the deprecated deepseek-tui crate has no fixed release. | ||||