Export limit exceeded: 15534 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15534 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72261 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Validate size in snd_sof_update_control In snd_sof_update_control(), firmware-provided cdata->num_elems is checked against local_cdata->data->size but never against the actual allocation size. If local_cdata->data->size was previously set to an inconsistent value, the memcpy could write past the allocated buffer. Add a bounds check to ensure num_elems fits within the available space in the ipc_control_data allocation before copying. | ||||
| CVE-2026-72029 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up. | ||||
| CVE-2026-98419 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al is computed as: al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); skb = genlmsg_new(al, GFP_KERNEL); ... nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); ... msg = nla_data(nla); memset(msg, 0, al); Because al includes sizeof(struct nlattr) (the 4-byte attribute header), genlmsg_new() allocates al bytes of tailroom starting at nla. However, msg points to nla_data(nla), which is located sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al) therefore writes al bytes starting from msg, exceeding the allocated buffer by sizeof(struct nlattr) (4 bytes) and corrupting skb_shared_info. Fix this by letting al represent only the payload length, allocating the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing al bytes from msg. | ||||
| CVE-2025-38439 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] | ||||
| CVE-2026-109753 | 1 Mozilla | 1 Firefox | 2026-10-15 | 8.1 High |
| Incorrect boundary conditions in the Layout component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-109708 | 1 Mozilla | 1 Firefox | 2026-10-15 | 9.6 Critical |
| Sandbox escape due to incorrect boundary conditions in the Networking component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-110958 | 1 Wavlink | 1 Wn530hg4b | 2026-10-15 | 10 Critical |
| A vulnerability was found in Wavlink WN530HG4B M30HG4B_V260724. The impacted element is an unknown function of the file api.cgi. The manipulation results in heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026-09-24-841a51c6d5_tclinux.bin is sufficient to resolve this issue. The affected component should be upgraded. The vendor confirms: "We confirm the finding, and it has already been addressed. In the current firmware the api=info&client=app handler no longer builds a shell command: the login script is now invoked through an argument vector (execvp) instead of system(), and the client address is length-limited and null-checked." | ||||
| CVE-2018-19517 | 1 Sysstat Project | 1 Sysstat | 2026-10-15 | N/A |
| An issue was discovered in sysstat 12.1.1. The remap_struct function in sa_common.c has an out-of-bounds read during a memset call, as demonstrated by sadf. | ||||
| CVE-2018-12214 | 1 Intel | 1 Graphics Driver | 2026-10-15 | N/A |
| Potential memory corruption in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables a privileged user to execute arbitrary code via local access. | ||||
| CVE-2018-12213 | 1 Intel | 1 Graphics Driver | 2026-10-15 | N/A |
| Potential memory corruption in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables an unprivileged user to cause a denial of service via local access. | ||||
| CVE-2018-12212 | 1 Intel | 1 Graphics Driver | 2026-10-15 | N/A |
| Buffer overflow in User Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables an unprivileged user to cause a denial of service via local access. | ||||
| CVE-2018-12210 | 2 Intel, Microsoft | 2 Graphics Driver, Windows | 2026-10-15 | N/A |
| Multiple pointer dereferences in User Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables an unprivileged user to cause a denial of service via local access. | ||||
| CVE-2018-12115 | 2 Nodejs, Redhat | 5 Node.js, Openshift, Openshift Application Runtimes and 2 more | 2026-10-15 | N/A |
| In all versions of Node.js prior to 6.14.4, 8.11.4 and 10.9.0 when used with UCS-2 encoding (recognized by Node.js under the names `'ucs2'`, `'ucs-2'`, `'utf16le'` and `'utf-16le'`), `Buffer#write()` can be abused to write outside of the bounds of a single `Buffer`. Writes that start from the second-to-last position of a buffer cause a miscalculation of the maximum length of the input bytes to be written. | ||||
| CVE-2026-84875 | 1 Ibm | 1 Guardium Data Protection | 2026-10-15 | 7.5 High |
| IBM Guardium Data Protection 12.0, 12.1, and 12.2 could allow a remote attacker to execute arbitrary code due to a buffer overflow. | ||||
| CVE-2026-110810 | 1 Ggml-org | 1 Whisper.cpp | 2026-10-15 | 2.8 Low |
| A vulnerability was detected in ggml-org whisper.cpp up to 1.9.4. This affects the function whisper_model_load of the file src/whisper.cpp of the component Model Loader. Performing a manipulation of the argument ttype results in out-of-bounds read. The attack must be initiated from a local position. The exploit is now public and may be used. Upgrading to version 1.9.5 is able to mitigate this issue. The patch is named 60c0be6ac8fa71b1a2ae2dd938a31a34a508e774. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-110695 | 1 Turboderp | 1 Exllamav2 | 2026-10-15 | 6.3 Medium |
| A vulnerability was detected in turboderp ExLlamaV2 up to 0.3.2. Affected is the function STFile.get_tensor of the file exllamav2/stloader.py of the component Safetensors Tensor Loader. Performing a manipulation of the argument data_offsets results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-110679 | 1 Opensips | 1 Opensips | 2026-10-15 | 7.3 High |
| A vulnerability was determined in OpenSIPS up to 3.6.8/4.0.1. The impacted element is the function rtpproxy_offer/rtpproxy_answer of the component rtpproxy. This manipulation causes out-of-bounds read. The attack may be initiated remotely. Upgrading to version 3.6.9 and 4.0.2 is sufficient to resolve this issue. It is advisable to upgrade the affected component. | ||||
| CVE-2026-109827 | 1 Gpac | 1 Gpac | 2026-10-15 | 6.3 Medium |
| A vulnerability has been found in GPAC up to 26.07.0. This vulnerability affects the function gf_m2ts_decode_ait of the file src/media_tools/ait.c of the component AIT Parser. Such manipulation leads to out-of-bounds write. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 6d2c21a1a688abb20d0111b608db3b6f44d348f4. Applying a patch is advised to resolve this issue. | ||||
| CVE-2026-108955 | 1 Tiiny-ai | 1 Powerinfer | 2026-10-15 | 5.3 Medium |
| A vulnerability was determined in Tiiny-AI PowerInfer up to 8bd56d69906c9d2dba4d3bf6899763401e01a9a4. Impacted is the function gguf_init_from_file of the file ggml.c of the component GGUF Parser. This manipulation of the argument data_offset causes out-of-bounds read. The attack requires local access. The exploit has been publicly disclosed and may be utilized. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-108892 | 1 Linksys | 2 E1700, E1700 Firmware | 2026-10-15 | 10 Critical |
| A vulnerability was determined in Linksys E1700 1.0.0.4.003. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter of the component Mac Filter. This manipulation of the argument newap_text_%d causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||