Export limit exceeded: 28420 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28420 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80745 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: fp9931: Fix VPOS/VNEG voltage selector table The VPOSNEG_table[] mapping does not match the FP9931 datasheet. The datasheet defines the VPOS/VNEG voltage mapping as: 00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) However, VPOSNEG_table[] has two issues: 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access. Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F). | ||||
| CVE-2026-84484 | 1 Nasajpl | 1 Iondtn | 2026-09-04 | 7.5 High |
| ION-DTN versions before 4.2.0 contain an out-of-bounds read vulnerability in the decodeSdnv function that allows unauthenticated remote attackers to read memory by sending truncated SDNV values. Attackers can send a UDP datagram to the LTP link service input port with a truncated SDNV to trigger reads up to nine bytes past buffer boundaries and underflow byte counters. | ||||
| CVE-2026-84269 | 1 Redhat | 1 Enterprise Linux | 2026-09-04 | 6.5 Medium |
| A flaw was found in the AFP backend in gvfs. When mounting a share, a malicious AFP server can cause the DSI read path to process a length that exceeds the size requested by the client. The function does not verify the server-provided length against the pre-sized reply buffer, causing the operation to access past the intended boundaries. This issue allows a malicious server to overflow a heap buffer and crash the gvfsd-afp process, resulting in a denial of service. | ||||
| CVE-2026-85218 | 1 Bluez | 1 Bluez | 2026-09-04 | 7.1 High |
| A double stack-based buffer overflow was found in the BlueZ AVRCP controller implementation. A nearby BR/EDR peripheral can send a crafted AVRCP player-settings response that supplies an attacker-controlled attribute count, causing avrcp_list_player_attributes_rsp() and avrcp_get_current_player_value() in profiles/audio/avrcp.c to write attacker-controlled data past fixed-size stack buffers, potentially leading to a crash or code execution in the bluetoothd daemon. | ||||
| CVE-2026-85393 | 1 Digitalbazaar | 1 Forge | 2026-09-03 | 7.5 High |
| node-forge through 1.4.0 fails to validate element count in nested DigestAlgorithm sequences during RSA PKCS#1 v1.5 signature verification. Attackers can embed garbage bytes inside the DigestAlgorithm sequence to forge valid signatures for arbitrary messages using low-exponent RSA keys. This is an incomplete fix for CVE-2026-33894. | ||||
| CVE-2026-15431 | 2 Hp, Hp Inc. | 2 Support Assistant, Hp Support Assistant | 2026-09-03 | N/A |
| A potential security vulnerability has been identified in the HP Support Assistant for versions prior to 9.53.2.0. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls. | ||||
| CVE-2026-84640 | 1 Mozilla | 1 Thunderbird | 2026-09-03 | 7.5 High |
| A maliciously constructed mail header could lead to a one byte read past the end of a buffer. This vulnerability was fixed in Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. | ||||
| CVE-2026-84351 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-09-03 | 8.3 High |
| Buffer overflow in GPU in Google Chrome on on Windows prior to 152.0.7977.75 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-51934 | 1 Tenda | 1 A18 | 2026-09-03 | 9.8 Critical |
| Buffer Overflow vulnerability in Shenzhen Jixiang Tengda Technology Co., Ltd. Tenda A18 v.15.13.07.09 allows a remote attacker to execute arbitrary code via the fromSetCmdlineRun function | ||||
| CVE-2026-12661 | 2 Rockwell Automation, Rockwellautomation | 2 Factorytalk Historian Machine Edition, Factorytalk Historian Machine Edition | 2026-09-03 | N/A |
| A denial-of-service security issue exists within FactoryTalk® Historian Machine Edition. A network adjacent attacker who is authenticated could send crafted requests to the web interface, resulting in buffer overflow conditions that may cause the device to crash and become unresponsive. | ||||
| CVE-2025-9189 | 3 Digilent, Measx, Ni | 3 Dasylab, Dasylab, Dasylab | 2026-09-03 | 7.8 High |
| There is an out of bounds write vulnerability due to improper bounds checking resulting in a large destination address when parsing a DSB file with Digilent DASYLab. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted DSB file. The vulnerability affects all versions of DASYLab. | ||||
| CVE-2026-64087 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) reject implausible blackbox record_count adm1266_nvmem_read_blackbox() loops over a record_count that comes straight from byte 3 of the BLACKBOX_INFO response. The destination buffer is data->dev_mem, sized for the nvmem cell's declared 2048 bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64). A device that reports a record_count greater than 32 -- whether due to firmware bugs, bus corruption, or a non-responsive slave returning 0xff -- would walk read_buff past the end of the dev_mem allocation on the trailing iterations. Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here) before entering the loop and return -EIO on any larger value, so a malformed BLACKBOX_INFO response cannot drive the loop out of bounds. | ||||
| CVE-2026-64347 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. | ||||
| CVE-2026-64351 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration. | ||||
| CVE-2026-64339 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing adjacent slab memory; with KASAN this is reported as a slab-out-of-bounds read. The number of bytes actually received is already known: act equals the URB actual_length and is bounded by rxbuf_len. Reject any response that claims more payload than was received, mirroring the existing "act < sizeof(*bpkt)" check just above. The control path (usbio_ctrl_msg()) is not affected: it uses a single buffer (ctrlbuf) for both directions, so its analogous copy can never leave the allocation. Found by code review. The out-of-bounds read was confirmed under AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is also available. | ||||
| CVE-2026-64318 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64066 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails. | ||||
| CVE-2026-53600 | 1 Dignifiedquire | 1 Async-tar | 2026-09-03 | 5.3 Medium |
| async-tar is a tar archive reading/writing library for async Rust. Prior to version 0.6.1, async-tar mis-applies a buffered PAX size extension to an intermediary extension header (a GNU longname L, a GNU longlink K, or a PAX x/g header) instead of to the next file entry. POSIX requires a PAX extended-header record set to describe the next file entry, never an intervening extension header. Because poll_next_raw (src/archive.rs) threads the buffered PAX records into the size computation of whatever raw header it reads next — and that header can be an intermediary L — the stream cursor is advanced by an attacker-chosen amount when the L body is consumed. The parser then desyncs relative to a POSIX-correct tar parser (e.g. GNU tar), reading subsequent bytes at the wrong block boundary. This issue has been patched in version 0.6.1. | ||||
| CVE-2026-85084 | 1 Samsung Open Source | 1 Tizenfx | 2026-09-03 | 6.3 Medium |
| Out-of-bounds Write and Improper Validation of Array Index vulnerability in Samsung Open Source TizenFX Samsung/TizenFX allows Overflow Buffers. | ||||