Export limit exceeded: 417325 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417325 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53272 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix use-after-free on sbi->sync_decompress z_erofs_decompress_kickoff() can race with filesystem unmount, causing a use-after-free on sbi->sync_decompress. When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff() to queue z_erofs_decompressqueue_work() asynchronously. Then, after all folios are unlocked, unmount workflow can proceed and sbi will be freed before accessing to sbi->sync_decompress. Thread (unmount) I/O completion kworker queue_work z_erofs_decompressqueue_work (all folios are unlocked) cleanup_mnt .. erofs_kill_sb erofs_sb_free kfree(sbi) access sbi->sync_decompress // UAF!! | ||||
| CVE-2026-53267 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c | ||||
| CVE-2026-53262 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl() pppol2tp_ioctl() read sock->sk->sk_user_data directly without any locks or reference counting. If a controllable sleep was induced during copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent socket close could trigger pppol2tp_session_close() asynchronously. This frees the l2tp_session structure via the l2tp_session_del_work workqueue. Upon resuming, the ioctl thread dereferences the stale session pointer, resulting in a Use-After-Free (UAF). Fix this by securely fetching the session reference using the RCU-safe, refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the session's refcount across the sleep. We structured the function to exit via standard err breaks, guaranteeing that l2tp_session_put() is cleanly called on all return paths to drop the reference. To preserve existing behavior we validate the session and its magic signature only for the specific L2TP commands that require it. This ensures that generic/unknown ioctls called on an unconnected socket still return -ENOIOCTLCMD and correctly fall back to generic handlers (e.g. in sock_do_ioctl()). | ||||
| CVE-2026-53258 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: fix leak if split 6 GHz scanning fails rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's supposed to be released at ___cfg80211_scan_done() but this doesn't happen as rdev->scan_req is NULL at that point, too, leading to the early return from the freeing function. unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0 Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2026-53237 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix NULL pointer dereference in suspend/resume mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. | ||||
| CVE-2026-53232 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: clean the sfp upstream if phy probing fails Sashiko reported that we don't call sfp_bus_del_upstream() in the probe failure path, so let's add it, otherwise the sfp-bus is left with a dangling 'upstream' field, that may be used later on during SFP events. This issue existed before the generic phylib sfp support, back when drivers were calling phy_sfp_probe themselves. | ||||
| CVE-2026-53230 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max. | ||||
| CVE-2026-53229 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed. | ||||
| CVE-2026-53224 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded INIT chunk and address list lengths in cookie sctp_unpack_cookie() only checked that the embedded INIT chunk length did not exceed the remaining cookie payload, but did not ensure that the INIT chunk is large enough to contain a complete INIT header. A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose length field is smaller than sizeof(struct sctp_init_chunk). Later, sctp_process_init() accesses INIT parameters unconditionally, which may lead to out-of-bounds reads. In addition, raw_addr_list_len is not fully validated against the remaining cookie payload. When cookie authentication is disabled, an attacker can supply an oversized raw_addr_list_len and cause sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The address parser also lacks sufficient bounds checks for parameter headers and lengths, allowing malformed address parameters to trigger out-of-bounds reads. Fix this by: - requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk); - validating that the INIT chunk and raw address list together fit within the cookie payload; - verifying sufficient data exists for each address parameter header and payload before parsing it. Note that sctp_verify_init() must be called after sctp_unpack_cookie() and before sctp_process_init() when cookie authentication is disabled. This will be addressed in a separate patch. | ||||
| CVE-2026-53220 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: revalidate bridge ports ebt_redirect_tg() dereferences br_port_get_rcu() return without a NULL check, causing a kernel panic when the bridge port has been removed between the original hook invocation and an NFQUEUE reinject. A mere NULL check isn't sufficient, however. As sashiko review points out userspace can not only remove the port from the bridge, it could also place the device in a different virtual device, e.g. macvlan. If this happens, we must drop the packet, there is no way for us to reinject it into the bridge path. Switch to _upper API, we don't need the bridge port structure. Also, this fix keeps another bug intact: Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER too aggressive, which prevents certain logging features when queueing in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old CONFIG_BRIDGE_NETFILTER cruft is off. Fixes tag is a common ancestor, this was always broken. | ||||
| CVE-2026-53129 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down. | ||||
| CVE-2026-53122 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between reflink and transaction commit when using flushoncommit When using the flushoncommit mount option, we can have a deadlock between a transaction commit and a reflink operation that copied an inline extent to an offset beyond the current i_size of the destination node. The deadlock happens like this: 1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page(); 2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc; 3) The delalloc flushing sees the new dirty folio of inode Y and when it attempts to flush it, it ends up at extent_writepage() and sees that the offset of the folio is beyond the i_size of inode Y, so it attempts to invalidate the folio by calling folio_invalidate(), which ends up at btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it tries to lock the folio's range in inode Y's extent io tree, but it blocks since it's currently locked by task A - during a reflink we lock the inodes and the source and destination ranges after flushing all delalloc and waiting for ordered extent completion - after that we don't expect to have dirty folios in the ranges, the exception is if we have to copy an inline extent's data (because the destination offset is not zero); 4) Task A then attempts to start a transaction to update the inode item, and then it's blocked since the current transaction is in the TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the current transaction to become unblocked (its state >= TRANS_STATE_UNBLOCKED). So task A is waiting for the transaction commit done by task B, and the later waiting on the extent lock of inode Y that is currently held by task A. Syzbot recently reported this with the following stack traces: INFO: task kworker/u8:7:1053 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-46) Call Trace: <TASK> context_switch kernel/sched/core.c:5298 [inline] __schedule+0x1553/0x5240 kernel/sched/core.c:6911 __schedule_loop kernel/sched/core.c:6993 [inline] schedule+0x164/0x360 kernel/sched/core.c:7008 wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704 extent_writepage fs/btrfs/extent_io.c:1852 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline] btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713 do_writepages+0x32e/0x550 mm/page-writeback.c:2554 __writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750 writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042 wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227 wb_do_writeback fs/fs-writeback.c:2374 [inline] wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414 process_one_work kernel/workqueue.c:3276 [inline] process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.4.64:6910 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.64 state:D stack:22752 pid:6910 tgid: ---truncated--- | ||||
| CVE-2026-53108 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unmap race with PMD migration entries The following race is possible with migration swap entries or device-private THP entries. e.g. when move_pages is called on a PMD THP page, then there maybe an intermediate state, where PMD entry acts as a migration swap entry (pmd_present() is true). Then if an munmap happens at the same time, then this VM_BUG_ON() can happen in pmdp_huge_get_and_clear_full(). This patch fixes that. Thread A: move_pages() syscall add_folio_for_migration() mmap_read_lock(mm) folio_isolate_lru(folio) mmap_read_unlock(mm) do_move_pages_to_node() migrate_pages() try_to_migrate_one() spin_lock(ptl) set_pmd_migration_entry() pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn set_pmd_at() # PMD: migration swap entry (pmd_present=0) spin_unlock(ptl) [page copy phase] # <--- RACE WINDOW --> Thread B: munmap() mmap_write_downgrade(mm) unmap_vmas() -> zap_pmd_range() zap_huge_pmd() __pmd_trans_huge_lock() pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry) pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl pmdp_huge_get_and_clear_full() VM_BUG_ON(!pmd_present(*pmdp)) # HITS! [ 287.738700][ T1867] ------------[ cut here ]------------ [ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187! cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0] pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c lr: c000000000645dec: zap_huge_pmd+0xb0/0x868 sp: c00000044037f790 msr: 800000000282b033 current = 0xc0000004032c1a00 paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09 pid = 1867, comm = a.out kernel BUG at :187! Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026 enter ? for help [link register ] c000000000645dec zap_huge_pmd+0xb0/0x868 [c00000044037f790] c00000044037f7d0 (unreliable) [c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868 [c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40 [c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8 [c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128 [c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310 [c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238 [c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8 [c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40 [c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350 [c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec ---- Exception: 3000 (System Call Vectored) at 0000000010064a2c SP (7fff9b1ee9c0) is in userspace 0:mon> zh commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"), enabled migration for device-private PMD entries. Hence this is one other path where this warning could get trigger from. ------------[ cut here ]------------ WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905 Modules linked in: test_hmm CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284 LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4 Call Trace: [c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable) [c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498 [c000000604707760] [c00000000063e5a4] migrate_vma_col ---truncated--- | ||||
| CVE-2026-53102 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req() mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to be freed eventually by mt76_mcu_skb_send_msg(). However, currently if an intermediate function fails before sending, the allocated skb is leaked. Specifically, mt76_connac_mcu_sta_wed_update() and mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory leak in the error path. Fix this by explicitly freeing the skb in these error paths. Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error") made a similar change. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-53083 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix RCU stall in bpf_fd_array_map_clear() Add a missing cond_resched() in bpf_fd_array_map_clear() loop. For PROG_ARRAY maps with many entries this loop calls prog_array_map_poke_run() per entry which can be expensive, and without yielding this can cause RCU stalls under load: rcu: Stack dump where RCU GP kthread last ran: CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef) Workqueue: events prog_array_map_clear_deferred RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246 Call Trace: <TASK> prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096 __fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925 bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline] prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141 process_one_work+0x898/0x19d0 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x770/0x10b0 kernel/workqueue.c:3400 kthread+0x465/0x880 kernel/kthread.c:464 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-53076 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix OOB in pcpu_init_value An out-of-bounds read occurs when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the same value_size that is not rounded up to 8 bytes. The issue happens when: 1. A CGROUP_STORAGE map is created with value_size not aligned to 8 bytes (e.g., 4 bytes) 2. A pcpu map is created with the same value_size (e.g., 4 bytes) 3. Update element in 2 with data in 1 pcpu_init_value assumes that all sources are rounded up to 8 bytes, and invokes copy_map_value_long to make a data copy, However, the assumption doesn't stand since there are some cases where the source may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data. the verifier verifies exactly the size that the source claims, not the size rounded up to 8 bytes by kernel, an OOB happens when the source has only 4 bytes while the copy size(4) is rounded up to 8. | ||||
| CVE-2026-53070 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: disable BH before calling udp_tunnel_xmit_skb() udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to tunnel xmit functions"), on the path: udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit() dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU. Without local_bh_disable(), the context may move between CPUs, which can break the inc/dec pairing. This may lead to incorrect recursion level detection and cause packets to be dropped in ip(6)_tunnel_xmit() or __dev_queue_xmit(). Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths. In my testing, after enabling the SCTP over UDP: # ip net exec ha sysctl -w net.sctp.udp_port=9899 # ip net exec ha sysctl -w net.sctp.encap_port=9899 # ip net exec hb sysctl -w net.sctp.udp_port=9899 # ip net exec hb sysctl -w net.sctp.encap_port=9899 # ip net exec ha iperf3 -s - without this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender [ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver - with this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver | ||||
| CVE-2026-53053 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix clone_alias() to use the original device's devid Currently clone_alias() assumes first argument (pdev) is always the original device pointer. This function is called by pci_for_each_dma_alias() which based on topology decides to send original or alias device details in first argument. This meant that the source devid used to look up and copy the DTE may be incorrect, leading to wrong or stale DTE entries being propagated to alias device. Fix this by passing the original pdev as the opaque data argument to both the direct clone_alias() call and pci_for_each_dma_alias(). Inside clone_alias(), retrieve the original device from data and compute devid from it. | ||||
| CVE-2026-53027 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked() When a compressed or sparse attribute has its clusters frame-aligned, vcn is rounded down to the frame start using cmask, which can result in vcn != vcn0. In this case, vcn and vcn0 may reside in different attribute segments. The code already handles the case where vcn is in a different segment by loading its runs before allocation. However, it fails to load runs for vcn0 when vcn0 resides in a different segment than vcn. This causes run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was never loaded into the in-memory run list, triggering the WARN_ON(1). Fix this by adding a missing check for vcn0 after the existing vcn segment check. If vcn0 falls outside the current segment range [svcn, evcn1), find and load the attribute segment containing vcn0 before performing the run lookup. The following scenario triggers the bug: attr_data_get_block_locked() vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment load runs for vcn segment <- vcn0 segment not loaded! attr_allocate_clusters() <- allocation succeeds run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN WARN_ON(1) <- bug fires here! | ||||
| CVE-2026-53025 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: <TASK> cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f The cdev is contained in the "gb_raw" structure, which is freed in the disconnect operation. When the cdev is released at a later time, cdev_put gets an address that points to freed memory. To fix this use-after-free, convert the struct device from a pointer to being embedded, that makes the lifetime of the cdev and of this device the same. Then, use cdev_device_add, which guarantees that the device won't be released until all references to the cdev have been released. Finally, delegate the freeing of the structure to the device release function, instead of freeing immediately in the disconnect callback. | ||||